German BATTAGLINO tools BATTAGLINO models BATTAGLINO prices

BATTAGLINO tools are made of copper alloy. Due to copper's good thermal conductivity and its characteristic of being almost carbon-free, the heat generated in a short time when the tool rubs against or impacts an object is absorbed and conducted. Another reason is that copper itself is relatively soft, providing good compliance during friction and impact, making it difficult to produce tiny metal particles, so we hardly see any sparks. Therefore, explosion-proof tools are also called non-sparking tools. The materials for explosion-proof tools are beryllium bronze and aluminum bronze. Beryllium bronze alloys and aluminum bronze alloys do not spark upon impact or friction, making them very suitable for manufacturing safety tools used in explosive, flammable, strong magnetic, and corrosive environments. BeA-20C alloy withstands an impact energy of 561IJ in hydrogen containing 30% or in methane-air-oxygen mixtures containing 6.5-10%, undergoing 20 impacts without sparking or ignition.

BATTAGLINO tool classification

1) Electric planer: One of the main tools used in woodworking and renovation. It is mainly used for planing flat and straight surfaces of various woods. Products include short planers and rough planers. Rough planers are mainly used for planing flat wood surfaces and can process larger board surfaces; short planers are used for board surface planing and can be combined with various guide plates for planing tongues, borders, and grooves. The main features of using a handheld electric planer are small size, light weight, portability, and ease of use. Compared with manual tools, it can greatly reduce labor intensity and improve processing efficiency and quality. When using a handheld electric planer, hold the handle at the rear of the planer body with your right hand and slightly raise the center of gravity of the rear part. After starting the power with your left hand, hold the guide handle at the front of the planer, keeping the front center of gravity lower, and follow the operation sequence where the front of the planer contacts the wood first. When the rear center of gravity gradually and steadily contacts the planing surface, push the planer body forward smoothly in the direction of wood planing with both hands. After the planer body completes the planing stroke, lift the front of the planer with your left hand, then pick it up with both hands and return to the starting point for planing. Repeat this until all planing is completed. 2) Jigsaw: Also known as electric coping saws or electric fine saws. It is a multifunctional cutting tool that can cut wooden boards, as well as perform straight or curved cuts on plastic and metal sheets. It is particularly effective for cutting complex shapes and geometric figures with small radii of curvature. It is an essential multifunctional sawing tool for home renovation and various public interior decoration projects. It features light weight, small size, portability, simple operation, and wide application range. Its cutting principle involves a narrow saw blade with upward-facing teeth. During operation, the blade moves in a linear reciprocating motion up and down to perform cutting, completing various sawing tasks according to size requirements. If used with a guide plate, it can also perform angled bevel processing. When using an electric jigsaw, for smaller and thinner wooden boards, fix them on a workbench first and support the workpiece with your left hand, then hold the saw handle with your right hand and slowly push forward for sawing. Apply steady and uniform force during operation; do not apply excessive force to avoid injury or damage to the blade. For larger boards, ensure the board is fixed steadily, then hold the saw handle with both hands and push forward for sawing. Follow the line during sawing and always keep the blade perpendicular to the board surface to prevent jamming or deviation. 3) Circular saw: Also known as a small handheld circular saw. It is a new type of small handheld electric saw equipped with a spring-loaded automatic safety guard and an electronic control constant-speed motor. It features simple operation, flexible use, quick adjustment, and safe reliability, making it very suitable for home renovation tasks such as cutting various wooden boards and artificial fiberboards. The thickness of wood or boards to be cut is generally recommended to be below 60mm. 4) Sanding tools: Also known as small handheld grinders. They are mainly used for sanding bare wood before painting various wood veneers, and can also be used for sanding putty coatings. However, sanding putty generates significant dust, which seriously pollutes the environment, so enhanced labor protection is required during operation. Handheld grinders include belt sanders and orbital sanders. Belt sanders are mainly used for rapid sanding of wooden components and products, while orbital sanders are commonly used for sanding large areas such as wooden floors in home renovations. 5) Small engraving machine: Also known as a groove planner or trimmer. It can be used for grooving, tenoning, drilling, edge trimming, milling, and edging on various wooden products and components. It can also be used for simple edge trimming, milling, grooving, and edging on light metal materials such as aluminum alloy and plastic steel, such as aluminum alloy (or plastic steel) doors and windows, balcony frames, and furniture frames. Therefore, it is also one of the commonly used power tools in modern home renovation projects.

