German bs systems tools, bs systems models, bs systems prices

bs systems tools are mechanized tools powered by electric motors or electromagnets, driving the working head through a transmission mechanism; these are known as power tools. They are hand-held operating tools that use low-power electric motors or electromagnets as the power source to drive the working head via a transmission mechanism. Power tools are divided into handheld and portable types. Handheld power tools are more flexible, convenient, and widely used; many varieties have become essential tools for production and daily life. There are numerous power tool brands. According to function and application, they are mainly classified into metal cutting power tools, grinding power tools, assembly power tools, and railway power tools. Common power tools include electric drills, electric grinders, electric wrenches and electric screwdrivers, electric hammers and impact drills, concrete vibrators, and electric planers.

bs systems tool classification

1) Tools: In production, magnetic properties of materials are often utilized to facilitate operations, such as magnetic screwdrivers used in electronic product assembly. In machining, large amounts of fine iron chips are generated. These chips flow back with the cooling medium into recovery containers, often causing circuit blockages and creating cleaning difficulties. A magnetic oil trough can be installed on the machine tool. During metal cutting, the cooling medium containing iron chips flows from the worktable drain groove into the oil trough. As it passes through the filter mesh, the iron chips are blocked and accumulate on one side of the mesh due to the action of ring magnets, while the cooling medium flows into the oil tank through the oil channel. For cleaning, the oil trough can be easily lifted to dump the chips. 2) Molds: When bending and forming workpieces with complex shapes, offset centers of gravity can cause instability if the mold is too small, potentially leading to cantilever effects, flipping, or warping. For example, adding a positioning magnet to the die cavity can assist in workpiece positioning, reducing mold volume while increasing positioning reliability. 3) Auxiliary tools: In stamping production, steel plates stacked together have no gaps and adhere due to atmospheric pressure, making material handling difficult. This problem can be solved by installing a magnetic auxiliary workbench close to the press. The principle involves fixing a baffle plate on the workbench, with a magnet installed on one side. The plates to be processed are placed against the other side of the baffle. During operation, vibration caused by the up-and-down movement of the press slider and the punching force causes the plates to vibrate vertically. The top plate, unable to overcome the magnetic force due to insufficient gravity, leans against the baffle, naturally forming a gap for easy material retrieval. The magnetic force can be adjusted by changing the thickness of the baffle. Magnetic force acts like an invisible hand to hold workpieces. By cleverly utilizing magnet technology, we simplify tool structures, improve workpiece process performance, and make production easier, demonstrating that magnetic tools can help achieve unexpected results.

bs systems tool usage

1) Rip cutting method: When sawing, place the wood on a bench. Step on the wood with your right foot, keeping it perpendicular to the cut line. Stand straight with your left foot at an angle of 60° to the cut line. Keep your right hand perpendicular to your right knee. Your body should be at an angle of approximately 45° to the cut line. Lean forward slightly and move freely, but do not lean left or lunge right. Hold the saw with your right hand and position your left thumb against the blade for guidance. Gently pull and push the saw a few times (pull first, then push) to start the kerf. Once the teeth have penetrated about 5mm into the wood, remove your left hand from the edge and use it to assist your right hand in lifting and pushing the frame saw. Lift the saw lightly, raising the hand slightly; push the saw with more force, applying simultaneous effort from the wrist, elbow, shoulder, and waist in a rhythmic manner. This ensures the saw blade advances along the cut line. Otherwise, the edge of the wood after rip cutting will be curved or uneven, or the cut surface will be inconsistent. 2) Cross-cutting method: When sawing, place the wood on a bench. Stand at the rear left of the wood. Hold the wood with your left hand and the saw with your right hand. Step on the wood with your left foot. The sawing motion is the same as for rip cutting. When using a frame saw, the lower end of the blade should tilt forward. For rip sawing, the upper end of the blade tilts backward at an angle of approximately 75° to 90° (relative to the wood surface). For cross-cutting, the blade tilts backward at an angle of approximately 30° to 45°. Always ensure the saw blade advances along the line without deviation. The cut must be straight; avoid swaying the blade left and right, which causes skewing. When the wood is nearly severed, stabilize the offcut with your left hand and slow down the sawing speed until the wood is completely cut through. Do not leave any material to break off naturally or snap it by hand, as this can damage the saw blade and cause the wood to split along the grain, affecting quality.

bs systems tool features

The electronically controlled powerful chuck has extremely strong holding force, reaching up to 16kg/cm², with uniform and adjustable magnetic distribution. It is suitable for various heavy-duty machining, rough machining, and finish machining operations. Ordinary powerful chucks have weaker and uneven holding force, unable to meet the requirements of heavy-duty machining. The holding force of an electronically controlled powerful chuck does not require a continuous power connection to maintain. It generates no heat during continuous operation, avoiding thermal deformation of the workpiece. Meanwhile, the strong and uniform surface holding force ensures the highest machining precision even if the workpiece extends beyond the table surface. In contrast, ordinary electromagnetic chucks require a continuous supply of current, generating heat after a period of operation. This not only causes thermal deformation of the workpiece but also reduces the magnetic force of the chuck, failing to guarantee machining precision. Electronically controlled powerful chucks can be used continuously; even with daily continuous operation for over 20 hours, no faults occur, and no maintenance is required. Ordinary permanent magnet chucks may experience a decline in holding force after about half a year of use. Electromagnetic chucks can only operate for a few hours per day, are prone to failures, and require frequent replacement and repair of internal components. Using ordinary powerful chucks requires significant workpiece adjustment time, accounting for 40%-50% of the entire machining process. Clamping and positioning are prone to obvious errors, resulting in high scrap rates and very low efficiency. Electronically controlled powerful chucks feature automatic auxiliary positioning. Simply pressing a button completes workpiece clamping or release in 0.3 seconds, significantly improving production efficiency.

Weidou Intelligent Technology specializes in selling German bs systems workholding fixtures, bs systems hydraulic tools, bs systems power tools, bs systems pneumatic tools, bs systems hand tools, bs systems electronic tools, bs systems welding tools, bs systems pipe tools, bs systems explosion-proof tools, bs systems electrical power tools, bs systems automotive maintenance tools, bs systems fastening tools, bs systems cutting tools, bs systems striking tools, bs systems grinding tools. All bs systems products are original imports from Germany. Customers are welcome to inquire and order.