German CHRISTIANS tools CHRISTIANS models CHRISTIANS prices

CHRISTIANS tools utilize electromagnetic technologies such as permanent magnets to assist in mechanical manufacturing processes. They can be categorized into magnetic fixtures, magnetic tools, magnetic molds, and magnetic auxiliary equipment. The use of magnetic tools can significantly improve production efficiency and reduce the labor intensity of employees. For some workpieces, clamping is inconvenient during machining and assembly due to their structural characteristics. Simply position the U-shaped iron core vertically on the worktable for processing; at this point, we only need to embed a magnet in the positioning block of the fixture to firmly adsorb the workpiece onto the worktable equipped with the positioning block, ensuring accurate positioning. This greatly simplifies the fixture structure and improves work efficiency. Some products require welding small parts onto the workpiece; if accurate positioning is not achieved, it is not only inconvenient but also fails to meet requirements.

CHRISTIANS tool features

1) Air is easily accessible, and the operating pressure is low. Used air can be discharged locally without the need for recovery pipelines. 2) Air has low viscosity and minimal flow resistance loss, facilitating centralized air supply and long-distance transmission. 3) Pneumatic actuators have high movement speeds. 4) Pneumatic systems have strong adaptability to the environment, capable of reliable operation in wide temperature ranges, humid and dusty conditions. Minor leaks do not pollute the environment, there is no risk of fire or explosion, and usage is safe. 5) Simple structure, convenient maintenance, and low cost. 6) Long service life of pneumatic components. 7) The execution output of pneumatic components is smaller than that of hydraulic systems, with faster movement, strong adaptability, and the ability to operate in harsh environments such as flammable, explosive, dusty, humid, and impact-prone areas. They do not pollute the environment, have a long service life, simple construction, easy maintenance, and low price.

CHRISTIANS tool maintenance

1) Correct air supply system: The intake pressure at the tool inlet (not the compressor outlet pressure) is generally 90PSIG (6.2Kg/cm^2). Pressure that is too high or too low will damage the tool's performance and lifespan. The intake air must contain sufficient lubricating oil to ensure adequate lubrication of the pneumatic motor inside the tool (place a white paper at the tool exhaust to check for oil stains; the presence of oil stains is normal). The intake air must be free of moisture; using compressed air without an air dryer is inappropriate. 2) Do not arbitrarily disassemble tool parts before operation, as this affects operator safety and may cause tool damage. 3) If the tool has minor faults or fails to achieve its original function after use, do not continue using it; inspect it immediately. 4) Regularly (approximately once a week) inspect and maintain the tool, adding Grease to rotating parts such as bearings, and adding Oil to the pneumatic motor parts. 5) When using various tools, strictly adhere to all safety regulations and operating instructions. 6) Select appropriate tools for the job; tools that are too large can easily cause work injuries, while tools that are too small can easily lead to tool damage.

CHRISTIANS tool usage

1) When placing the diamond dressing tool head into the holder, be careful not to impact the grinding wheel surface. 2) Do not align the single-point diamond dressing tool head vertically with the center of the grinding wheel; generally, it needs to be tilted by 10-15°. 3) Do not "quench" (suddenly cool) a heated dressing tool. During dry dressing, maintain sufficient interval time between two dressings to allow the heated dressing tool to cool. 4) Do not assume the grinding wheel surface is ideally flat. At the start of dressing, locate the high points on the grinding wheel and proceed with dressing. 5) If possible, the amount of material removed from the grinding wheel per dressing should not exceed 0.001 inches on the radius. Excessive removal can cause premature wear and frequent breakage of the diamond dressing tool head. 6) However, do not remove too little material each time. Grinding wheels used on old or less rigid machine tools may not require dressing. 7) Note that the dressing tool should not remain in one position for too long. This will polish the grinding wheel surface, generate high temperatures, and damage the diamond dressing tool. Rotate the dressing tool at least once a day. 8) Do not continue to use worn or damaged dressing tools. Adjust or replace them promptly. 9) Do not select excessive removal amounts and fast lateral feed rates during rough dressing, followed by small removal amounts and slow lateral feed rates during fine dressing. This will quickly damage the diamond dressing tool. If possible, it is recommended to select the same lateral feed rate for both rough and fine dressing.

Weidou Intelligent Technology specializes in selling German CHRISTIANS workpiece fixtures, CHRISTIANS hydraulic tools, CHRISTIANS power tools, CHRISTIANS pneumatic tools, CHRISTIANS hand tools, CHRISTIANS electronic tools, CHRISTIANS welding tools, CHRISTIANS pipe tools, CHRISTIANS explosion-proof tools, CHRISTIANS electrical tools, CHRISTIANS automotive maintenance tools, CHRISTIANS fastening tools, CHRISTIANS cutting tools, CHRISTIANS striking tools, CHRISTIANS grinding tools, CHRISTIANS original imports from Germany. We welcome inquiries and orders from customers.