German Mondial tools Mondial models Mondial prices

Mondial tools utilize electromagnetic technologies such as permanent magnets to assist in mechanical manufacturing processes. They can be categorized into magnetic fixtures, magnetic tools, magnetic molds, and magnetic auxiliary devices. The use of magnetic tools can significantly improve production efficiency and reduce the physical workload of employees. For some workpieces, clamping is inconvenient during machining and assembly due to their structural characteristics. By vertically positioning the U-shaped iron core on the worktable for processing, one only needs to embed a magnet in the locating block of the fixture to firmly attract the workpiece to the worktable equipped with the locating block, ensuring accurate positioning. This greatly simplifies the fixture structure and improves work efficiency. Some products require welding small parts onto the workpiece; if accurate positioning is not achieved, it not only makes the work difficult but also fails to meet requirements.

Mondial tool classification

1) Electric planer: It is one of the main tools used in woodworking decoration. It is mainly used for planing flat and straight surfaces of various woods. Products are divided into short planers and rough planers. Rough planers are mainly used for planing flat wood surfaces and can process relatively large board surfaces; short planers, in addition to board surface planing, can also be used with various guide plates for planing tongues, borders, and grooves. The main features of using a handheld electric planer are small size, light weight, portability, and ease of use. Compared with manual tools, it can greatly reduce labor intensity and improve processing efficiency and quality. When using a handheld electric planer, hold the handle at the rear of the planer body with your right hand and slightly raise the center of gravity of the rear part. After starting the power with your left hand, hold the guide handle at the front of the planer, keeping the front center of gravity lower. Follow the operation sequence where the front of the planer contacts the wood first. When the rear center of gravity gradually and steadily contacts the planing surface of the wood, push the planer body forward smoothly in the direction of planing with both hands. After the planer body completes the planing stroke, lift the front of the planer with your left hand, then pick it up with both hands and return to the starting point for the next pass. Repeat this until all planing is completed. 2) Jigsaw: Also known as electric coping saw or electric fine saw. It is a multifunctional cutting tool that can cut wooden boards, as well as perform straight or curved cuts on plastic and metal sheets. It is particularly suitable for cutting complex shapes and geometric figures with small radii of curvature. It is an essential multifunctional sawing tool for home renovation and various public interior decoration projects. It features light weight, small size, portability, simple operation, and wide application range. Its cutting principle involves a narrow saw blade with upward-facing teeth. During operation, the blade moves in a linear reciprocating motion up and down to cut, completing various sawing tasks according to size requirements. If used with a guide plate, it can also perform angled bevel processing. When using an electric jigsaw, for smaller and thinner wooden boards, fix them on the workbench first and support the workpiece with your left hand. Then, hold the saw handle with your right hand and push it forward slowly for cutting. Apply steady and uniform force; do not exert excessive force to avoid injury or damage to the blade. For larger boards, ensure the board is securely fixed, then hold the saw handle with both hands and push forward for sawing. Operate along the marked line and always keep the blade perpendicular to the board surface to prevent jamming or binding. 3) Circular saw: Also known as a small handheld circular saw. It is a new type of handheld small electric saw equipped with a spring-loaded automatic safety guard and an electronically controlled constant-speed motor. It features simple operation, flexible use, quick adjustment, and high safety and reliability. It is very suitable for home renovation tasks such as cutting various wooden boards and artificial fiberboards. The thickness of wood or boards being cut should generally be 60mm or less. 4) Sanding tools: Also known as small handheld grinders. They are mainly used for sanding bare wood before painting various wood finishes, and can also be used for sanding putty coatings. However, sanding putty generates significant dust, which seriously pollutes the environment, so enhanced labor protection is required during operation. Handheld grinders include belt sanders and orbital sanders. Belt sanders are mainly used for rapid sanding of wooden components and products, while orbital sanders are commonly used for sanding large areas such as wooden floors in home renovations. 5) Small engraving machine: Also known as a groove planner or trimmer. It can be used for grooving, tenoning, drilling, trimming, milling, and edge finishing on various wooden products and components. It can also be used for simple trimming, milling, grooving, and edge finishing on light metal materials such as aluminum alloy and plastic steel, such as aluminum alloy (or plastic steel) doors and windows, balcony frames, and furniture frames. Therefore, it is also one of the commonly used power tools in modern home renovation projects.

Mondial tool maintenance

1) Correct air supply system: The inlet pressure at the tool entrance (not the outlet pressure of the air compressor) is generally 90PSIG (6.2Kg/cm^2). Pressure that is too high or too low will damage the tool's performance and lifespan. The intake air must contain sufficient lubricating oil to ensure adequate lubrication of the pneumatic motor inside the tool (you can place a white paper at the tool's exhaust to check for oil stains; the presence of oil stains is normal). The intake air must be free of moisture; using compressed air without an air dryer is inappropriate. 2) Do not arbitrarily disassemble tool parts before operation, as this will affect operator safety and cause tool damage. 3) If the tool has minor faults or fails to achieve its original function after use, do not continue using it; inspect it immediately. 4) Regularly (approximately once a week) inspect and maintain the tool. Add Grease to rotating parts such as bearings, and add Oil to the pneumatic motor. 5) When using various tools, strictly adhere to all safety regulations and operating instructions. 6) Select appropriate tools for the job. Tools that are too large can easily cause work injuries, while tools that are too small can easily lead to tool damage.

Mondial tool usage

1) Before use, carefully inspect the tool. Ensure there is no external damage, the switch operates flexibly without sticking, and the power cord and housing of the power tool are intact. Use a 500V megohmmeter to measure the insulation resistance between the winding and the housing; the value must not be less than O.5 megohms. See the attached table for insulation resistance values. 2) Handheld power tools with metal housings must have a reliable protective grounding wire. The power cord should be a multi-core soft rubber-sheathed cable, and the grounding protection wire at both ends must be connected securely. 3) Handheld power tools should be used by dedicated personnel with certain professional knowledge. Strictly abide by relevant safety operating procedures during use. 4) Before use, check whether the relevant electrical and mechanical protection devices are intact and functioning normally. Also, ensure that the rotating parts move flexibly without sticking. 5) When using Class I handheld power tools, users must wear prescribed protective equipment and set up qualified protective gear. Take corresponding anti-electric shock safety measures as required, such as installing residual current devices (RCDs) in the power circuit, or wearing insulating gloves, insulating shoes, or standing on an insulating mat. When using Class II handheld power tools in damp and narrow spaces, install a leakage switch with a working current of less than 1.5mA and an action time of less than or equal to 0.1 seconds. The leakage switch should be placed inside the container and supervised by a dedicated person. 6) Occupational hazards of using handheld power tools. Arm vibration disease caused by long-term hand-transmitted vibration work was listed as one of China's statutory occupational diseases as early as 1957, also known as local vibration disease, typically manifested as episodic white finger.

Weidou Intelligent Technology specializes in selling German Mondial workpiece fixtures, Mondial hydraulic tools, Mondial power tools, Mondial pneumatic tools, Mondial hand tools, Mondial electronic tools, Mondial welding tools, Mondial pipe tools, Mondial explosion-proof tools, Mondial electrical tools, Mondial automotive maintenance tools, Mondial fastening tools, Mondial cutting tools, Mondial striking tools, Mondial grinding tools, Mondial original imports from Germany. Welcome customers to inquire and order.