German KUKKO tools KUKKO models KUKKO prices

KUKKO tools are tools that work by using compressed air to drive a pneumatic motor and output kinetic energy. According to their basic working methods, they can be divided into: 1) Rotary type (eccentric movable vane type). 2) Reciprocating type (volume piston type). General pneumatic tools mainly consist of the power output part, operation form conversion part, intake and exhaust path part, operation start and stop control part, tool housing and other main parts. Of course, pneumatic tool operation must also have an energy supply part, air filtration and air pressure regulation part, and tool accessories. Main types include air impact wrenches (also called pneumatic wrenches, air wrenches, air ratchets), pneumatic screwdrivers (also called pneumatic drivers, air screwdrivers), pneumatic grinders (also called pneumatic polishers, pneumatic wet grinders, pneumatic sanders, pneumatic grinding machines), pneumatic spray guns, pneumatic rivet guns, pneumatic nut setters, air chisels, air hammers, vibration-damping pneumatic saws, and vibration-damping pneumatic files.

KUKKO tool types

1) Frame saw. Also known as a buck saw, it consists of an I-shaped wooden frame, twisted rope and twist sticks, and a saw blade. Both ends of the saw blade are fixed to the frame with knobs, which can be used to adjust the angle of the saw blade. After the twisted rope is tightened, the saw blade is taut and ready for use. Frame saws can be divided into coarse, medium, and fine types according to the length of the saw blade and tooth pitch. Coarse saw blades are 650—750mm long, with a tooth pitch of 4—5mm. Coarse saws are mainly used for cutting thicker wood; medium saw blades are 550—650mm long, with a tooth pitch of 3—4mm. Medium saws are mainly used for cutting thin wood or cutting tenons; fine saw blades are 450—500mm long, with a tooth pitch of 2—3mm. Fine saws are mainly used for cutting finer wood and cutting tenon shoulders. 2) Knife saw. The knife saw mainly consists of two parts: the saw edge and the saw handle. It can be divided into single-sided, double-sided, and back-backed knife saws. The single-sided knife saw is 350mm long, with teeth on one side. Depending on the function of the teeth, it can be divided into rip cut and crosscut types; the double-sided knife saw is 300mm long, with teeth on both sides. The teeth on both sides are generally rip cut on one side and crosscut on the other. The back-backed knife saw plate is 250—300mm long. The back of the back-backed knife saw is straightened with a steel strip, and the teeth are finer, available in rip cut and crosscut types. 3) Groove saw. The groove saw consists of a handle and a saw blade, with the saw blade being approximately 200mm long. Groove saws are mainly used for cutting grooves in wood. 4) Panel saw. Also known as a hand saw. It consists of a handle and a saw blade, with the saw blade being approximately 250—750mm long and a tooth pitch of 3—4mm. Panel saws are mainly used for cutting wider wooden boards. 5) Narrow hand saw. The saw blade is narrow and long, with a pointed front end, approximately 300—400mm in length. Narrow hand saws are mainly used for cutting narrow holes and slots. 6) Coping saw. Also known as a fret saw, its construction is the same as that of a frame saw, but the saw blade is narrower (approximately 10mm), mainly used for cutting arcs, curves, and other parts. 7) Wire saw. Also known as a bow saw, it is made by bending a bamboo strip into a bow shape and stretching wire across both ends. Saw-toothed flying edges are chopped onto the wire, using the sharp edges of the flying edges for cutting. The wire is approximately 200—600mm long, and the saw bow is 800—900mm long. Wire saws are mainly used for cutting complex curves and opening holes.

KUKKO tool structure composition

The cross-sectional shape and distribution of the magnetic core vary depending on the workpiece. Common structures of electromagnetic chucks include rectangular and circular types. Rectangular magnetic poles are divided into longitudinal and horizontal arrangements. Longitudinal arrangement of rectangular magnetic poles is suitable for fixing larger workpieces; horizontal arrangement of rectangular magnetic poles is suitable for fixing smaller workpieces. Circular chucks are suitable for fixing ring-shaped workpieces or workpieces with more complex shapes. The main characteristics of ordinary electromagnetic chucks are: magnetic lines of force are evenly distributed on the surface of the magnetic disk, electromagnetic suction force cannot be concentrated, and the magnetic force per unit area is relatively small; the direction of magnetic force is perpendicular to the chuck surface and difficult to change, producing only one type of magnetic force for workpieces of the same suction area; the point of action of the magnetic force on the workpiece is limited to the contact surface between the workpiece and the chuck and cannot be changed arbitrarily. Therefore, during machining, there are disadvantages such as low positioning accuracy, insufficient clamping force, narrow scope of application, and low production efficiency.

KUKKO tool usage

1) When placing the diamond dressing tool head into the holder, be careful not to impact the grinding wheel surface. 2) Do not align the single-point diamond dressing tool head vertically with the center of the grinding wheel; it generally needs to be tilted 10-15°. 3) Do not "quench" (i.e., suddenly cool) a heated dressing tool. During dry dressing, the interval between two dressings must be sufficient to allow the heated dressing tool to cool. 4) Do not assume the grinding wheel surface has ideal flatness. At the start of dressing, locate the high points on the grinding wheel and perform dressing. 5) If possible, the amount removed from the grinding wheel each time should not exceed 0.001 inches on the radius of the grinding wheel. Excessive removal can cause premature wear and frequent breakage of the diamond dressing tool head. 6) However, do not remove too little material each time. Grinding wheels used on old or less rigid machine tools may not require dressing. 7) Note that the dressing tool should not remain in one position for too long. This will polish the grinding wheel surface, generate high temperatures, and damage the diamond dressing tool. Rotate the dressing tool at least once a day. 8) Do not continue to use worn or damaged dressing tools. They should be adjusted or replaced in a timely manner. 9) Do not select excessive removal amounts and too fast lateral feed rates during rough dressing, and then select small removal amounts and slow lateral feed rates during fine dressing. This will quickly damage the diamond dressing tool. If possible, it is recommended to select the same lateral feed rate for both rough and fine dressing.

Weidou Intelligent Technology specializes in selling German KUKKO workholding fixtures, KUKKO hydraulic tools, KUKKO power tools, KUKKO pneumatic tools, KUKKO hand tools, KUKKO electronic tools, KUKKO welding tools, KUKKO pipe tools, KUKKO explosion-proof tools, KUKKO electrical tools, KUKKO automotive maintenance tools, KUKKO fastening tools, KUKKO cutting tools, KUKKO striking tools, KUKKO grinding tools, KUKKO original German imports. Welcome customers to inquire and order.