German INCOR tools INCOR models INCOR prices

INCOR tools are material handling tools for lifting or jacking heavy loads, a type of intermittent-duty tool for lifting heavy objects. Most lifting tools begin vertical or combined vertical and horizontal travel after the lifting gear picks up the load, unload at the destination, then return empty to the pickup point to complete one work cycle before performing the second lift. Generally, during operation, lifting tools perform picking, moving, and unloading sequentially, with the corresponding mechanisms operating intermittently. Lifting tools are mainly used to handle unitized goods; when equipped with grabs, they can handle bulk materials such as coal, ore, and grain; when equipped with ladles, they can lift liquid materials such as molten steel. Some lifting tools, such as elevators, can also be used to carry people. In certain application scenarios, lifting equipment is the primary working tool; for example, cranes used for loading and unloading materials at ports and stations are the primary working tools.

INCOR tool applications and usage

Electric hydraulic oil pumps can serve as hydraulic pumps for various hydraulic devices. When paired with other hydraulic tools, electric hydraulic oil pumps can perform multiple tasks such as lifting, forming, pipe bending, bar bending, straightening, shearing, assembly, and disassembly. They reduce labor intensity and improve work efficiency. During use, open the air bleed nut, open the valve on the oil manifold block, connect the power supply, and attach the quick coupler to the quick connector on the compatible hydraulic device. Press the power switch; after the motor runs for 1-2 minutes, close the switch to engage the pressure-boosting state. At this point, the output hydraulic oil will perform various tasks, with the output hydraulic oil self-pressurizing as the load increases until 63MPA. After work is completed, open the valve to relieve pressure. Once the hydraulic oil has returned to the reservoir, disconnect the quick coupler, tighten the air bleed nut, unplug the power cord, and close the valve.

INCOR tool purchasing guide

1) Distinguish between household and professional use based on needs. Most power tools are designed for professionals, so differentiate between professional and general household tools when purchasing. The difference between professional and general household tools usually lies in power rating; professional tools have higher power to help professionals reduce workload, while general household tools involve smaller projects and relatively less workload, so the input power of the tool does not need to be very high. 2) The tool's outer packaging should have clear patterns, no damage, a sturdy plastic case, and durable latches for opening the plastic case. 3) The tool's appearance should have uniform color; plastic parts should have no visible flow marks or indentations, and should have no scratches or impact marks. Assembly misalignment between housing parts should be ≤ 0.5mm. Aluminum castings should have smooth, attractive coatings without defects. The entire unit surface should be free of oil and stains. When held by hand, the switch handle should be flat. The cable length should generally be no less than 2 meters. 4) The nameplate parameters should match those on the CCC certificate. The manual should include the manufacturer's and production plant's detailed address and contact information. The nameplate or certificate of conformity should include a traceable batch number. 5) Hold the tool, connect the power, and frequently operate the switch to start the tool repeatedly. Observe whether the on/off function of the tool switch is reliable. Simultaneously observe whether there are any abnormalities in nearby televisions or fluorescent lamps to confirm whether the tool is equipped with an effective radio interference suppressor. 6) Run the tool under power for one minute. While running, hold the tool by hand; you should not feel any abnormal vibration. Observe the commutation sparks; the commutation spark level should not exceed class 3/2. Generally, looking inward from the tool's air inlet, there should be no obvious arcing on the commutator surface. During operation, there should be no abnormal noise.

INCOR tool types and features

Hydraulic tools include: hydraulic wrenches, dedicated electric pumps for hydraulic wrenches, hydraulic jacks, hydraulic bolt tensioners, hydraulic flange spreaders, hydraulic nut splitters, hydraulic pullers, etc. Hydraulic tools offer the advantages of high efficiency and convenience. 1) Mineral oil is generally used as the working medium; relative motion surfaces are self-lubricating, resulting in long service life. 2) Light weight, compact size, low motion inertia, and fast response speed. 3) Various hydraulic transmission components can be arranged conveniently and flexibly as needed. 4) Overload protection can be automatically implemented. 5) Operation and control are convenient, enabling wide-range stepless speed regulation (speed regulation range up to 2000: 1). 6) Linear motion is easily achieved. 7) Machine automation is easily achieved; when using electro-hydraulic combined control, not only can a higher degree of automatic control be realized, but remote control can also be implemented.

Weidou Intelligent Technology professionally sells German INCOR workholding fixtures, INCOR hydraulic tools, INCOR power tools, INCOR pneumatic tools, INCOR hand tools, INCOR electronic tools, INCOR welding tools, INCOR piping tools, INCOR explosion-proof tools, INCOR electrical power tools, INCOR automotive maintenance tools, INCOR fastening tools, INCOR cutting tools, INCOR striking tools, INCOR grinding tools, INCOR original German imports. Welcome inquiries and orders from users.