German KLAIN tools, KLAIN models, KLAIN prices

KLAIN tools, also known as hand tools, are distinguished from power tools. They primarily rely on manual force to turn or apply pressure. Hand tools are categorized by application into wrenches, pliers, screwdrivers, tape measures, hammers, sockets, cutting tools, scissors, tool sets, and auxiliary items such as tool carts, with each category having different models. Wrenches include open-end wrenches (fixed wrenches), double box-end wrenches, ratchet wrenches (quick wrenches), combination wrenches, pipe wrenches, T type socket wrenches, cross socket wrenches, and adjustable wrenches; pliers include wire cutters, needle-nose pliers, diagonal pliers, snap-ring pliers, slip-joint pliers, water pump pliers, pipe wrenches, and locking pliers; screwdrivers include slotted, Phillips, Pozidriv, hex, and Torx types; sockets are divided into standard sockets, star sockets (E type sockets), driver sockets (BIT sockets), spark plug sockets, and impact sockets. Common specifications include 1/4", 3/8", and 1/2", where " denotes inches; additionally, each specification is available in 6-point sockets and 12-point sockets; hammers are classified into claw hammers, machinist hammers, ball-peen hammers, rubber mallets, and installation hammers; cutting tools include files, diamond files, tin snips, aviation snips, utility knives, square tube saws, pipe cutters, and bolt cutters. Materials include chrome vanadium steel, carbon steel, and alloy steel.

KLAIN tool applications and usage

Electric hydraulic oil pumps can serve as hydraulic pumps for various hydraulic devices. When paired with other hydraulic tools, electric hydraulic oil pumps enable lifting, pressing, pipe bending, bar bending, straightening, shearing, assembly, disassembly, and other tasks, reducing labor intensity and improving work efficiency. During use, open the air release nut, open the valve on the oil collection block, connect the power supply, and attach the quick connector to the quick coupling of the corresponding hydraulic device. Press the power switch; after the motor runs for 1-2 minutes, close the switch to engage the pressure boost mode. The output hydraulic oil will then perform the required tasks, self-pressurizing as the load increases until reaching 63MPA. After work is completed, open the valve to relieve pressure. Once the hydraulic oil has returned, disconnect the quick connector, tighten the air release nut, unplug the power cord, and close the valve.

KLAIN tool maintenance

1) Correct air supply system: The inlet pressure at the tool entrance (not the compressor outlet pressure) is generally 90PSIG (6.2Kg/cm^2). Excessively high or low pressure damages tool performance and lifespan. The intake air must contain sufficient lubricating oil to ensure adequate lubrication of the pneumatic motor inside the tool (place a white paper at the tool exhaust to check for oil stains; the presence of oil stains is normal). The intake air must be free of moisture; using compressed air without an air dryer is inappropriate. 2) Do not arbitrarily disassemble tool parts before operation, as this compromises operator safety and may damage the tool. 3) If the tool has minor faults or fails to perform its original function after use, do not continue using it; inspect it immediately. 4) Regularly (approximately once a week) inspect and maintain the tool. Add Grease to rotating parts such as bearings, and add Oil to the pneumatic motor. 5) When using various tools, strictly adhere to all safety regulations and operating instructions. 6) Select appropriate tools for the task. Oversized tools can easily cause work-related injuries, while undersized tools can easily lead to tool damage.

KLAIN tool usage

1) Conduct a thorough inspection before use. Ensure there is no external damage, the switch operates flexibly without sticking, and the power cord and tool housing are intact. Use a 500V megohmmeter to measure the insulation resistance between the winding and the housing; it must not be less than O.5 megohms. Refer to the attached table for insulation resistance values. 2) Handheld electric tools with metal housings must have a reliable protective ground wire. The power cord should be a multi-core soft rubber-sheathed cable, with secure connections at both ends of the grounding wire. 3) Handheld electric tools should be operated by dedicated personnel with appropriate professional knowledge. Strictly follow relevant safety operating procedures during use. 4) Before use, check that electrical and mechanical protection devices are intact and functioning normally. Also ensure that rotating parts move flexibly without sticking. 5) When using Class I handheld electric tools, operators must wear prescribed protective equipment and use qualified protective gear. Implement appropriate anti-electric shock safety measures as required, such as installing residual current devices (RCDs) in the power circuit, or having the operator wear insulating gloves, insulating shoes, or stand on an insulating mat. When using Class II handheld electric tools in damp, confined spaces, install a leakage protection switch with a working current of less than 1.5mA and an action time of less than or equal to 0.1 seconds. The leakage protection switch should be placed outside the container and monitored by a dedicated person. 6) Occupational hazards of using handheld electric tools. Arm vibration disease caused by long-term exposure to hand-transmitted vibration was listed as one of China's statutory occupational diseases in 1957, also known as local vibration disease, typically manifested by episodic white finger.

Weidou Intelligent Technology specializes in selling German KLAIN workholding fixtures, KLAIN hydraulic tools, KLAIN power tools, KLAIN pneumatic tools, KLAIN hand tools, KLAIN electronic tools, KLAIN welding tools, KLAIN piping tools, KLAIN explosion-proof tools, KLAIN electrical tools, KLAIN automotive maintenance tools, KLAIN fastening tools, KLAIN cutting tools, KLAIN striking tools, and KLAIN grinding tools. All products are original imports from Germany. We welcome inquiries and orders from customers.