German GFM MECCANICA tools, GFM MECCANICA models, GFM MECCANICA prices

GFM MECCANICA tools utilize electromagnetic technologies such as permanent magnets to assist in mechanical manufacturing processes. They can be categorized into magnetic fixtures, magnetic tools, magnetic molds, and magnetic auxiliary devices. The use of magnetic tools can significantly improve production efficiency and reduce the physical workload of employees. For some workpieces, clamping is inconvenient during machining and assembly due to their structural characteristics. By vertically positioning a U-shaped iron core on the worktable for processing, one only needs to embed a magnet in the locating block of the fixture to firmly attract the workpiece to the worktable equipped with locating blocks, ensuring accurate positioning. This greatly simplifies the fixture structure and improves work efficiency. Some products require welding small parts onto the workpiece; if accurate positioning is not achieved, it not only makes the work inconvenient but also fails to meet requirements.

GFM MECCANICA tool types

1) Frame saw. Also known as a rack saw, it consists of an I-shaped wooden frame, twisted rope and twist pieces, and a saw blade. Both ends of the saw blade are fixed to the frame with knobs, which can also be used to adjust the angle of the blade. After tightening the twisted rope, the saw blade is taut and ready for use. Frame saws are classified into coarse, medium, and fine types based on blade length and tooth pitch. Coarse saw blades are 650—750mm long, with a tooth pitch of 4—5mm; coarse saws are mainly used for cutting thicker wood. Medium saw blades are 550—650mm long, with a tooth pitch of 3—4mm; medium saws are mainly used for cutting thin wood or cutting tenons. Fine saw blades are 450—500mm long, with a tooth pitch of 2—3mm; fine saws are mainly used for cutting finer wood and cutting tenon shoulders. 2) Knife saw. A knife saw mainly consists of a saw edge and a saw handle, and can be classified into single-sided, double-sided, and back-backed knife saws. Single-sided knife saws have a blade length of 350mm, with teeth on one side; depending on the function of the teeth, they can be divided into rip cuts and cross cuts. Double-sided knife saws have a blade length of 300mm, with teeth on both sides; generally, one side is for rip cuts and the other for cross cuts. Back-backed knife saws have a blade plate length of 250—300mm; the back of the blade is straightened with a steel strip, and the teeth are finer, available in rip cut and cross cut versions. 3) Groove saw. A groove saw consists of a handle and a saw blade, with the blade being approximately 200mm long. Groove saws are mainly used for cutting grooves in wood. 4) Panel saw. Also known as a hand saw, it consists of a handle and a saw blade, with the blade being approximately 250—750mm long and a tooth pitch of 3—4mm. Panel saws are mainly used for cutting wider wooden boards. 5) Narrow hand saw. The blade is narrow and long, with a pointed front end, and a length of approximately 300—400mm. Narrow hand saws are mainly used for cutting narrow holes and slots. 6) Coping saw. Also known as a fret saw, its construction is similar to that of a frame saw, but the blade is narrower (approximately 10mm), mainly used for cutting arcs, curves, and other sections. 7) Wire saw. Also known as a bow saw, it is made by bending a bamboo strip into a bow shape, with steel wire stretched between the two ends. Saw-toothed flying edges are chiseled onto the steel wire, using the sharp edges of these flying edges for cutting. The steel wire is approximately 200—600mm long, and the saw bow is 800—900mm long. Wire saws are mainly used for cutting complex curves and opening holes.

GFM MECCANICA tool usage

1) Select the appropriate saw blade for the workpiece, for example, use 14 teeth per inch for cutting solid or thick soft metals; use 18 teeth per inch for tool steel, iron pipes, hard metals, etc.; and 24 teeth per inch is suitable for cutting metal sheets, metal pipes, and thin iron bars. 2) Push the saw forward, and gently lift it when pulling back. 3) Choose a wrench of appropriate size according to the nature of the work. 4) When using an adjustable wrench, apply force towards the fixed jaw, never towards the movable jaw. 5) If the wrench opening is worn or slips during use, do not continue to use it to avoid slipping. 6) Do not use a wrench as a hammer for striking. 5) Do not slip a pipe over the handle end of a wrench to increase torque. 7) Press the inner side of the first leg of the square against the edge of the wooden board, and draw along the inner side of the second leg with a pencil to mark a perpendicular line. 8) Select the appropriate screwdriver according to the size and shape of the screw head slot. 9) Do not strike the screwdriver handle with a hammer; replace handles that are damaged immediately. 10) Do not use a screwdriver as a chisel or lever. 11) Use an electrician's screwdriver to test current; do not use a general screwdriver to test high voltage. 12) Do not grind the tip of the screwdriver to avoid damaging the hardened surface. 13) Do not keep screwdrivers in shirt or trouser pockets to avoid injury from collision or falling.

GFM MECCANICA tool types and features

Hydraulic tools include: hydraulic wrenches, special electric pumps for hydraulic wrenches, hydraulic jacks, hydraulic bolt tensioners, hydraulic flange spreaders, hydraulic nut splitters, hydraulic pullers, etc. Hydraulic tools offer the advantages of high efficiency and convenience. 1) Generally use mineral oil as the working medium; relative moving surfaces can self-lubricate, resulting in a long service life. 2) Light weight, small volume, low motion inertia, and fast response speed. 3) Various components of hydraulic transmission can be conveniently and flexibly arranged as needed. 4) Automatic overload protection can be realized. 5) Convenient operation and control, capable of achieving a wide range of stepless speed regulation (speed regulation range up to 2000:1). 6) Linear motion is easily achieved. 7) Machine automation is easily achieved; when adopting electro-hydraulic combined control, not only a higher degree of automatic control process can be realized, but remote control can also be achieved.

Weidou Intelligent Technology specializes in selling German GFM MECCANICA workpiece fixtures, GFM MECCANICA hydraulic tools, GFM MECCANICA power tools, GFM MECCANICA pneumatic tools, GFM MECCANICA hand tools, GFM MECCANICA electronic tools, GFM MECCANICA welding tools, GFM MECCANICA piping tools, GFM MECCANICA explosion-proof tools, GFM MECCANICA electrical tools, GFM MECCANICA automotive maintenance tools, GFM MECCANICA fastening tools, GFM MECCANICA cutting tools, GFM MECCANICA striking tools, GFM MECCANICA grinding tools, GFM MECCANICA original imports from Germany. Welcome customers to inquire and order.