German dronco tools dronco models dronco prices

dronco tools integrate hydraulic systems with conventional tools into a unified whole. They convert powerful hydraulic power into mechanical motions such as reciprocating linear motion, rotary motion, and orbital motion. A complete hydraulic tool system consists of five components: power elements, actuating elements, control elements, auxiliary elements, and hydraulic oil. Hydraulic tools include: hydraulic wrenches, electric pumps dedicated to hydraulic wrenches, hydraulic jacks, hydraulic bolt tensioners, hydraulic flange spreaders, hydraulic nut splitters, hydraulic pullers, etc. Hydraulic tools offer the advantages of high efficiency and convenience. A complete hydraulic tool system consists of five components: power elements, actuating elements, control elements, auxiliary elements, and hydraulic oil.

dronco tool description

Lifting tools vary in application and construction, but all feature a hoisting mechanism to perform the basic lifting and lowering action. Materials can be lifted or lowered while suspended by flexible members such as wire ropes or lifting chains, or raised by rigid members such as screws. Based on structure, lifting tools are categorized into light-duty lifting equipment, hoists, and overhead monorail systems. Light-duty lifting equipment mainly includes lifting pulleys, rigging, jacks, triangular hand chain hoists, electric hoists, and standard winches. Most are compact, lightweight, and simple to use. Except for electric hoists, the majority are manually driven and suitable for less demanding tasks. They can be used individually or in combination. Some light-duty lifting equipment has significant lifting capacity; for example, the lifting capacity of hydraulic jacks has reached 750 tons. Mine hoists and bucket elevators primarily perform vertical or near-vertical lifting and lowering movements along fixed paths. Overhead monorail systems utilize routes formed by rigid suspension rails, enabling material transport to various parts of a workshop and extending to areas outside the workshop.

dronco tool maintenance

1) Correct air supply system: The intake pressure at the tool inlet (not the compressor outlet pressure) is generally 90PSIG (6.2Kg/cm^2). Excessively high or low pressure impairs tool performance and service life. The intake air must contain sufficient lubricating oil to ensure adequate lubrication of the pneumatic motor inside the tool (place a white paper at the tool exhaust to check for oil stains; the presence of oil stains is normal). The intake air must be free of moisture; using compressed air without an air dryer is inappropriate. 2) Do not operate the tool after arbitrarily disassembling its parts, as this compromises operator safety and causes tool damage. 3) If the tool malfunctions slightly or fails to perform its original function after use, do not continue using it; inspect it immediately. 4) Inspect and maintain the tool regularly (approximately once a week). Apply Grease to rotating parts such as bearings, and apply Oil to the pneumatic motor. 5) When using various tools, strictly adhere to all safety regulations and operating instructions. 6) Select appropriate tools for the job. Oversized tools easily cause work-related injuries, while undersized tools are prone to damage.

dronco tool maintenance

1) Set: The set is adjusted using a saw set. When setting, engage the slot of the saw set with the teeth and push them left or right with force. The degree of set must meet the requirements for the kerf. 2) Filing: When filing the teeth, clamp the saw blade in a vise so that the teeth protrude. Depending on the tooth size, use a triangular steel file 100 to 200 mm in length. File each tooth from right to left, applying uniform pressure with both hands. Keep one face of the file vertically tight against the lower cutting edge of the tooth, and the other face against the upper edge of the adjacent tooth. If the set of the teeth is irregular, place the saw blade flat on a steel plate and flatten all teeth with a wooden mallet, then reset and refile. Additionally, maintain the saw frame. If damage is found in ropes, nuts, knobs, or wooden joints, adjust or repair them promptly.

Weidou Intelligent Technology specializes in selling German dronco workholding fixtures, dronco hydraulic tools, dronco power tools, dronco pneumatic tools, dronco hand tools, dronco electronic tools, dronco welding tools, dronco piping tools, dronco explosion-proof tools, dronco electrical tools, dronco automotive maintenance tools, dronco fastening tools, dronco cutting tools, dronco striking tools, dronco grinding tools, dronco original imports from Germany. Customers are welcome to inquire and order.