German DORMER tools, DORMER models, DORMER prices

DORMER tools are any functional tools connected to the edge (joint) of a robot. This may include robot grippers, robot tool changers, robot collision sensors, robot rotary unions, robot pressure tools, compliance devices, robot spray guns, robot deburring tools, robot arc welding torches, robot electric welding torches, etc. Robot end-effectors are generally considered peripheral equipment, accessories, robot tools, or arm-end tools (EOA). Mechanical gripping end-effectors used in industrial loading and unloading robots are mostly two-finger claw types. Classified by finger motion, they can be divided into translational and rotational types. Classified by mechanical clamping method, they can be divided into external clamping and internal expanding types. Classified by mechanical structural characteristics, they can be divided into electric (electromagnetic), hydraulic, and pneumatic types, as well as their combinations.

DORMER tool applications

Petroleum refining and petrochemical industries, coal mines, oil fields, natural gas chemical industry, explosives industry, chemical fiber industry, paint industry, fertilizer industry, various pharmaceutical industries. Oil tankers and liquefied petroleum gas vehicles, aircraft, warehouses handling flammable and explosive goods, electrolysis workshops, communication equipment assembly workshops, and places requiring non-rusting, wear-resistant, and anti-magnetic tools. Striking box wrenches, striking hex wrenches, offset handle striking box wrenches, offset handle striking hex wrenches, straight handle convex striking box wrenches, offset handle convex striking box wrenches. Striking open-end wrenches, single-head open-end wrenches, pry bar open-end wrenches, straight handle box wrenches, offset handle box wrenches, pry bar box wrenches, double-head open-end wrenches, double-head box wrenches, combination wrenches, universal wrenches, adjustable hook wrenches, hook wrenches, adjustable wrenches, C type wrenches, single-head drum wrenches, double-head drum wrenches, universal drum wrenches, F type wrenches, square head F type wrenches, non-slip F type wrenches, reinforced jaw valve wrenches. American pipe wrenches, British pipe wrenches, light-duty chain wrenches, belt wrenches, wire cutters, nut crackers, pump pliers, slip-joint pliers, locking pliers, diagonal cutting pliers, flat-nose pliers, needle-nose pliers, diagonal pliers, retaining ring pliers (internal/external). Octagonal hammers, German octagonal hammers, rust removal hammers, ball-peen hammers, mechanic's hammers, claw hammers, inspection hammers, flat-tail inspection hammers, tack pullers. Safety axes, axes, pickaxes, anvils, plumb bobs, slotted screwdrivers, Phillips screwdrivers, impact screwdrivers, clamp-handle screwdrivers, T type screwdrivers, double-ended screwdrivers, awls, hand needles, listening rods, hacksaw frames, saw blades, coping saws, pry bars, tool sets.

DORMER tool usage

1) Rip cutting method: When sawing, place the wood on a bench, step on the wood with your right foot perpendicular to the cutting line, stand straight with your left foot at an angle of 60° to the cutting line, keep your right hand perpendicular to your right knee, and position your body at an angle of approximately 45° to the cutting line. Lean forward slightly and move naturally, but do not lean left or lunge right. When sawing, hold the saw with your right hand and place your left thumb against the blade for positioning. Gently pull and push the saw a few times (pull first, then push) to start the kerf, then remove your left hand from the saw edge. When the teeth have cut into the wood about 5mm, use your left hand to help your right hand lift and push the frame saw. Lift the saw lightly, raising the sawing hand slightly; push the saw with more force, applying rhythmic force with your wrist, elbow, shoulder, and waist simultaneously. This ensures the saw blade advances along the cutting line. Otherwise, the edge of the wood after rip cutting will be curved and uneven, or the cut surface will be inconsistent top to bottom. 2) Cross-cutting method: When sawing, place the wood on a bench, stand to the left rear of the wood, hold the wood with your left hand, hold the saw with your right hand, and step on the wood with your left foot. The sawing method is the same as for rip cutting. When using a frame saw, the lower end of the blade should tilt forward. For rip sawing, the upper end of the blade tilts backward at an angle of about 75°—90° (angle with the wood surface); for cross-cutting, the blade tilts backward at an angle of about 30°—45°. Always ensure the saw blade advances along the line without deviation. The cut must be straight; avoid swaying the blade left and right, which causes skewing. When the wood is nearly severed, stabilize the cutoff piece with your left hand, slow down the sawing speed, and cut completely through. Do not leave any material to break off or snap by hand, as this can damage the saw blade and cause the wood to split along the grain, affecting quality.

DORMER tool usage

1) When placing the diamond dressing tool tip into the holder, be careful not to impact the grinding wheel surface. 2) Do not align the single-point diamond dressing tool tip vertically with the center of the grinding wheel; it generally needs to be tilted 10-15°. 3) Do not "quench" (suddenly cool) a heated dressing tool. During dry dressing, maintain sufficient interval time between dressings to allow the heated dressing tool to cool. 4) Do not assume the grinding wheel surface is ideally flat. At the start of dressing, locate the high points on the grinding wheel and perform dressing. 5) If possible, the stock removal per dressing on the grinding wheel radius should not exceed 0.001 inches. Excessive stock removal can cause premature wear and frequent fracture of the diamond dressing tool tip. 6) However, do not remove too little stock each time. Grinding wheels used on old or low-rigidity machine tools may not require dressing. 7) Note that the dressing tool should not remain in one position for too long. This will polish the grinding wheel surface, generate high temperatures, and damage the diamond dressing tool. Rotate the dressing tool at least once daily. 8) Do not continue to use worn or damaged dressing tools. Adjust or replace them promptly. 9) Do not select excessive stock removal and fast lateral feed rates during rough dressing, followed by small stock removal and slow lateral feed rates during finish dressing. This will quickly damage the diamond dressing tool. If possible, it is recommended to use the same lateral feed rate for both rough and finish dressing.

Weidou Intelligent Technology specializes in selling German DORMER workholding fixtures, DORMER hydraulic tools, DORMER power tools, DORMER pneumatic tools, DORMER hand tools, DORMER electronic tools, DORMER welding tools, DORMER piping tools, DORMER explosion-proof tools, DORMER electrical tools, DORMER automotive maintenance tools, DORMER fastening tools, DORMER cutting tools, DORMER striking tools, DORMER grinding tools. DORMER original imports from Germany. Welcome inquiries and orders from customers.