German DIAMANT BOART tools, DIAMANT BOART models, DIAMANT BOART prices

DIAMANT BOART tools utilize electromagnetic technologies such as permanent magnets to assist in mechanical manufacturing processes. They can be categorized into magnetic fixtures, magnetic tools, magnetic molds, and magnetic auxiliary devices. The use of magnetic tools can significantly improve production efficiency and reduce the labor intensity of employees. For some workpieces, clamping is inconvenient during machining and assembly due to their structural characteristics. Simply position the U-shaped iron core vertically on the worktable for processing; at this point, we only need to embed a magnet in the positioning block of the fixture to firmly adsorb the workpiece onto the worktable equipped with positioning blocks, ensuring accurate positioning. This greatly simplifies the fixture structure and improves work efficiency. Some products require welding small parts onto the workpiece; if accurate positioning is not achieved, it is not only inconvenient but also fails to meet requirements.

DIAMANT BOART tool applications and usage

The electric hydraulic oil pump can serve as the hydraulic pump for various hydraulic instruments. When paired with other hydraulic tools, the electric hydraulic oil pump enables tasks such as lifting, pressing, pipe bending, bar bending, straightening, shearing, assembly, and disassembly. It reduces labor intensity and improves work efficiency. During use, open the air release nut, turn on the switch on the oil collection block, connect the power supply, and attach the quick connector to the quick coupling of the corresponding hydraulic instrument. Press the power switch and let the motor run for 1-2 minutes. Then turn off the switch to engage the pressure boosting state. At this point, the output hydraulic oil will perform various tasks, self-pressurizing as the load increases until reaching 63MPA. After completing the work, open the switch to relieve pressure. Once the hydraulic oil has returned, remove the quick connector, tighten the air release nut, unplug the power cord, and close the switch.

DIAMANT BOART tool structure and composition

The function of power components is to convert the mechanical energy of the prime mover into fluid pressure energy. This refers to the oil pump in the hydraulic system, which provides power to the entire hydraulic system. Common structural forms of hydraulic pumps include gear pumps, vane pumps, and piston pumps. The function of actuating components (such as hydraulic cylinders and hydraulic motors) is to convert fluid pressure energy into mechanical energy, driving loads to perform linear reciprocating motion or rotary motion. Control components (i.e., various hydraulic valves) control and regulate the pressure, flow rate, and direction of the fluid in the hydraulic system. Based on different control functions, hydraulic valves can be divided into pressure control valves, flow control valves, and directional control valves. Pressure control valves are further divided into relief valves (safety valves), reducing valves, sequence valves, pressure relays, etc.; flow control valves include throttle valves, adjustment valves, flow divider/collector valves, etc.; directional control valves include check valves, pilot-operated check valves, shuttle valves, directional valves, etc. Based on different control methods, hydraulic valves can be divided into on/off control valves, fixed-value control valves, and proportional control valves. Auxiliary components include oil tanks, oil filters, oil pipes and pipe fittings, sealing rings, pressure gauges, oil level and temperature gauges, etc. Hydraulic oil is the working medium that transmits energy in hydraulic systems, including various mineral oils, emulsions, and synthetic hydraulic oils.

DIAMANT BOART tool usage

1) Carefully inspect before use. Ensure there is no external damage, switches operate flexibly without sticking, and the power cord and housing of the power tool are intact. Use a 500V megohmmeter to measure the insulation resistance between the winding and the housing; the value must not be lower than O.5 megohms. See the attached table for insulation resistance values. 2) Handheld power tools with metal housings must have a reliable protective grounding wire. The power cord should be a multi-core soft rubber-sheathed cable, with both ends of the grounding protection wire securely connected. 3) Handheld power tools should be used by dedicated personnel with appropriate professional knowledge. Strictly adhere to relevant safety operating procedures during use. 4) Before use, check whether the relevant electrical and mechanical protection devices are intact and functioning normally. Also ensure that rotating parts move flexibly without sticking. 5) When using Class I handheld power tools, users must wear prescribed protective equipment and set up qualified protective gear. Take corresponding anti-electric shock safety measures as required, such as installing residual current devices (RCDs) in the power circuit, or having the user wear insulating gloves, insulating shoes, or stand on an insulating mat. When using Class II handheld power tools in damp and confined spaces, install a leakage switch with a working current of less than 1.5mA and an action time of less than or equal to 0.1 seconds. The leakage switch should be placed inside the container and monitored by designated personnel. 6) Occupational hazards associated with the use of handheld power tools. Arm vibration disease caused by long-term hand-transmitted vibration work was listed as one of China's statutory occupational diseases as early as 1957, also known as local vibration disease, typically manifested as episodic white finger.

Weidou Intelligent Technology specializes in selling German DIAMANT BOART workpiece fixtures, DIAMANT BOART hydraulic tools, DIAMANT BOART power tools, DIAMANT BOART pneumatic tools, DIAMANT BOART manual tools, DIAMANT BOART electronic tools, DIAMANT BOART welding tools, DIAMANT BOART piping tools, DIAMANT BOART explosion-proof tools, DIAMANT BOART electrical power tools, DIAMANT BOART automotive maintenance tools, DIAMANT BOART fastening tools, DIAMANT BOART cutting tools, DIAMANT BOART striking tools, DIAMANT BOART grinding tools. DIAMANT BOART products are original imports from Germany. Welcome inquiries and orders from customers.