BATTAGLINO tool usage

1) Rip cutting method: When sawing, place the wood on a bench, step on the wood with your right foot, and position it at a right angle to the cutting line. Stand straight with your left foot at an angle of 60° to the cutting line. Keep your right hand perpendicular to your right knee. The angle between your body and the cutting line should be approximately 45°. Lean your upper body forward slightly and move naturally, but do not lean left or lunge right. When sawing, hold the saw with your right hand and place your left thumb against the blade for positioning. Gently pull and push the saw a few times with your right hand (pull first, then push) to create a kerf. Then remove your left hand from the saw edge. When the teeth have cut into the wood by about 5mm, use your left hand to assist your right hand in lifting and pushing the frame saw. Lift the saw lightly, raising the sawing hand slightly; push the saw with more force, applying simultaneous force from the wrist, elbow, shoulder, and waist in a rhythmic manner. This ensures the saw blade advances along the cutting line. Otherwise, the edge of the wood after rip cutting will be bent and uneven, or the cross-section of the cut will be inconsistent. 2) Cross-cutting method: When sawing, place the wood on a bench. Stand at the back left of the wood, hold the wood with your left hand, hold the saw with your right hand, and step on the wood with your left foot. The sawing method is the same as for rip cutting. When using a frame saw, the lower end of the blade should tilt forward. For rip sawing, the upper end of the blade tilts backward at an angle of approximately 75° to 90° (relative to the wood surface). For cross-cutting, the blade tilts backward at an angle of approximately 30° to 45°. Always ensure the saw blade advances along the line without deviation. The cut must be straight; do not allow the blade to sway left or right, causing skewness. When the wood is about to be severed, stabilize the offcut with your left hand, slow down the sawing speed, and cut completely through the wood. Do not leave any material to break off or snap by hand, as this can easily damage the saw blade and cause the wood to tear along the grain, affecting quality.

BATTAGLINO tool types and features

Hydraulic tools include: hydraulic wrenches, special electric pumps for hydraulic wrenches, hydraulic jacks, hydraulic bolt tensioners, hydraulic flange spreaders, hydraulic nut splitters, hydraulic pullers, etc. Hydraulic tools offer the advantages of high efficiency and convenience. 1) Generally use mineral oil as the working medium. The relative moving surfaces are self-lubricating, resulting in a long service life. 2) Light weight, small size, low movement inertia, and fast response speed. 3) Various hydraulic transmission components can be arranged conveniently and flexibly according to needs. 4) Automatic overload protection can be achieved. 5) Convenient operation and control, enabling a wide range of stepless speed regulation (speed regulation range up to 2000:1). 6) Linear motion is easily achieved. 7) Machine automation is easily achieved. When using electro-hydraulic combined control, not only can a higher degree of automatic control be realized, but remote control is also possible.

Weidou Intelligent Technology specializes in selling German BATTAGLINO workholding fixtures, BATTAGLINO hydraulic tools, BATTAGLINO power tools, BATTAGLINO pneumatic tools, BATTAGLINO hand tools, BATTAGLINO electronic tools, BATTAGLINO welding tools, BATTAGLINO pipe tools, BATTAGLINO explosion-proof tools, BATTAGLINO electrical tools, BATTAGLINO automotive maintenance tools, BATTAGLINO fastening tools, BATTAGLINO cutting tools, BATTAGLINO striking tools, BATTAGLINO grinding tools, BATTAGLINO original imports from Germany. Welcome inquiries and orders from customers.