German FLUKE tools FLUKE models FLUKE prices

FLUKE tools are any tools connected to the edge (joint) of a robot with specific functions. This may include robot grippers, robot tool changers, robot collision sensors, robot rotary unions, robot pressure tools, compliance devices, robot spray guns, robot deburring tools, robot arc welding torches, robot electric welding torches, etc. Robot end-effectors are generally considered peripheral equipment of the robot, robot accessories, robot tools, or arm-end tools (EOA). Mechanical gripping end-effectors used in industrial robots for loading and unloading are mostly two-finger claw types. Classified by finger motion, they can be divided into translational and rotational types. Classified by mechanical gripping method, they can be divided into external clamping and internal expanding types. Classified by mechanical structural characteristics, they can be divided into electric (electromagnetic), hydraulic, and pneumatic types, as well as their combinations.

FLUKE tool principles

The principle of hydraulics consists of two cylinders of different sizes filled with water or oil. Those filled with water are called "water presses"; those filled with oil are called "oil presses." Each cylinder contains a sliding piston. If a certain pressure is applied to the small piston, according to Pascal's law, the small piston transmits this pressure through the fluid pressure to the large piston, pushing it up. Let the cross-sectional area of the small piston be S1, and the downward force applied to the small piston be F1. Thus, the pressure exerted by the small piston on the fluid is P=F1/SI, which can be transmitted unchanged in all directions through the fluid. The pressure received by the large piston must also equal P. If the cross-sectional area of the large piston is S2, the upward force F2=PxS2 generated by the pressure P on the large piston is a multiple of the small piston's cross-sectional area. From the above equation, applying a small force to the small piston results in a large force on the large piston. Therefore, hydraulic presses are used for pressing plywood, extracting oil, lifting heavy objects, forging steel, etc.

FLUKE tool maintenance

1) Correct air supply system: The intake pressure at the tool inlet (not the compressor outlet pressure) is generally 90PSIG (6.2Kg/cm^2). Pressure that is too high or too low will impair tool performance and lifespan. The intake air must contain sufficient lubricating oil to ensure adequate lubrication of the pneumatic motor inside the tool (place a white paper at the tool exhaust to check for oil stains; the presence of oil stains is normal). The intake air must be free of moisture; using compressed air without an air dryer is inappropriate. 2) Do not arbitrarily disassemble tool parts before operation, as this affects operator safety and causes tool damage. 3) If the tool has minor faults or fails to achieve its original function after use, do not continue using it; inspect it immediately. 4) Regularly (approximately once a week) inspect and maintain the tool, adding grease (Grease) to rotating parts such as bearings, and adding oil (Oil) to the pneumatic motor. 5) When using various tools, strictly adhere to safety regulations and operating instructions. 6) Select appropriate tools for the job; tools that are too large can easily cause work injuries, while tools that are too small can easily cause tool damage.

FLUKE tool precautions

1) Before use, inspect hand tools for damage. Do not use unsafe tools. 2) Keep tools clean, especially the handle areas, to prevent slipping during operation. 3) Wear appropriate personal protective equipment, such as goggles and gloves. 4) Use hand tools with correct posture and technique; maintain stable force application for safety, and avoid excessive force. 5) When using sharp tools, do not point the blade or sharp edges toward others. 6) When not in use, protect blades or sharp edges with covers. Avoid carrying tools by hand or placing them in pockets. 7) Do not misuse hand tools for other purposes. 8) Understand the characteristics of various hand tools and use them correctly.

Weidou Intelligent Technology specializes in selling German FLUKE workpiece fixtures, FLUKE hydraulic tools, FLUKE power tools, FLUKE pneumatic tools, FLUKE manual tools, FLUKE electronic tools, FLUKE welding tools, FLUKE pipe tools, FLUKE explosion-proof tools, FLUKE electrical tools, FLUKE automotive maintenance tools, FLUKE fastening tools, FLUKE cutting tools, FLUKE striking tools, FLUKE grinding tools, FLUKE original German imports. Welcome inquiries and orders from customers.