German MOLEMORESCHI tools MOLEMORESCHI models MOLEMORESCHI prices

MOLEMORESCHI tools refer to implements used in woodworking. They generally have sharp cutting edges, so safety must be prioritized during use. Frequent sharpening is required, especially for planer blades and chisels, which must be kept sharp to ensure ease of use and quality workmanship, as the saying goes, "sharpening the axe does not delay the woodcutting." Woodworking tools are categorized into power tools, pneumatic tools, and hand tools. Power tools are divided by function into multi-function tools (multi-purpose tools) and single-function tools (such as electric planers, jigsaws, circular saws, sanders, and engraving machines); pneumatic tools include polishers and nail guns; hand tools are classified into measuring tools, hand saws, woodworking planes, wood files, hand chisels, and sandpaper.

MOLEMORESCHI tool classification

1) Screwdriver: A tool used to turn screws to position them, typically featuring a thin wedge-shaped tip that inserts into the slot or recess of the screw head—also known as a "screwdriver." 2) Wrench: A hand tool that uses the lever principle to turn bolts, screws, nuts, and other threaded fasteners via an open-end or box-end socket. Wrenches typically have jaws at one or both ends of the handle to apply external force; applying force to the handle allows turning of the bolt or nut. Apply force along the direction of thread rotation to turn the bolt or nut. 3) Hammer: A tool used to strike objects to move or deform them. It is most commonly used to drive nails, straighten, or split objects. Hammers come in various forms; the common form consists of a handle and a head. One side of the head is flat for striking, while the other is the hammer head. The hammer head can be shaped like a claw for pulling nails, or wedge-shaped. There are also ball-peen hammer heads. 4) Test pen: Also called a voltage tester, abbreviated as "electric pen." It is an electrical tool used to test whether wires are live. The pen body contains a neon bulb; if the bulb lights up during testing, it indicates the wire is live or is the live wire in a circuit. The tip and tail of the test pen are made of metal, while the pen shaft is made of insulating material. When using a test pen, you must touch the metal part at the tail end with your hand; otherwise, because the live object, test pen, human body, and ground do not form a circuit, the neon bulb will not light up, leading to a misjudgment that the live object is not energized. 5) Tape measure: A tape measure is a common measuring tool in daily life. Steel tape measures are frequently seen, commonly used in construction and decoration, and are essential household tools. Types include fiber tape measures, leather tapes, and waist tapes. Lu Ban rulers, Feng Shui rulers, and Wen Gong rulers also belong to the category of steel tape measures. 6) Utility knife: A type of knife with a sharp blade used for cutting wallpaper and similar materials, hence the name "wallpaper knife," also known as a "utility knife." It is frequently used in renovation, decoration, and signboard industries. 7) Electrician's knife: An electrician's knife is a cutting tool commonly used by electricians. A standard electrician's knife consists of a blade, cutting edge, handle, and clip. When not in use, the blade retracts into the handle. The base of the blade is hinged to the handle, featuring scale lines and markings; the front end forms a screwdriver tip, both sides have file surfaces, the cutting edge has a concave curved blade section ending in a point, and the handle has a protection button to prevent blade rebound. The electrician's knife blade integrates multiple functions, allowing various wire connection operations to be completed with just one tool, eliminating the need to carry other tools, offering benefits such as simple structure, ease of use, and versatility. 8) Hacksaw: Includes hand saws (for household and woodworking use), pruning saws (for branch trimming), folding saws (for branch trimming), bow saws, coping saws (woodworking), rip saws (woodworking), and crosscut saws (woodworking). 9) Spirit level: A spirit level contains a bubble vial and can be used to inspect, measure, and debug whether equipment is installed level. 10) Combination pliers: Combination pliers are clamping and cutting tools consisting of a head and handles. The head includes jaws, gripping teeth, cutting edges, and a wire cutter. The functions of the plier parts are: (1)) The gripping teeth can be used to tighten or loosen nuts; (2)) The cutting edges can be used to strip rubber or plastic insulation from soft wires, and to cut wires and iron wires; (3)) The wire cutter can be used to cut harder metal wires such as electrical wires and steel wires; (4)) The insulating plastic sleeves on the pliers withstand voltages above 500V, allowing live wire cutting. 11) Needle-nose pliers: Also called long-nose pliers, primarily used to cut fine single-strand and multi-strand wires, bend loops on single-strand wire connectors, and strip plastic insulation. They are also common tools for electricians (especially interior electricians). They consist of pointed tips, cutting edges, and handles. Electrician's needle-nose pliers have insulating sleeves rated for 500V on the handles. Due to their pointed tips, they are suitable for operations in narrow spaces. To bend wire connectors with needle-nose pliers: first fold the wire end to the left, then bend it clockwise to the right against the screw. 12) Wire strippers: Wire strippers are common tools for interior electricians, motor repair technicians, and instrumentation electricians, as shown in the figure below. They consist of cutting edges, wire crimping slots, and handles. The handles of wire strippers are fitted with insulating sleeves rated for 500V. Wire strippers are suitable for stripping insulation from plastic and rubber insulated wires and cable cores. Usage: Place the wire end to be stripped into the blade slot of the head, squeeze the two handles together, then release; the insulation will separate from the core wire.

