German GLORIA tools GLORIA models GLORIA prices

GLORIA tools integrate hydraulic systems with conventional tools into a single unit. They convert powerful hydraulic power into mechanical motions such as reciprocating linear motion, rotary motion, and orbital motion. A complete hydraulic tool system consists of five components: power elements, actuating elements, control elements, auxiliary elements, and hydraulic oil. Hydraulic tools include: hydraulic wrenches, electric pumps dedicated to hydraulic wrenches, hydraulic jacks, hydraulic bolt tensioners, hydraulic flange spreaders, hydraulic nut splitters, hydraulic pullers, etc. Hydraulic tools offer the advantages of high efficiency and convenience. A complete hydraulic tool system consists of five components: power elements, actuating elements, control elements, auxiliary elements, and hydraulic oil.

GLORIA tool types

1) Frame saw. Also known as a sash saw, it consists of an I-shaped wooden frame, twisted rope and twist pieces, and a saw blade. The two ends of the saw blade are fixed to the frame with knobs, which can also be used to adjust the angle of the blade. After the twisted rope is tightened, the saw blade is taut and ready for use. Frame saws are classified into coarse, medium, and fine types based on blade length and tooth pitch. Coarse saw blades are 650—750mm long, with a tooth pitch of 4—5mm; coarse saws are mainly used for cutting thicker lumber. Medium saw blades are 550—650mm long, with a tooth pitch of 3—4mm; medium saws are mainly used for cutting thin lumber or cutting tenons. Fine saw blades are 450—500mm long, with a tooth pitch of 2—3mm; fine saws are mainly used for cutting finer wood and cutting tenon shoulders. 2) Handled saw. The handled saw mainly consists of two parts: the cutting edge and the handle. It can be classified into single-sided, double-sided, and backed saws. Single-sided handled saws have a blade length of 350mm, with teeth on one side; depending on the function of the teeth, they can be divided into rip-cut and cross-cut types. Double-sided handled saws have a blade length of 300mm, with teeth on both sides; typically, one side is for rip-cutting and the other for cross-cutting. Backed saws have a blade plate length of 250—300mm; the back of the backed saw is reinforced with a steel strip to keep it straight, and the teeth are finer, available in rip-cut and cross-cut versions. 3) Grooving saw. The grooving saw consists of a handle and a saw blade, with the blade being approximately 200mm long. Grooving saws are mainly used for cutting grooves in wood. 4) Panel saw. Also known as a hand saw, it consists of a handle and a saw blade, with the blade being approximately 250—750mm long and a tooth pitch of 3—4mm. Panel saws are mainly used for cutting wider boards. 5) Keyhole saw. The blade is narrow and long, with a pointed tip, and a length of approximately 300—400mm. Keyhole saws are mainly used for cutting narrow holes and slots. 6) Coping saw. Also known as a fret saw, its construction is similar to that of a frame saw, but the blade is narrower (approximately 10mm), mainly used for cutting arcs and curves. 7) Wire saw. Also known as a bow saw, it is made by bending a bamboo strip into a bow shape, with wire stretched between the two ends. Serrations are cut into the wire to create sharp edges for cutting. The wire is approximately 200—600mm long, and the saw bow is 800—900mm long. Wire saws are mainly used for cutting complex curves and making openings.

GLORIA tool structure and composition

The cross-sectional shape and distribution of the magnetic poles vary depending on the workpiece. Common structures of electromagnetic chucks include rectangular and circular types. Rectangular magnetic poles are arranged either longitudinally or transversely. Longitudinal arrangement of rectangular magnetic poles is suitable for securing larger workpieces; transverse arrangement is suitable for securing smaller workpieces. Circular chucks are suitable for securing ring-shaped workpieces or workpieces with complex shapes. The main characteristics of standard electromagnetic chucks are: magnetic flux lines are evenly distributed across the surface of the chuck, magnetic attraction cannot be concentrated, and the magnetic force per unit area is relatively small; the direction of the magnetic force is perpendicular to the chuck surface and difficult to change, producing only one type of magnetic force for workpieces with the same contact area; the point of application of the magnetic force on the workpiece is limited to the contact surface between the workpiece and the chuck and cannot be arbitrarily changed. Therefore, during machining, disadvantages such as low positioning accuracy, insufficient clamping force, narrow scope of application, and low production efficiency exist.

GLORIA tool maintenance

1) Tooth set: The set is adjusted using a tooth setter. When setting the teeth, engage the slot of the setter with the saw teeth and apply force to bend them left or right. The degree of set must meet the requirements for the kerf width. 2) Filing: When filing the saw teeth, clamp the saw blade in a vise so that the teeth are exposed. Select a triangular steel file with a length of 100 to 200 mm according to the size of the teeth. File each tooth sequentially from right to left, applying uniform pressure with both hands. One face of the file should be held vertically and closely against the lower cutting edge of the tooth, while the other face rests against the upper edge of the adjacent tooth. If the tooth set is found to be irregular, place the saw blade flat on a steel plate and use a wooden mallet to flatten all the teeth. Then, perform resetting and refiling. In addition, maintain the saw frame; if damage is found in the ropes, nuts, knobs, or wooden mortise-and-tenon joints, adjust or repair them promptly.

Weidou Intelligent Technology specializes in selling German GLORIA workholding fixtures, GLORIA hydraulic tools, GLORIA power tools, GLORIA pneumatic tools, GLORIA hand tools, GLORIA electronic tools, GLORIA welding tools, GLORIA piping tools, GLORIA explosion-proof tools, GLORIA electrical tools, GLORIA automotive maintenance tools, GLORIA fastening tools, GLORIA cutting tools, GLORIA striking tools, GLORIA grinding tools, GLORIA original imports from Germany. We welcome inquiries and orders from customers.