German HOLEX tools HOLEX models HOLEX prices

HOLEX tools are any functional tools connected to the edge (joint) of a robot. This may include robot grippers, robot tool changers, robot collision sensors, robot rotary unions, robot pressure tools, compliance devices, robot spray guns, robot deburring tools, robot arc welding torches, robot electric welding torches, etc. Robot end-effectors are generally considered peripheral equipment, accessories, robot tools, or arm-end tools (EOA). Mechanical gripping end-effectors used in industrial robots for loading and unloading are mostly two-finger claw types. Classified by finger motion, they can be divided into translational and rotational types. Classified by mechanical clamping method, they can be divided into external clamping and internal expansion types. Classified by mechanical structural characteristics, they can be divided into electric (electromagnetic), hydraulic, and pneumatic types, as well as their combinations.

HOLEX tool applications and usage

Electric hydraulic oil pumps can serve as hydraulic pumps for various hydraulic instruments. When equipped with other hydraulic tools, electric hydraulic oil pumps can perform lifting, pressing, pipe bending, bar bending, straightening, shearing, assembly, disassembly, and other tasks. They reduce labor intensity and improve work efficiency. During use, open the air release nut, open the switch on the oil collection block, connect the power supply, and attach the quick connector to the quick coupling on the corresponding hydraulic instrument. Press the power switch; after the motor runs for 1-2 minutes, close the switch to the boost state. At this point, the output hydraulic oil will perform various tasks, with pressure automatically increasing as the load increases until reaching 63MPA. After work is completed, open the switch to relieve pressure. Once the hydraulic oil has returned, remove the quick connector, tighten the air release nut, unplug the power cord, and close the switch.

HOLEX tool usage

1) Select the appropriate saw blade for the workpiece. For example, use 14 teeth per inch for cutting solid or thick soft metals; use 18 teeth per inch for tool steel, iron pipes, and hard metals; and use 24 teeth per inch for cutting metal sheets, metal pipes, and thin iron bars. 2) Push the saw forward, and lift it slightly when pulling back. 3) Select wrenches of appropriate size according to the nature of the work. 4) When using an adjustable wrench, apply force toward the fixed jaw, never toward the adjustable jaw. 5) If the wrench jaws are worn or slip during use, do not continue using them to prevent slipping. 6) Do not use a wrench as a hammer for striking. 5) Do not slide a pipe over the wrench handle to increase torque. 7) Press the inner side of the first leg of the square against the edge of the wooden board, and draw along the inner side of the second leg with a pencil to mark a perpendicular line. 8) Select the appropriate screwdriver based on the size and shape of the screw head slot. 9) Do not strike the screwdriver handle with a hammer; replace handles that are damaged immediately. 10) Do not use a screwdriver as a chisel or lever. 11) Use an electrician's screwdriver to test current; do not use ordinary screwdrivers to test high voltage. 12) Do not grind the screwdriver tip to avoid damaging the hardened surface. 13) Do not keep screwdrivers in shirt or trouser pockets to avoid injury from collisions or falls.

HOLEX tool maintenance

1) Set: The set is adjusted using a saw set. When setting, engage the slot of the saw set with the saw teeth and bend them left or right with force. The degree of bending must meet the requirements for the set. 2) Filing: When filing saw teeth, clamp the saw blade in a vise so that the teeth are exposed. Based on the size of the teeth, use a triangular steel file 100–200 mm long. File each tooth from right to left, applying uniform pressure with both hands. Keep one face of the file vertically tight against the lower edge of the tooth, and the other face against the upper edge of the adjacent tooth. If the set of the teeth is disordered, place the saw blade flat on a steel plate and flatten all teeth with a wooden mallet, then reset and refil. Additionally, maintain the saw frame; if damage is found in ropes, nuts, knobs, or wooden joints, adjust or repair them promptly.

Weidou Intelligent Technology specializes in selling German HOLEX workholding fixtures, HOLEX hydraulic tools, HOLEX power tools, HOLEX pneumatic tools, HOLEX hand tools, HOLEX electronic tools, HOLEX welding tools, HOLEX piping tools, HOLEX explosion-proof tools, HOLEX electrical tools, HOLEX automotive maintenance tools, HOLEX fastening tools, HOLEX cutting tools, HOLEX striking tools, HOLEX grinding tools, HOLEX original imports from Germany. Welcome customers to inquire and order.