German HABERO tools HABERO models HABERO prices

HABERO tools are any functional tools connected to the edge (joint) of a robot. This may include robot grippers, robot tool changers, robot collision sensors, robot rotary unions, robot pressure tools, compliance devices, robot spray guns, robot deburring tools, robot arc welding torches, robot electric welding torches, and more. Robot end-effectors are generally considered peripheral equipment, accessories, robot tools, or arm-end tools (EOA). Mechanical clamping end-effectors used in industrial loading and unloading robots are mostly two-finger claw types. Classified by finger motion, they can be divided into translational and rotational types. Classified by mechanical clamping method, they can be divided into external clamping and internal expansion types. Classified by mechanical structural characteristics, they can be divided into electric (electromagnetic), hydraulic, and pneumatic types, as well as their combinations.

HABERO tool applications and usage

Electric hydraulic oil pumps can serve as hydraulic pumps for various hydraulic instruments. When equipped with other hydraulic tools, electric hydraulic oil pumps can perform lifting, pressing, pipe bending, bar bending, straightening, shearing, assembly, disassembly, and other tasks, reducing labor intensity and improving work efficiency. During use, open the air release nut, open the switch on the oil collection block, connect the power supply, and attach the quick connector to the quick coupling on the corresponding hydraulic instrument. Press the power switch; after the motor runs for 1-2 minutes, close the switch to set it to the boost state. At this point, the output hydraulic oil will perform various tasks, self-pressurizing as the load increases until 63MPA. After work is completed, open the switch to relieve pressure. Once the hydraulic oil has returned, remove the quick connector, tighten the air release nut, unplug the power cord, and close the switch.

HABERO tool purchasing guide

1) Distinguish between household and professional use as needed. Most power tools are designed for professionals; when purchasing, differentiate between professional and general household tools. The difference usually lies in power: professional tools have higher power to reduce workload for professionals, while household tools have smaller workloads and thus do not require high input power. 2) The tool's outer packaging should have clear patterns, no damage, a sturdy plastic box, and durable latches. 3) The tool's appearance should have uniform color; plastic parts should have no visible flow marks or indentations, scratches, or impact marks. Assembly misalignment between housing parts should be ≤ 0.5mm. Aluminum casting coatings should be smooth, aesthetically pleasing, and undamaged. The entire unit surface should be free of oil and stains. The switch handle should be flat when held. Cable length should generally be no less than 2 meters. 4) Nameplate parameters must match those on the CCC certificate. The manual should include the manufacturer's and factory's detailed address and contact information. The nameplate or certificate of conformity should include a traceable batch number. 5) Hold the tool, connect the power, and frequently operate the switch to start the tool repeatedly. Observe whether the switch's on/off function is reliable. Simultaneously observe nearby TVs and fluorescent lights for abnormalities to confirm the tool is equipped with an effective radio interference suppressor. 6) Run the tool under power for one minute. While holding it, there should be no noticeable abnormal vibration. Observe commutation sparks; they should not exceed level 3/2. Generally, looking into the air inlet, there should be no obvious arcing on the commutator surface. There should be no abnormal noise during operation.

HABERO tool usage

1) Inspect carefully before use: no exterior damage, flexible switch action without sticking, and intact power cords and housing. Use a 500V V megohmmeter to measure insulation resistance between windings and housing; it must not be lower than O.5 MΩ (see attached table for values). 2) Handheld power tools with metal housings must have reliable protective grounding. The power cord should be a multi-core soft rubber-sheathed cable, with secure connections at both ends of the grounding wire. 3) Handheld power tools should be used by dedicated personnel with appropriate professional knowledge. Strictly adhere to relevant safety operating procedures during use. 4) Before use, check that electrical and mechanical protection devices are intact and functioning normally. Ensure rotating parts move flexibly without sticking. 5) When using Class I handheld power tools, users must wear prescribed protective equipment and use qualified protective gear. Take appropriate anti-electric shock measures as required, such as installing residual current devices (RCDs) in the power circuit, or wearing insulating gloves and shoes, or standing on insulating mats. When using Class II handheld power tools in damp, confined spaces, install an RCD with an operating current less than 1.5mA mA and an operating time ≤ 0.1 seconds. The RCD should be placed inside the container and monitored by dedicated personnel. 6) Occupational hazards of using handheld power tools. Arm vibration disease caused by long-term hand-transmitted vibration was listed as one of China's statutory occupational diseases in 1957, also known as local vibration disease, typically manifesting as episodic white finger.

Weidou Intelligent Technology professionally sells German HABERO workpiece clamps, HABERO hydraulic tools, HABERO power tools, HABERO pneumatic tools, HABERO hand tools, HABERO electronic tools, HABERO welding tools, HABERO piping tools, HABERO explosion-proof tools, HABERO electrical power tools, HABERO automotive maintenance tools, HABERO fastening tools, HABERO cutting tools, HABERO striking tools, HABERO grinding tools. HABERO original imports from Germany. Welcome inquiries and orders.