German MICROFINISH tools MICROFINISH models MICROFINISH prices

MICROFINISH tools refer to implements used in woodworking. They generally have sharp cutting edges, so safety must be prioritized during use. Frequent sharpening is required, especially for planer blades and chisels; keeping them sharp ensures ease of use and quality workmanship, as implied by the saying "sharpening the axe does not delay the woodcutting." Woodworking tools are categorized into power tools, pneumatic tools, and hand tools. Power tools can be divided by function into multi-function tools (multi-purpose tools) and single-function tools (such as electric planers, jigsaws, circular saws, sanders, and engraving machines); pneumatic tools include polishers and nail guns; hand tools can be divided into measuring tools, hand saws, woodworking planes, wood files, hand chisels, and sandpaper.

MICROFINISH tool classification

1) Screwdriver: A tool used to turn screws to position them, typically featuring a thin wedge-shaped tip that inserts into the slot or recess of the screw head—also known as a "screwdriver." 2) Wrench: A hand tool that uses leverage to turn bolts, screws, nuts, and other threaded fasteners via an open-end or box-end socket. Wrenches typically have jaws at one or both ends of the handle; applying force to the handle allows turning of the bolt or nut. Apply force along the direction of thread rotation to turn the bolt or nut. 3) Hammer: A tool used to strike objects to move or deform them. It is most commonly used to drive nails, straighten, or break apart objects. Hammers come in various forms; a common design consists of a handle and a head. One face of the head is flat for striking, while the other is the hammer head. The head shape can be claw-like or wedge-shaped for pulling nails. There are also ball-peen heads. 4) Test pen: Also called a voltage tester or simply "electric pen." It is an electrical tool used to test whether wires are live. The pen body contains a neon bulb; if the bulb lights up during testing, it indicates the wire is live or is the phase wire in a closed circuit. The tip and tail of the test pen are made of metal, while the shaft is made of insulating material. When using a test pen, you must touch the metal part at the end with your hand; otherwise, no circuit is formed between the live object, the test pen, the human body, and the ground, causing the neon bulb not to light up and leading to misjudgment that the object is not live. 5) Tape measure: A common measuring tool in daily life. Steel tape measures are frequently seen, commonly used in construction and decoration, and are essential household tools. Types include fiber tape measures, leather tapes, and waist tapes. Lu Ban rulers, Feng Shui rulers, and Wen Gong rulers also belong to the category of steel tape measures. 6) Utility knife: A type of knife with a sharp blade used for cutting wallpaper and similar materials, hence the name "wallpaper knife," also known as a "craft knife." Frequently used in renovation, decoration, and signboard industries. 7) Electrician's knife: A cutting tool commonly used by electricians. Standard electrician's knives consist of a blade, cutting edge, handle, and clip. When not in use, the blade retracts into the handle. The base of the blade is hinged to the handle, featuring scale lines and markings; the front end forms a screwdriver tip, both sides have file surfaces, the cutting edge has an inwardly curved gouge ending in a point, and the handle has a safety button to prevent blade rebound. The electrician's knife blade integrates multiple functions, allowing various wire connection operations with just one tool, eliminating the need for other tools, offering benefits such as simple structure, ease of use, and versatility. 8) Hacksaw: Includes hand saws (household, woodworking), pruning saws (branch trimming), folding saws (branch trimming), bow saws, coping saws (woodworking), rip saws (woodworking), and crosscut saws (woodworking). 9) Spirit level: Contains a bubble vial, used to inspect, measure, and adjust whether equipment is installed level. 10) Combination pliers: A clamping and cutting tool consisting of a head and handles. The head includes jaws, serrated grips, cutting edges, and wire cutters. The functions of the plier parts are: (1)) Serrated grips can be used to tighten or loosen nuts; (2)) Cutting edges can be used to strip rubber or plastic insulation from soft wires, or to cut wires and iron wires; (3)) Wire cutters can be used to cut harder metal wires such as electrical wires and steel wires; (4)) The insulating plastic sleeves on the pliers withstand voltages above 500V, allowing live wire cutting. 11) Needle-nose pliers: Also called long-nose pliers, mainly used to cut fine single-strand and multi-strand wires, bend loops on single-strand wire connectors, and strip plastic insulation. They are also common tools for electricians (especially indoor electricians). They consist of pointed tips, cutting edges, and handles. Electrician's needle-nose pliers have insulating sleeves rated for 500V on the handles. Due to their pointed tips, they are suitable for operations in narrow spaces. To bend wire connectors with needle-nose pliers: first fold the wire end to the left, then bend it clockwise to the right against the screw. 12) Wire strippers: Common tools for indoor electricians, motor repair technicians, and instrumentation electricians, as shown in the figure below. They consist of cutting edges, wire crimping slots, and handles. The handles of wire strippers have insulating sleeves rated for 500V. Wire strippers are suitable for stripping insulation from plastic and rubber insulated wires and cable cores. Usage: Place the wire end to be stripped into the cutting edge of the head, squeeze the two handles together, then release; the insulation will separate from the core wire.

