German EUROGRIND tools EUROGRIND models EUROGRIND prices

EUROGRIND tools, also known as hand tools, are distinguished from power tools. They primarily rely on manual force to turn or apply pressure. Hand tools are categorized by use into wrenches, pliers, screwdrivers, tape measures, hammers, sockets, cutting tools, scissors, tool sets, and auxiliary items such as tool carts; each category has different models. Wrenches include open-end wrenches (fixed wrenches), double box-end wrenches, ratchet wrenches (quick wrenches), combination wrenches, pipe wrenches, T socket wrenches, cross socket wrenches, and adjustable wrenches; pliers include wire cutters, needle-nose pliers, diagonal cutters, snap-ring pliers, slip-joint pliers, water pump pliers, pipe wrenches, and locking pliers; screwdrivers include slotted, Phillips, Pozidriv, hex, and Torx types; sockets are divided into standard sockets, star sockets (E sockets), bit sockets (BIT sockets), spark plug sockets, and impact sockets. Common sizes are 1/4", 3/8", and 1/2", where " denotes inches; each size is available in 6-point and 12-point sockets; hammers include claw hammers, machinist hammers, ball-peen hammers, rubber mallets, and installation hammers; cutting tools include files, diamond files, tin snips, aviation snips, utility knives, square tube saws, pipe cutters, and bolt cutters. Materials include chrome-vanadium steel, carbon steel, and alloy steel.

EUROGRIND tool classification

1) Tools: Magnetic properties of materials are often utilized in production to facilitate processes, such as magnetic screwdrivers used in electronic assembly. In machining, large amounts of fine iron chips are generated. These chips flow back with the coolant into recovery containers, often causing circuit blockages and making cleaning difficult. Installing a magnetic oil trough on the machine tool solves this. During metal cutting, coolant containing iron chips flows from the worktable drain into the oil trough. As it passes through the filter mesh, the chips are blocked and accumulate on one side due to the ring magnet, while the coolant flows into the tank through the oil channel. Cleaning is convenient: simply lift the oil trough and dump the chips. 2) Molds: When bending complex workpieces, offset centers of gravity can cause instability if the mold is too small, leading to tipping or warping. For example, adding a positioning magnet to the die assists in workpiece positioning, reducing mold volume while increasing positioning reliability. 3) Auxiliary equipment: In stamping production, stacked steel plates often stick together due to atmospheric pressure, making material handling difficult. Installing a magnetic auxiliary workbench close to the press solves this problem. The principle is as follows: a baffle is fixed to the workbench, with a magnet on one side. The sheet metal to be processed is placed against the other side of the baffle. During operation, vibrations from the press slider's movement and cutting force cause the sheets to vibrate. The top sheet, unable to overcome the magnetic force due to gravity, leans against the baffle, naturally creating a gap for easy material retrieval. The magnetic force can be adjusted by changing the baffle thickness. Magnetic force acts like an invisible hand to hold workpieces. By cleverly using magnet technology, we simplify tool structures, improve workpiece process performance, and make production easier, demonstrating that magnetic tools can yield unexpected benefits.

EUROGRIND tool structure and composition

The function of power components is to convert the mechanical energy of the prime mover into hydraulic pressure energy. This refers to the oil pump in the hydraulic system, which provides power to the entire system. Hydraulic pumps generally come in gear, vane, and piston configurations. Actuators (such as hydraulic cylinders and hydraulic motors) convert hydraulic pressure energy into mechanical energy to drive loads in linear reciprocating or rotary motion. Control components (i.e., various hydraulic valves) control and regulate the pressure, flow, and direction of the fluid in the hydraulic system. Based on control functions, hydraulic valves are classified into pressure control valves, flow control valves, and directional control valves. Pressure control valves include relief valves (safety valves), reducing valves, sequence valves, and pressure relays; flow control valves include throttle valves, adjustment valves, and flow divider/combiner valves; directional control valves include check valves, pilot-operated check valves, shuttle valves, and directional valves. Based on control methods, hydraulic valves are classified into on/off control valves, fixed-value control valves, and proportional control valves. Auxiliary components include oil tanks, oil filters, oil pipes and fittings, sealing rings, pressure gauges, and oil level/temperature gauges. Hydraulic oil is the working medium for energy transmission in hydraulic systems, including mineral oils, emulsions, and synthetic hydraulic oils.

EUROGRIND tool usage

1) When placing the diamond dressing tool holder into the collet, avoid impacting the grinding wheel surface. 2) Do not align single-point diamond dressing tools vertically with the grinding wheel center; generally, tilt them by 10-15°. 3) Do not "quench" (suddenly cool) heated dressing tools. During dry dressing, maintain sufficient intervals between dressings to allow the heated tool to cool. 4) Do not assume the grinding wheel surface is ideally flat. At the start of dressing, locate the high points on the wheel and proceed with dressing. 5) If possible, the stock removal per dressing should not exceed 0.001 inches on the wheel radius. Excessive removal causes premature wear and frequent breakage of the diamond dressing tool. 6) However, do not remove too little material each time. Wheels used on old or less rigid machines may not require dressing. 7) Avoid holding the dresser in one position for too long during dressing. This polishes the wheel surface, generates high temperatures, and damages the diamond dressing tool. Rotate the dressing tool at least once daily. 8) Do not continue using worn or damaged dressing tools. Adjust or replace them promptly. 9) Do not select excessive stock removal and fast traverse speeds for rough dressing, followed by small removal and slow traverse speeds for finish dressing. This will quickly damage the diamond dressing tool. If possible, use the same traverse speed for both rough and finish dressing.

Weidou Intelligent Technology specializes in selling German EUROGRIND workholding fixtures, EUROGRIND hydraulic tools, EUROGRIND power tools, EUROGRIND pneumatic tools, EUROGRIND hand tools, EUROGRIND electronic tools, EUROGRIND welding tools, EUROGRIND piping tools, EUROGRIND explosion-proof tools, EUROGRIND electrical tools, EUROGRIND automotive maintenance tools, EUROGRIND fastening tools, EUROGRIND cutting tools, EUROGRIND striking tools, and EUROGRIND grinding tools. All products are original imports from Germany. Customers are welcome to inquire and order.