German ICO MEC tools, ICO MEC models, ICO MEC prices

ICO MEC tools are tools that work by using compressed air to drive a pneumatic motor and output kinetic energy. According to their basic operating methods, they can be divided into: 1) rotary type (eccentric movable vane type). 2) reciprocating type (volume piston type). General pneumatic tools mainly consist of the power output part, operation form conversion part, intake and exhaust path part, operation start and stop control part, tool housing and other main parts. Of course, pneumatic tool operation must also have an energy supply part, air filtration and air pressure regulation part, and tool accessories. Main types include impact wrenches (also called pneumatic wrenches, air wrenches, air impact wrenches), pneumatic screwdrivers (also called pneumatic drivers, air screwdrivers), pneumatic grinders (also called pneumatic polishers, pneumatic wet grinders, pneumatic sanders, pneumatic grinding machines), pneumatic spray guns, pneumatic rivet guns, pneumatic nut setters, air chisels, air hammers, vibration-damping pneumatic saws, and vibration-damping pneumatic files.

ICO MEC tool classification

1) Tools: In production, the magnetic properties of materials are often utilized to facilitate production, such as magnetic screwdrivers used in electronic product assembly. In machining, a large amount of fine iron chips is generated. These chips flow back with the cooling medium into the recovery container, often causing circuit blockages and making cleaning inconvenient. A magnetic oil trough can be installed on the machine tool. During metal cutting, the cooling medium containing iron chips flows from the worktable oil drain groove into the oil trough. When passing through the filter screen, the iron chips are blocked and accumulate on one side of the filter screen due to the action of ring magnets, while the cooling medium flows into the oil tank through the oil passage. During cleaning, the oil trough can be conveniently lifted to dump the chips. 2) Molds: When bending and forming workpieces with complex shapes, if the center of gravity is offset and the mold is too small, it may cause a cantilever effect, leading to unstable workpiece placement, flipping, or warping. For example, a positioning magnet can be added to the die cavity to assist in workpiece positioning, which reduces the mold volume and increases positioning reliability. 3) Auxiliary tools: In stamping production, steel plates used for processing are stacked together without gaps, and due to atmospheric pressure and other reasons, the sheets stick together, making material handling extremely inconvenient. This problem can be solved by installing a magnetic auxiliary workbench close to the punch press. The working principle is as follows: a baffle is fixed on the workbench, with a magnet installed on one side of the baffle. The sheet metal to be processed is placed closely against the other side of the baffle. During operation, the up-and-down movement of the punch press slider and the vibration caused by the punching force cause the sheets to vibrate vertically. Since the gravity acting on the top sheet is insufficient to overcome the magnetic force, it leans against the baffle, naturally forming a certain gap, which facilitates material handling. The magnetic force can be adjusted by changing the thickness of the baffle. Magnetic force acts like an invisible hand to help hold the workpiece. By cleverly utilizing magnet technology, we simplify the structure of various tools, improve the process performance of workpieces, and make production easier. It is evident that magnetic tools can help us achieve unexpected results.

ICO MEC tool parameters

The most important performance parameters characterizing the basic working capability of lifting tools are the lifting capacity and the working class. (1) Lifting capacity refers to the maximum weight of the load allowed to be lifted under specified working conditions, i.e., the rated lifting capacity. Generally, if equipped with a permanent magnetic chuck (see permanent magnetic lifter), the lifting capacity should also include the weight of the permanent magnetic chuck. (2) Working class is a performance parameter reflecting the overall working status of the lifting tool and is an important basis for designing and selecting lifting tools. It is determined by the total number of work cycles required to be completed during the required service period and the load state. For lifting tools with strong regularity and high repeatability in operation procedures, such as electric hoists for loading and unloading ship cargo at docks, chain hoists used in high-bay warehouses, and hopper lifts for supplying blast furnaces, the work cycle is also an important parameter. The work cycle refers to the time required to complete one work cycle, which depends on the operating speed of the mechanism and is related to the handling distance. The aforementioned lifting tools sometimes also use productivity as an important parameter, usually expressed as the lifting volume completed per hour. In current use, efficiency is the primary consideration, followed by appearance and quality.

ICO MEC tool usage

1) Adjustment of the plane blade: When installing the plane blade, first fit the blade with the cap iron properly, control the distance between the cutting edges of both, and then insert it into the plane body. The cutting edge should be close to the plane sole. Add the wedge, press down slightly, hold the left corner of the plane sole with the left hand, and use the thumb to firmly hold the wedge, cap iron, and plane blade. Use a hammer to correct the cutting edge so that it protrudes from the mouth. The amount of protrusion is proportional to the planing depth; more for rough planing and less for fine planing. To check the protrusion of the blade, lift the plane with the left hand, sole facing up, and look backward with one eye to observe. If the protrusion is inappropriate, lightly tap the upper end of the blade. If it protrudes too much and needs to be retracted, lightly tap the rear end of the plane body. If one corner of the cutting edge protrudes, only lightly tap the upper side surface of the same corner of the blade. 2) Key points for planing: When planing, extend the index fingers of both hands forward to press on the plane body, press the rear part of the blade with the thumbs, and grip the handle tightly with the remaining fingers and palms. Keep the plane body level and apply uniform force with both hands. When pushing forward, increase the force with both thumbs and apply slight pressure with the index fingers. As you reach the front end, gradually reduce the pressure until no pressure is applied. When retracting, slightly lift the rear part of the plane with your hand to prevent the cutting edge from dragging on the wood surface, which can cause dulling. When planing long materials, place the left foot forward, then follow with the right foot. Before planing long materials, check whether the surface to be planed is heartwood or sapwood. Generally, heartwood is cleaner and has clearer grain than sapwood. If it is heartwood, plane in the direction from the root to the tip; if it is sapwood, plane in the direction from the tip to the root. Planing along the wood grain saves effort. Otherwise, it is easy to cause "tear-out," resulting in a rough and uneven surface and requiring significant effort. When starting to plane, the plane sole should be tightly attached to the wood surface. Do not lift the front of the plane at the beginning. When reaching the end, do not let the front of the plane drop (commonly known as "nodding"). Otherwise, the middle part of the planed wood surface will bulge and be uneven. This is a common mistake among beginners and must be corrected.

Weidou Intelligent Technology specializes in selling German ICO MEC workholding fixtures, ICO MEC hydraulic tools, ICO MEC power tools, ICO MEC pneumatic tools, ICO MEC hand tools, ICO MEC electronic tools, ICO MEC welding tools, ICO MEC pipe tools, ICO MEC explosion-proof tools, ICO MEC electrical tools, ICO MEC automotive maintenance tools, ICO MEC fastening tools, ICO MEC cutting tools, ICO MEC striking tools, ICO MEC grinding tools. All products are original imports from Germany. Welcome customers to inquire and order.