German BIMA SRL tools, BIMA SRL models, BIMA SRL prices

BIMA SRL tools, also known as hand tools, are distinguished from power tools. They primarily rely on manual force to operate or apply torque. Hand tools are categorized by application into wrenches, pliers, screwdrivers, tape measures, hammers, sockets, cutting tools, scissors, tool sets, and auxiliary items such as tool trolleys, with each category having different models. Wrenches include open-end wrenches (fixed wrenches), double box-end wrenches, ratchet wrenches (quick wrenches), combination wrenches, pipe wrenches, T type socket wrenches, cross socket wrenches, and adjustable wrenches; pliers include wire cutters, needle-nose pliers, diagonal cutters, snap-ring pliers, slip-joint pliers, water pump pliers, pipe wrenches, and locking pliers; screwdrivers include slotted, Phillips, Pozidriv, hex, and Torx types; sockets are divided into standard sockets, Torx sockets (E type sockets), bit sockets (BIT sockets), spark plug sockets, and impact sockets. Common sizes are 1/4", 3/8", and 1/2", where " denotes inches; additionally, each size is available in 6-point and 12-point sockets; hammers include claw hammers, machinist hammers, ball-peen hammers, rubber mallets, and installation hammers; cutting tools include files, diamond files, tin snips, aviation snips, utility knives, square tube saws, pipe cutters, and cable cutters; materials include chrome-vanadium steel, carbon steel, and alloy steel.

BIMA SRL tool principles

The principle of hydraulics involves two cylinders of different sizes filled with water or oil. Water-filled systems are called 'water presses'; oil-filled systems are called 'oil presses'. Each cylinder contains a sliding piston. If a specific pressure is applied to the small piston, according to Pascal's law, the small piston transmits this pressure through the fluid to the large piston, lifting it. Let the cross-sectional area of the small piston be S1, and the downward force applied to the small piston be F1. Thus, the pressure exerted by the small piston on the fluid is P=F1/SI, which is transmitted unchanged in all directions through the fluid. The pressure received by the large piston must also equal P. If the cross-sectional area of the large piston is S2, the upward force F2 generated by the pressure P on the large piston is PxS2 times the cross-sectional area of the small piston. From the above equation, applying a small force to the small piston results in a large force on the large piston, which is why hydraulic presses are used for pressing plywood, oil extraction, lifting heavy loads, and forging steel.

BIMA SRL tool structure and composition

The cross-sectional shape and distribution of the magnetic core vary depending on the workpiece. Common structures of electromagnetic chucks include rectangular and circular types. Rectangular magnetic poles are arranged either longitudinally or transversely. Longitudinal arrangement of rectangular magnetic poles is suitable for securing larger workpieces; transverse arrangement is suitable for securing smaller workpieces. Circular chucks are suitable for securing ring-shaped workpieces or workpieces with complex shapes. The main characteristics of standard electromagnetic chucks are: magnetic flux lines are evenly distributed across the chuck surface, magnetic attraction cannot be concentrated, and the magnetic force per unit area is relatively low; the direction of magnetic force is perpendicular to the chuck surface and difficult to change, producing only one type of magnetic force for workpieces of the same contact area; the point of action of the magnetic force is limited to the contact surface between the workpiece and the chuck and cannot be arbitrarily changed. Therefore, machining with these chucks has disadvantages such as low positioning accuracy, insufficient clamping force, narrow application range, and low production efficiency.

BIMA SRL tool precautions

1) Before use, inspect hand tools for damage. Do not use unsafe tools. 2) Keep tools clean, especially the handles, to prevent slipping during operation. 3) Wear appropriate personal protective equipment, such as safety goggles and gloves. 4) Use hand tools with correct posture and technique; maintain a stable stance for safe operation and avoid excessive force. 5) When using sharp tools, never point the blade or sharp end toward others. 6) When not in use, cover blades or sharp parts with protective guards. Do not carry tools by hand or store them in pockets. 7) Do not misuse hand tools for unintended purposes. 8) Understand the characteristics of each hand tool and use them correctly.

Weidou Intelligent Technology specializes in selling German BIMA SRL workholding fixtures, BIMA SRL hydraulic tools, BIMA SRL power tools, BIMA SRL pneumatic tools, BIMA SRL hand tools, BIMA SRL electronic tools, BIMA SRL welding tools, BIMA SRL piping tools, BIMA SRL explosion-proof tools, BIMA SRL electrical tools, BIMA SRL automotive maintenance tools, BIMA SRL fastening tools, BIMA SRL cutting tools, BIMA SRL striking tools, BIMA SRL grinding tools, all original imports from Germany. Customers are welcome to inquire and order.