German baldur tools, baldur models, baldur prices

baldur tools integrate hydraulic systems with conventional tools into a unified assembly. They convert powerful hydraulic power into mechanical motions such as reciprocating linear motion, rotary motion, and cycloidal motion. A complete hydraulic tool system consists of five components: power elements, actuating elements, control elements, auxiliary elements, and hydraulic oil. Hydraulic tools include: hydraulic wrenches, electric pumps dedicated to hydraulic wrenches, hydraulic jacks, hydraulic bolt tensioners, hydraulic flange spreaders, hydraulic nut splitters, hydraulic pullers, etc. Hydraulic tools offer the advantages of high efficiency and convenience. A complete hydraulic tool system consists of five components: power elements, actuating elements, control elements, auxiliary elements, and hydraulic oil.

baldur tool types

1) Frame saw. Also known as a buck saw, it consists of an I-shaped wooden frame, twisted rope and twist pieces, and a saw blade. The two ends of the saw blade are fixed to the frame with knobs, which can also be used to adjust the angle of the blade. After the twisted rope is tightened, the saw blade is taut and ready for use. Frame saws are classified into coarse, medium, and fine types based on blade length and tooth pitch. Coarse saw blades are 650–750mm long, with a tooth pitch of 4–5mm; coarse saws are mainly used for cutting thicker lumber. Medium saw blades are 550–650mm long, with a tooth pitch of 3–4mm; medium saws are mainly used for cutting thin lumber or cutting tenons. Fine saw blades are 450–500mm long, with a tooth pitch of 2–3mm; fine saws are mainly used for cutting finer wood and cutting tenon shoulders. 2) Handled saw. The handled saw mainly consists of two parts: the cutting edge and the handle. It can be classified into single-sided, double-sided, and backed saws. Single-sided handled saws have a blade length of 350mm, with teeth on one side. Depending on the function of the teeth, they are divided into rip cuts and crosscuts. Double-sided handled saws have a blade length of 300mm, with teeth on both sides; typically, one side is for rip cutting and the other for crosscutting. Backed saws have a blade plate length of 250–300mm. The back of the backed saw is reinforced with a steel strip to keep it straight. The teeth are finer, and they are available as rip or crosscut saws. 3) Groove saw. The groove saw consists of a handle and a saw blade, with the blade being approximately 200mm long. Groove saws are mainly used for cutting grooves in wood. 4) Panel saw. Also known as a hand saw, it consists of a handle and a saw blade. The blade is approximately 250–750mm long, with a tooth pitch of 3–4mm. Panel saws are mainly used for cutting wider boards. 5) Keyhole saw. The blade is narrow and long, with a pointed tip. The length is approximately 300–400mm. Keyhole saws are mainly used for cutting small holes and slots. 6) Compass saw. Also known as a bow saw, its construction is similar to that of a frame saw, but the blade is narrower (approximately 10mm). It is mainly used for cutting arcs and curves. 7) Wire saw. Also known as a bow saw, it is made by bending a bamboo strip into a bow shape and stretching a steel wire between the two ends. Saw-tooth-like barbs are cut into the steel wire, using the sharp edges of these barbs for cutting. The steel wire is approximately 200–600mm long, and the saw bow is 800–900mm long. Wire saws are mainly used for cutting complex curves and making openings.

baldur tool structure and composition

The cross-sectional shape and distribution of the magnetic poles vary depending on the workpiece. Common structures of electromagnetic chucks include rectangular and circular types. Rectangular magnetic poles are arranged either longitudinally or transversely. Longitudinal arrangement of rectangular magnetic poles is suitable for clamping larger workpieces; transverse arrangement is suitable for clamping smaller workpieces. Circular chucks are suitable for clamping ring-shaped workpieces or workpieces with complex shapes. The main characteristics of standard electromagnetic chucks are: magnetic flux lines are evenly distributed across the chuck surface, magnetic attraction cannot be concentrated, and the magnetic force per unit area is relatively low. The direction of the magnetic force is perpendicular to the chuck surface and difficult to change, producing only one type of magnetic force for workpieces with the same contact area. The point of application of the magnetic force on the workpiece is limited to the contact surface between the workpiece and the chuck and cannot be arbitrarily changed. Therefore, machining with these chucks has disadvantages such as low positioning accuracy, insufficient clamping force, a narrow range of applications, and lower production efficiency.

baldur tool maintenance

1) Set adjustment: The set is adjusted using a saw set. When setting, engage the slot of the saw set with the saw teeth and apply force to bend them left or right. The degree of set must meet the required specifications. 2) Filing: When filing saw teeth, clamp the saw blade in a vise so that the teeth protrude. Depending on the size of the teeth, use a triangular steel file 100–200 mm in length. File each tooth from right to left, applying uniform pressure with both hands. One face of the file should be held vertically against the lower edge of the tooth, while the other face rests against the upper edge of the adjacent tooth. If the set of the teeth is disordered, place the saw blade flat on a steel plate and use a wooden mallet to flatten all the teeth. Then, reset and refiling the teeth. Additionally, maintain the saw frame. If damage is found in the rope, nuts, knobs, or wooden joints, adjust or repair them promptly.

Weidou Intelligent Technology specializes in selling German baldur workholding fixtures, baldur hydraulic tools, baldur power tools, baldur pneumatic tools, baldur hand tools, baldur electronic tools, baldur welding tools, baldur piping tools, baldur explosion-proof tools, baldur electrical tools, baldur automotive maintenance tools, baldur fastening tools, baldur cutting tools, baldur striking tools, baldur grinding tools, baldur original imports from Germany. Customers are welcome to inquire and place orders.