German hoerger gaessler tools, hoerger gaessler models, hoerger gaessler prices

hoerger gaessler tools utilize electromagnetic technologies such as permanent magnets to assist in mechanical manufacturing processes. They can be categorized into magnetic fixtures, magnetic tools, magnetic molds, and magnetic auxiliary devices. The use of magnetic tools can significantly improve production efficiency and reduce the physical workload of employees. For some workpieces, clamping is inconvenient during machining and assembly due to their structural characteristics. By vertically positioning the U-shaped iron core on the worktable for processing, we only need to embed a magnet in the locating block of the fixture to firmly hold the workpiece by magnetic attraction on the worktable equipped with locating blocks, ensuring accurate positioning. This greatly simplifies the fixture structure and improves work efficiency. Some products require welding small parts onto the workpiece; if accurate positioning is not achieved, it not only makes the work difficult but also fails to meet requirements.

hoerger gaessler tool principles

The principle of hydraulics consists of two hydraulic cylinders of different sizes, filled with water or oil. Water-filled systems are called 'water presses'; oil-filled systems are called 'oil presses'. Each cylinder contains a sliding piston. If a specific pressure is applied to the small piston, according to Pascal's law, the small piston transmits this pressure through the fluid pressure to the large piston, lifting it. Let the cross-sectional area of the small piston be S1, and the downward force applied to the small piston be F1. Thus, the pressure exerted by the small piston on the fluid is P=F1/SI, which is transmitted unchanged in all directions by the fluid. The pressure received by the large piston must also equal P. If the cross-sectional area of the large piston is S2, the upward force F2=PxS2 generated by the pressure P on the large piston is a multiple of the small piston's cross-sectional area. From the above equation, applying a small force to the small piston results in a large force on the large piston. Therefore, hydraulic presses are used for pressing plywood, extracting oil, lifting heavy objects, forging steel, etc.

hoerger gaessler tool parameters

The most important performance parameters characterizing the basic working capability of lifting tools are lifting capacity and working class. (1) Lifting capacity refers to the maximum weight of the load allowed to be lifted under specified working conditions, i.e., the rated lifting capacity. For tools equipped with permanent magnetic chucks (see permanent magnetic lifters), the lifting capacity should also include the weight of the permanent magnetic chuck. (2) Working class is a performance parameter reflecting the overall working status of the lifting tool and is an important basis for designing and selecting lifting tools. It is determined by the total number of work cycles required to be completed during the required service period and the load state. For lifting tools with strong regularity and high repeatability in operation procedures, such as electric hoists for loading and unloading ship cargo at docks, chain hoists for high-bay warehouses, and bucket elevators for supplying blast furnaces, the work cycle is also an important parameter. The work cycle refers to the time required to complete one work cycle, which depends on the mechanism's operating speed and is related to the handling distance. The aforementioned lifting tools sometimes also use productivity as an important parameter, usually expressed as the lifting volume completed per hour. In current usage, efficiency is the primary consideration, followed by appearance and quality.

hoerger gaessler tool operation

1) Single-phase power cords for mobile electric machinery and handheld power tools must use three-core soft rubber cables, and three-phase power cords must use four-core rubber cables; when wiring, the cable sheath should pass into the equipment's junction box and be secured. 2) Before using power tools, check the following: no cracks or damage to the housing and handle; correct and secure connection of protective grounding or neutral wires; intact cables or flexible cords; intact plugs; normal, flexible, and undamaged switches; intact electrical protection devices; intact mechanical guards; and flexible rotating parts. 3) The insulation resistance of power tools should be measured regularly using a megohmmeter with 500V. If the insulation resistance between live parts and the housing is less than 2MΩ, maintenance must be performed. 4) After repairing the electrical parts of power tools, insulation resistance measurement and dielectric strength tests must be conducted. The test voltage is 380V, and the test duration is 1 minutes. 5) Electrical circuits connecting electric machinery and tools should have separate switches or sockets and be equipped with residual current operated protective devices; metal housings must be grounded; connecting multiple devices to a single switch is strictly prohibited. 6) The rated residual operating current of current-type residual current protective devices must not exceed 30mA, and the operating time must not exceed 0.1 seconds; the rated residual operating voltage of voltage-type residual current protective devices must not exceed 36V. 7) The operating switch of electric motor-driven tools should be placed within easy reach of the operator. During breaks, after work, or in case of sudden power outage during operation, the power supply side switch should be disconnected. 8) When using portable or mobile power tools, wear insulating gloves or stand on an insulating mat; when moving the tool, do not lift it by the cord or the rotating parts. 9) When using Class III insulated power tools in damp or acid-containing environments, or inside metal containers, reliable insulation measures must be taken, and a dedicated supervisor must be assigned. The power tool switch should be located within easy reach of the supervisor. 10) The disk surface of magnetic chuck drills should be flat, clean, and rust-free. When performing side drilling or overhead drilling, measures should be taken to prevent the drill body from falling in case of power loss. 11) When using electric wrenches, ensure the reaction torque support is securely positioned and the nut is properly tightened before starting.

Weidou Intelligent Technology specializes in selling German hoerger gaessler workpiece fixtures, hoerger gaessler hydraulic tools, hoerger gaessler power tools, hoerger gaessler pneumatic tools, hoerger gaessler hand tools, hoerger gaessler electronic tools, hoerger gaessler welding tools, hoerger gaessler pipe tools, hoerger gaessler explosion-proof tools, hoerger gaessler electrical tools, hoerger gaessler automotive maintenance tools, hoerger gaessler fastening tools, hoerger gaessler cutting tools, hoerger gaessler striking tools, hoerger gaessler grinding tools, hoerger gaessler original German imports. Welcome customers to inquire and order.