MOLEMORESCHI tool usage

1) Select the appropriate saw blade for the workpiece, for example, use 14 teeth per inch for cutting solid or thick soft metals; 18 teeth per inch for tool steel, iron pipes, and hard metals; and 24 teeth per inch for cutting metal sheets, metal pipes, and thin iron bars. 2) Push forward to saw, and lift gently when pulling back. 3) Select a wrench of appropriate size according to the nature of the work. 4) When using an adjustable wrench, apply force towards the fixed jaw, never towards the movable jaw. 5) If the wrench opening is worn or slips during use, discontinue use immediately to prevent slipping. 6) Do not use a wrench as a hammer for striking. 5) Do not slip a pipe over the wrench handle to increase torque. 7) Press the inner side of the first leg of the square against the edge of the wooden board, and draw a perpendicular line with a pencil along the inner side of the second leg. 8) Select a screwdriver appropriate for the size and shape of the screw head slot. 9) Do not strike the screwdriver handle with a hammer; replace damaged handles immediately. 10) Do not use a screwdriver as a chisel or lever. 11) Use an electrician's screwdriver to test current; do not use ordinary screwdrivers to test high voltage. 12) Do not grind the screwdriver tip to avoid damaging the hardened surface. 13) Do not keep screwdrivers in shirt or trouser pockets to avoid injury from collision or falling.

MOLEMORESCHI tool types and features

Hydraulic tools include: hydraulic wrenches, dedicated electric pumps for hydraulic wrenches, hydraulic jacks, hydraulic bolt tensioners, hydraulic flange spreaders, hydraulic nut splitters, hydraulic pullers, etc. Hydraulic tools offer the advantages of high efficiency and convenience. 1) Generally use mineral oil as the working medium; relative moving surfaces are self-lubricating, resulting in long service life. 2) Light weight, small volume, low motion inertia, and fast response speed. 3) Various hydraulic transmission components can be arranged conveniently and flexibly as needed. 4) Automatic overload protection can be achieved. 5) Operation and control are convenient, enabling wide-range stepless speed regulation (speed regulation range up to 2000:1). 6) Linear motion is easily achieved. 7) Machine automation is easily achieved; when electro-hydraulic combined control is adopted, not only a higher degree of automatic control can be realized, but remote control is also possible.

Weidou Intelligent Technology specializes in selling German MOLEMORESCHI workholding fixtures, MOLEMORESCHI hydraulic tools, MOLEMORESCHI power tools, MOLEMORESCHI pneumatic tools, MOLEMORESCHI hand tools, MOLEMORESCHI electronic tools, MOLEMORESCHI welding tools, MOLEMORESCHI piping tools, MOLEMORESCHI explosion-proof tools, MOLEMORESCHI electrical power tools, MOLEMORESCHI automotive maintenance tools, MOLEMORESCHI fastening tools, MOLEMORESCHI cutting tools, MOLEMORESCHI striking tools, MOLEMORESCHI grinding tools, all original imports from Germany. Welcome inquiries and orders from customers.