MICROFINISH tool maintenance

1) Correct air supply system: The intake pressure at the tool inlet (not the compressor outlet pressure) is generally 90PSIG (6.2Kg/cm^2). Pressure that is too high or too low will damage tool performance and lifespan. The intake air must contain sufficient lubricating oil to ensure adequate lubrication of the pneumatic motor inside the tool (place a white paper at the tool exhaust to check for oil stains; presence of oil stains is normal). The intake air must be free of moisture; using compressed air without an air dryer is inappropriate. 2) Do not arbitrarily disassemble tool parts before operation, as this affects operator safety and may cause tool damage. 3) If the tool has minor faults or fails to perform its original function after use, do not continue using it; inspect it immediately. 4) Regularly (approximately once a week) inspect and maintain the tool, adding grease (Grease) to rotating parts such as bearings, and adding oil (Oil) to the pneumatic motor. 5) When using various tools, strictly adhere to all safety regulations and operating instructions. 6) Select appropriate tools for the job; tools that are too large can easily cause work injuries, while tools that are too small can easily lead to tool damage.

MICROFINISH tool usage

1) Carefully inspect before use: ensure no external damage, flexible switch action without sticking, and intact power cords and tool housings. Use a 500V megohmmeter to measure the insulation resistance between the winding and the housing; it must not be less than O.5 megohms. See the attached table for insulation resistance values. 2) Handheld power tools with metal housings must have reliable protective grounding. The power cord should be a multi-core soft rubber sheathed cable, with secure connections at both ends of the grounding wire. 3) Handheld power tools should be used by specialized personnel with professional knowledge. Strictly observe relevant safety operating procedures during use. 4) Before use, check that related electrical and mechanical protection devices are intact and functioning normally. Also ensure that rotating parts move flexibly without sticking. 5) When using Class I handheld power tools, users must wear prescribed protective equipment and set up qualified protective gear. Take corresponding anti-electric shock safety measures as required, such as installing residual current devices (RCDs) in the power circuit, or having users wear insulating gloves, insulating shoes, or stand on insulating mats. When using Class II handheld power tools in damp, confined spaces, install a leakage switch with a working current of less than 1.5mA and an action time of less than or equal to 0.1 seconds. The leakage switch should be placed inside the container and supervised by dedicated personnel. 6) Occupational hazards of using handheld power tools. Arm vibration disease caused by long-term exposure to hand-transmitted vibration was listed as one of China's statutory occupational diseases in 1957, also known as local vibration disease, typically manifesting as episodic white finger.

Weidou Intelligent Technology professionally sells German MICROFINISH workpiece clamps, MICROFINISH hydraulic tools, MICROFINISH power tools, MICROFINISH pneumatic tools, MICROFINISH hand tools, MICROFINISH electronic tools, MICROFINISH welding tools, MICROFINISH pipe tools, MICROFINISH explosion-proof tools, MICROFINISH electrical power tools, MICROFINISH automotive maintenance tools, MICROFINISH fastening tools, MICROFINISH cutting tools, MICROFINISH striking tools, MICROFINISH grinding tools, MICROFINISH original German imports. Welcome inquiries and orders from users.