German elora tools elora models elora prices

elora tools: A mechanized tool powered by an electric motor or electromagnet, driving the working head through a transmission mechanism, is called a power tool. It is a hand-held tool that uses a low-power electric motor or electromagnet as the power source to drive the working head via a transmission mechanism. Power tools are divided into handheld and portable types. Handheld power tools are more flexible, convenient, and widely used; many varieties have become essential tools for production and daily life. There are numerous power tool brands. According to function and application, they are mainly classified into metal cutting power tools, grinding power tools, assembly power tools, and railway power tools. Common power tools include electric drills, electric grinders, electric wrenches and electric screwdrivers, electric hammers and impact drills, concrete vibrators, and electric planers.

elora tool applications and usage

The electric hydraulic oil pump can serve as the hydraulic pump for various hydraulic devices. When equipped with other hydraulic tools, the electric hydraulic oil pump can perform lifting, pressing, pipe bending, busbar bending, straightening, shearing, assembly, disassembly, and other tasks, reducing labor intensity and improving work efficiency. During use, open the air release nut, turn on the switch on the oil collection block, connect the power supply, and attach the quick connector to the quick coupling of the corresponding hydraulic device. Press the power switch; after the motor runs for 1-2 minutes, turn off the switch to set it to the pressure-boosting state. At this point, the output hydraulic oil will perform various tasks, self-pressurizing as the load increases until 63MPA. After work is completed, open the switch to relieve pressure. Once the hydraulic oil has returned, remove the quick connector, tighten the air release nut, unplug the power cord, and close the switch.

elora tool purchasing guide

1) Distinguish between household and professional use based on needs. Most power tools are designed for professionals; when purchasing, differentiate between professional and general household tools. The difference usually lies in power: professional tools have higher power to help professionals reduce workload, while household tools handle smaller projects and lighter workloads, so high input power is not required. 2) The outer packaging should have clear patterns, no damage, a sturdy plastic box, and durable latches. 3) The tool's appearance should have uniform color; plastic surfaces should have no visible flow marks or indentations, scratches, or impact marks. Assembly misalignment between housing parts should be ≤ 0.5mm. Aluminum casting coatings should be smooth, aesthetically pleasing, and undamaged. The entire unit should be free of oil and stains. When held, the switch handle should be flat. The cable length should generally be no less than 2 meters. 4) The nameplate parameters must match those on the CCC certificate. The manual should include the manufacturer's and factory's detailed address and contact information. The nameplate or certificate of conformity should include a traceable batch number. 5) Hold the tool, connect the power, and frequently operate the switch to start the tool repeatedly. Observe whether the switch's on/off function is reliable. Simultaneously observe nearby TVs and fluorescent lights for abnormalities to confirm the tool is equipped with an effective radio interference suppressor. 6) Run the tool for one minute. While holding it during operation, you should not feel any abnormal vibration. Observe the commutation sparks; they should not exceed level 3/2. Generally, looking inward from the tool's air inlet, there should be no obvious arcing on the commutator surface. There should be no abnormal noise during operation.

elora tool operation

1) For mobile electric machinery and handheld electric tools, single-phase power cords must use three-core flexible rubber cables, and three-phase power cords must use four-core rubber cables; during wiring, the cable sheath must pass into the equipment's junction box and be secured. 2) Before using electric tools, check the following: the housing and handle are free of cracks and damage; the protective grounding or neutral bonding connection is correct and secure; the cable or flexible cord is intact; the plug is intact; the switch operates normally, flexibly, and without damage; electrical protection devices are intact; mechanical guards are intact; and rotating parts move freely. 3) The insulation resistance of electric tools should be measured regularly using a megohmmeter with 500V; if the insulation resistance between live parts and the housing is less than 2M Ω, maintenance must be performed. 4) After repairing the electrical parts of an electric tool, insulation resistance measurement and dielectric withstand voltage tests must be conducted; the test voltage is 380V, and the test duration is 1 minutes. 5) Electrical circuits connecting electric machinery and tools shall have individual switches or sockets, and residual current operated protective devices shall be installed; metal housings shall be grounded; it is strictly prohibited to connect multiple devices to a single switch. 6) The rated residual operating current of current-type residual current operated protective devices shall not exceed 30mA, and the operating time shall not exceed 0.1 seconds; the rated residual operating voltage of voltage-type residual current operated protective devices shall not exceed 36V. 7) The operating switch of motor-driven tools shall be located within easy reach of the operator. During breaks, at the end of work, or in case of sudden power failure during operation, the supply-side switch shall be disconnected. 8) When using portable or mobile electric tools, wear insulating gloves or stand on an insulating mat; when moving the tool, do not lift it by the cord or the rotating parts. 9) When using Class III insulated electric tools in damp or acid-containing environments, or inside metal containers, reliable insulation measures must be taken and a dedicated supervisor assigned. The switch of the electric tool shall be located within easy reach of the supervisor. 10) The magnetic surface of magnetic base drills shall be flat, clean, and rust-free; when performing side drilling or overhead drilling, measures shall be taken to prevent the drill body from falling in case of power loss. 11) When using an electric wrench, ensure the reaction torque support is firmly positioned and the nut is properly tightened before starting.

Weidou Intelligent Technology specializes in selling German elora workholding fixtures, elora hydraulic tools, elora power tools, elora pneumatic tools, elora hand tools, elora electronic tools, elora welding tools, elora pipe tools, elora explosion-proof tools, elora electrical power tools, elora automotive maintenance tools, elora fastening tools, elora cutting tools, elora striking tools, elora grinding tools. elora original imports from Germany. Welcome inquiries and orders.