German Baicchi tools Baicchi models Baicchi prices

Baicchi tools refer to electrical safety tools, which are various specialized tools and devices designed to prevent accidents such as electric shock, burns, falls, and stumbling, thereby ensuring the personal safety of workers. In power systems, to successfully complete tasks without causing personal injury, operators must carry and use various safety tools. For example, electrical safety tools are required when inspecting operating electrical equipment, changing operating modes, or performing maintenance and tests; climbing safety tools are needed during line construction; when working on live electrical equipment or in areas near live equipment, insulated safety tools must be used to prevent electric shock or arc burns. Electrical safety tools can be divided into four categories: personal protective equipment, insulated safety tools, climbing tools, and warning signs.

Baicchi tool applications and usage

The electric hydraulic oil pump can serve as the hydraulic pump for various hydraulic tools. When equipped with other hydraulic tools, the electric hydraulic oil pump can perform multiple tasks such as lifting, pressing, pipe bending, busbar bending, straightening, shearing, assembly, and disassembly. It reduces labor intensity and improves work efficiency. During use, open the air release nut, turn on the switch on the oil collection block, connect the power supply, and attach the quick connector to the quick coupling of the corresponding hydraulic tool. Press the power switch, wait for the motor to run for 1-2 minutes, then turn off the switch to set it to the pressure-boosting state. At this point, the output hydraulic oil will perform various tasks, automatically increasing pressure with the load until 63MPA. After work is completed, open the switch to relieve pressure, wait for the hydraulic oil to return, remove the quick connector, tighten the air release nut, unplug the power cord, and close the switch.

Baicchi tool structure and composition

The function of power components is to convert the mechanical energy of the prime mover into the pressure energy of the liquid. This refers to the oil pump in the hydraulic system, which provides power to the entire hydraulic system. The structural forms of hydraulic pumps generally include gear pumps, vane pumps, and piston pumps. The function of actuating components (such as hydraulic cylinders and hydraulic motors) is to convert the pressure energy of the liquid into mechanical energy, driving the load to perform linear reciprocating motion or rotary motion. Control components (i.e., various hydraulic valves) control and regulate the pressure, flow, and direction of the liquid in the hydraulic system. Depending on the control function, hydraulic valves can be divided into pressure control valves, flow control valves, and directional control valves. Pressure control valves are further divided into relief valves (safety valves), reducing valves, sequence valves, pressure relays, etc.; flow control valves include throttle valves, adjustment valves, flow divider/collector valves, etc.; directional control valves include check valves, pilot-operated check valves, shuttle valves, directional valves, etc. Depending on the control method, hydraulic valves can be divided into on/off control valves, fixed-value control valves, and proportional control valves. Auxiliary components include oil tanks, oil filters, oil pipes and pipe fittings, sealing rings, pressure gauges, oil level and oil temperature gauges, etc. Hydraulic oil is the working medium that transmits energy in the hydraulic system, including various mineral oils, emulsions, and synthetic hydraulic oils.

Baicchi tool operation

1) The single-phase power cord for mobile electric machinery and handheld electric tools must use a three-core soft rubber cable, and the three-phase power cord must use a four-core rubber cable; when wiring, the cable sheath should pass into the junction box of the equipment and be secured. 2) Before using electric tools, check the following items: the housing and handle should have no cracks or damage, the protective grounding wire or neutral wire connection should be correct and secure, the cable or flexible cord should be intact, the plug should be intact, the switch should operate normally, flexibly, and without damage, the electrical protection device should be intact, the mechanical protection device should be intact, and the rotating parts should be flexible. 3) The insulation resistance of electric tools should be measured regularly using a megohmmeter of 500V; if the insulation resistance between the live parts and the housing is less than 2M Ω, maintenance must be performed. 4) After repairing the electrical parts of electric tools, insulation resistance measurement and insulation withstand voltage tests must be conducted; the test voltage is 380V, and the test duration is 1 minutes. 5) The electrical circuits connecting electric machinery and tools should have separate switches or sockets, and residual current operated protective devices should be installed; the metal housing should be grounded; it is strictly prohibited to connect multiple devices to a single switch. 6) The rated residual operating current of current-type residual current operated protective devices must not exceed 30mA, and the operating time must not exceed 0.1 seconds; the rated residual operating voltage of voltage-type residual current operated protective devices must not exceed 36V. 7) The operating switch of electric tools should be placed within easy reach of the operator. When resting, leaving work, or in case of sudden power outage during work, the power side switch should be turned off. 8) When using portable or mobile electric tools, wear insulated gloves or stand on an insulating mat; when moving the tool, do not lift it by the power cord or the rotating parts. 9) When using Class III insulated electric tools in damp or acid-containing environments, or inside metal containers, reliable insulation measures must be taken and a dedicated supervisor must be assigned. The switch of the electric tool should be located within easy reach of the supervisor. 10) The magnetic disk surface of a magnetic base drill should be flat, clean, and rust-free; when performing side drilling or overhead drilling, measures should be taken to prevent the drill body from falling in case of power loss. 11) When using an electric wrench, ensure the reaction torque support is firmly positioned and the nut is securely tightened before starting.

Weidou Intelligent Technology specializes in selling German Baicchi workpiece clamps, Baicchi hydraulic tools, Baicchi electric tools, Baicchi pneumatic tools, Baicchi manual tools, Baicchi electronic tools, Baicchi welding tools, Baicchi piping tools, Baicchi explosion-proof tools, Baicchi electrical power tools, Baicchi automotive maintenance tools, Baicchi fastening tools, Baicchi cutting tools, Baicchi striking tools, Baicchi grinding tools, Baicchi original German imports. Welcome customers to inquire and order.