German famag tools famag model famag price

famag tools powered by electric motors or electromagnets, driving the working head through a transmission mechanism, are called power tools. They are hand-held operating tools that use low-power electric motors or electromagnets as power sources to drive the working head via a transmission mechanism. Power tools are divided into handheld and portable types; handheld power tools are more flexible, convenient, and widely used. Many varieties have become essential tools for production and daily life. There are numerous power tool brands. According to function and application, they are mainly classified into metal cutting power tools, grinding power tools, assembly power tools, and railway power tools. Common power tools include electric drills, electric grinders, electric wrenches and electric screwdrivers, electric hammers and impact drills, concrete vibrators, and electric planers.

famag tool types

1) Frame saw. Also known as a buck saw, it consists of an H-shaped wooden frame, twisted rope and twist pieces, and a saw blade. The two ends of the saw blade are fixed to the frame with knobs, which can also be used to adjust the angle of the blade. After tightening the twisted rope, the saw blade is tensioned and ready for use. Frame saws are classified into coarse, medium, and fine types based on blade length and tooth pitch. Coarse saw blades are 650—750mm long, with a tooth pitch of 4—5mm; coarse saws are mainly used for cutting thicker lumber. Medium saw blades are 550—650mm long, with a tooth pitch of 3—4mm; medium saws are mainly used for cutting thin lumber or cutting tenons. Fine saw blades are 450—500mm long, with a tooth pitch of 2—3mm; fine saws are mainly used for cutting finer wood and cutting tenon shoulders. 2) Hand saw. A hand saw mainly consists of a saw edge and a handle, and can be classified into single-sided, double-sided, and backed hand saws. Single-sided hand saws have a blade length of 350mm, with teeth on one side; depending on the function of the teeth, they can be divided into rip saws and crosscut saws. Double-sided hand saws have a blade length of 300mm, with teeth on both sides; typically, one side is for rip cutting and the other for crosscutting. Backed hand saws have a blade plate length of 250—300mm; the back of the blade is reinforced with a steel strip, the teeth are finer, and they are available as rip saws and crosscut saws. 3) Groove saw. A groove saw consists of a handle and a saw blade, with the blade approximately 200mm long. Groove saws are mainly used for cutting grooves in wood. 4) Panel saw. Also known as a hand saw, it consists of a handle and a saw blade, with the blade approximately 250—750mm long and a tooth pitch of 3—4mm. Panel saws are mainly used for cutting wider boards. 5) Keyhole saw. The blade is narrow and long, with a pointed tip, and a length of approximately 300—400mm. Keyhole saws are mainly used for cutting narrow holes and slots. 6) Coping saw. Also known as a fret saw, its structure is similar to that of a frame saw, but the blade is narrower (approximately 10mm), mainly used for cutting arcs and curves. 7) Wire saw. Also known as a bow saw, it is made by bending a bamboo strip into a bow shape and stretching a wire between the two ends. Saw-tooth-like projections are cut into the wire, using the sharp edges of these projections for cutting. The wire is approximately 200—600mm long, and the saw bow is 800—900mm long. Wire saws are mainly used for cutting complex curves and openings.

famag tool structure and composition

The cross-sectional shape and distribution of the magnetic core vary depending on the workpiece. Common structures of electromagnetic chucks include rectangular and circular types. Rectangular magnetic poles are arranged either longitudinally or transversely. Longitudinal arrangement of rectangular magnetic poles is suitable for securing larger workpieces; transverse arrangement is suitable for securing smaller workpieces. Circular chucks are suitable for securing ring-shaped workpieces or workpieces with complex shapes. The main characteristics of standard electromagnetic chucks are: magnetic flux lines are evenly distributed on the surface of the chuck, magnetic attraction cannot be concentrated, and the magnetic force per unit area is relatively small; the direction of the magnetic force is perpendicular to the chuck surface and difficult to change, producing only one type of magnetic force for workpieces with the same contact area; the point of application of the magnetic force is limited to the contact surface between the workpiece and the chuck and cannot be arbitrarily changed. Therefore, disadvantages during machining include low positioning accuracy, insufficient clamping force, narrow scope of application, and low production efficiency.

famag tool maintenance

1) Tooth setting: The tooth set is adjusted using a tooth setter. When setting the teeth, engage the slot of the tooth setter with the saw teeth and apply force to bend them alternately to the left or right. The degree of set must meet the requirements for the kerf width. 2) Filing: When filing the saw teeth, clamp the saw blade in a vise so that the teeth protrude. Based on the size of the saw teeth, use a triangular steel file 100 to 200 mm in length to file each tooth sequentially from right to left. Apply uniform pressure with both hands. One face of the file should be held vertically and closely against the lower cutting edge of the tooth, while the other face rests against the upper edge of the adjacent tooth. If the tooth set is found to be irregular, place the saw blade flat on a steel plate and use a wooden mallet to flatten all the teeth, then perform resetting and refiling. Additionally, maintain the saw frame; if damage is found in the ropes, nuts, knobs, or wooden mortise-and-tenon joints, adjust or repair them promptly.

Weidou Intelligent Technology specializes in selling German famag workholding fixtures, famag hydraulic tools, famag power tools, famag pneumatic tools, famag hand tools, famag electronic tools, famag welding tools, famag pipe tools, famag explosion-proof tools, famag electrical tools, famag automotive maintenance tools, famag fastening tools, famag cutting tools, famag striking tools, famag grinding tools, famag original imports from Germany. Welcome inquiries and orders from customers.