German MYTRI tools MYTRI model MYTRI price

MYTRI tools utilize electromagnetic technologies such as permanent magnets to assist in mechanical manufacturing processes. They can be categorized into magnetic fixtures, magnetic tools, magnetic molds, and magnetic auxiliary devices. The use of magnetic tools can significantly improve production efficiency and reduce the physical workload of employees. For some workpieces, clamping is inconvenient during machining and assembly due to their structural characteristics. Simply position the U-shaped iron core vertically on the worktable for processing. By embedding a magnet in the positioning block of the fixture, the workpiece can be firmly attracted to the worktable equipped with the positioning block and accurately positioned. This greatly simplifies the fixture structure and improves work efficiency. Some products require welding small parts onto the workpiece; if accurate positioning is not achieved, it not only makes the work difficult but also fails to meet requirements.

MYTRI tool types

1) Frame saw. Also known as a rack saw, it consists of an I-shaped wooden frame, twisted rope and twist pieces, saw blade, etc. Both ends of the saw blade are fixed to the frame with knobs, which can also be used to adjust the angle of the saw blade. After the twisted rope is tightened, the saw blade is taut and ready for use. Frame saws can be divided into coarse, medium, and fine types based on saw blade length and tooth pitch. Coarse saw blades are 650—750mm long, with a tooth pitch of 4—5mm. Coarse saws are mainly used for cutting thicker wood; medium saw blades are 550—650mm long, with a tooth pitch of 3—4mm. Medium saws are mainly used for cutting thin wood or cutting tenons; fine saw blades are 450—500mm long, with a tooth pitch of 2—3mm. Fine saws are mainly used for cutting finer wood and cutting tenon shoulders. 2) Knife saw. The knife saw mainly consists of two parts: the saw edge and the saw handle. It can be divided into single-sided, double-sided, back-backed knife saws, etc. The single-sided knife saw is 350mm long, with teeth on one side. Depending on the function of the teeth, it can be divided into rip cut and cross cut types; the double-sided knife saw is 300mm long, with teeth on both sides. The teeth on both sides are generally rip cut on one side and cross cut on the other. The back-backed knife saw plate is 250—300mm long. The back of the back-backed knife saw is straightened with a steel strip, and the teeth are finer. It is divided into rip cut and cross cut saws. 3) Groove saw. The groove saw consists of a handle and a saw blade, with the saw blade being approximately 200mm long. Groove saws are mainly used for cutting grooves in wood. 4) Panel saw. Also known as a hand saw. It consists of a handle and a saw blade, with the saw blade being approximately 250—750mm long and a tooth pitch of 3—4mm. Panel saws are mainly used for cutting wider wooden boards. 5) Narrow hand saw. The saw blade is narrow and long, with a pointed front end, approximately 300—400mm in length. Narrow hand saws are mainly used for cutting narrow holes and slots. 6) Coping saw. Also known as a bow saw, its construction is the same as that of a frame saw, but the saw blade is narrower (approximately 10mm), mainly used for cutting arcs, curves, and other parts. 7) Wire saw. Also known as a bow saw, it is made by bending a bamboo strip into a bow shape and stretching wire across both ends. Saw-toothed flying edges are chiseled onto the wire, using the sharp edges of the flying edges for cutting. The wire is approximately 200—600mm long, and the saw bow is 800—900mm long. Wire saws are mainly used for cutting complex curves and opening holes.

MYTRI tool usage

1) Select an appropriate saw blade for the workpiece. For example, use 14 teeth per inch for cutting solid or thick soft metals; use 18 teeth per inch for tool steel, iron pipes, and hard metals; and use 24 teeth per inch for cutting metal sheets, metal pipes, and thin iron bars. 2) Push the saw forward, and lift it slightly when pulling back. 3) Select a wrench of appropriate size according to the nature of the work. 4) When using an adjustable wrench, apply force to the fixed jaw, never to the movable jaw. 5) If the wrench jaws are worn or slip during use, discontinue use immediately to prevent slipping. 6) Do not use a wrench as a hammer for striking. 5. Do not fit a pipe over the handle end of a wrench to increase torque. 7) Press the inner side of the first leg of the square against the edge of the wooden board, and draw along the inner side of the second leg with a pencil to mark a perpendicular line. 8) Select a screwdriver appropriate for the size and shape of the screw head slot. 9) Do not strike the screwdriver handle with a hammer; replace handles that are damaged immediately. 10) Do not use a screwdriver as a chisel or lever. 11) Use an electrician's screwdriver to test current; do not use a standard screwdriver to test high voltage. 12) Do not grind the tip of the screwdriver to avoid damaging the hardened surface. 13) Do not carry screwdrivers in shirt or trouser pockets to prevent injury from collision or falling.

MYTRI tool types and features

Hydraulic tools include: hydraulic wrenches, special electric pumps for hydraulic wrenches, hydraulic jacks, hydraulic bolt tensioners, hydraulic flange separators, hydraulic nut splitters, hydraulic pullers, etc. Hydraulic tools have the advantages of high efficiency and convenience. 1) Generally use mineral oil as the working medium. The relative moving surfaces can self-lubricate, resulting in a long service life. 2) Light weight, small volume, small motion inertia, and fast response speed. 3) Various components of hydraulic transmission can be conveniently and flexibly arranged according to needs. 4) Overload protection can be automatically achieved. 5) Convenient operation and control, capable of achieving a wide range of stepless speed regulation (speed regulation range up to 2000: 1). 6) Linear motion is easily achieved. 7) Machine automation is easily achieved. When using electro-hydraulic combined control, not only a higher degree of automatic control process can be achieved, but remote control can also be realized.

Weidou Intelligent Technology specializes in selling German MYTRI workpiece fixtures, MYTRI hydraulic tools, MYTRI power tools, MYTRI pneumatic tools, MYTRI hand tools, MYTRI electronic tools, MYTRI welding tools, MYTRI piping tools, MYTRI explosion-proof tools, MYTRI electrical tools, MYTRI automotive maintenance tools, MYTRI fastening tools, MYTRI cutting tools, MYTRI striking tools, MYTRI grinding tools, MYTRI original German imports. Welcome customers to inquire and order.