German AWUKO tools, AWUKO models, AWUKO prices

AWUKO tools utilize electromagnetic technologies such as permanent magnets to assist in mechanical manufacturing processes. They can be categorized into magnetic fixtures, magnetic tools, magnetic molds, and magnetic auxiliary equipment. The use of magnetic tools can significantly improve production efficiency and reduce the physical workload of employees. For some workpieces, clamping is inconvenient during machining and assembly due to their structural characteristics. By vertically positioning a U-shaped iron core on the workbench for processing, one only needs to embed a magnet in the locating block of the fixture to firmly hold the workpiece onto the workbench equipped with the locating block, ensuring accurate positioning. This greatly simplifies the fixture structure and improves work efficiency. Some products require welding small parts onto the workpiece; if accurate positioning is not achieved, it not only makes the work difficult but also fails to meet requirements.

AWUKO tool types

1) Frame saw. Also known as a rack saw, it consists of an I-shaped wooden frame, twisted rope, twisting pieces, and a saw blade. Both ends of the saw blade are fixed to the frame with knobs, which can also be used to adjust the angle of the blade. After tightening the twisted rope, the saw blade is taut and ready for use. Frame saws are classified into coarse, medium, and fine types based on blade length and tooth pitch. Coarse saw blades are 650—750mm long, with a tooth pitch of 4—5mm; they are mainly used for cutting thicker wood. Medium saw blades are 550—650mm long, with a tooth pitch of 3—4mm; they are mainly used for cutting thin wood or cutting tenons. Fine saw blades are 450—500mm long, with a tooth pitch of 2—3mm; they are mainly used for cutting finer wood and cutting tenon shoulders. 2) Knife saw. A knife saw mainly consists of a saw edge and a handle, and can be divided into single-sided, double-sided, and back-backed knife saws. Single-sided knife saws have a blade length of 350mm, with teeth on one side; depending on the function of the teeth, they can be divided into rip cuts and cross cuts. Double-sided knife saws have a blade length of 300mm, with teeth on both sides; typically, one side is for rip cutting and the other for cross cutting. Back-backed knife saws have a blade plate length of 250—300mm; the back of the blade is reinforced with a steel strip, and the teeth are finer, available in rip and cross cut versions. 3) Groove saw. A groove saw consists of a handle and a saw blade, with the blade being approximately 200mm long. It is mainly used for cutting grooves in wood. 4) Panel saw. Also known as a hand saw, it consists of a handle and a saw blade. The blade is approximately 250—750mm long, with a tooth pitch of 3—4mm. Panel saws are mainly used for cutting wider wooden boards. 5) Narrow hand saw. The blade is narrow and long, with a pointed front end, and a length of approximately 300—400mm. Narrow hand saws are mainly used for cutting narrow holes and slots. 6) Coping saw. Also known as a fret saw, its construction is similar to that of a frame saw, but the blade is narrower (approximately 10mm), mainly used for cutting arcs and curves. 7) Wire saw. Also known as a bow saw, it is made by bending a bamboo strip into a bow shape, with steel wire stretched between the two ends. Serrations are cut into the steel wire to form sharp edges for cutting. The steel wire is approximately 200—600mm long, and the saw bow is 800—900mm long. Wire saws are mainly used for cutting complex curves and opening holes.

AWUKO tool usage

1) Select the appropriate saw blade for the workpiece. For example, use 14 teeth per inch for cutting solid or thick soft metals; use 18 teeth per inch for tool steel, iron pipes, and hard metals; and use 24 teeth per inch for cutting metal sheets, metal pipes, and thin iron bars. 2) Push forward to cut, and lift gently when pulling back. 3) Select wrenches of appropriate size according to the nature of the work. 4) When using an adjustable wrench, apply force towards the fixed jaw, never towards the movable jaw. 5) If the wrench jaws are worn or slip during use, discontinue use immediately to prevent slipping. 6) Do not use a wrench as a hammer for striking. 5) Do not place a pipe over the handle end of a wrench to increase torque. 7) Press the inner side of the first leg of the square against the edge of the wooden board, and draw along the inner side of the second leg with a pencil to mark a perpendicular line. 8) Select the appropriate screwdriver based on the size and shape of the screw head slot. 9) Do not strike the screwdriver handle with a hammer; replace handles that are damaged immediately. 10) Do not use a screwdriver as a chisel or lever. 11) Use an electrician's screwdriver to test current; do not use ordinary screwdrivers to test high voltage. 12) Do not grind the tip of a screwdriver to avoid damaging the hardened surface. 13) Do not keep screwdrivers in shirt or trouser pockets to avoid injury from collisions or falls.

AWUKO tool types and features

Hydraulic tools include: hydraulic wrenches, special electric pumps for hydraulic wrenches, hydraulic jacks, hydraulic bolt tensioners, hydraulic flange spreaders, hydraulic nut splitters, hydraulic pullers, etc. Hydraulic tools offer the advantages of high efficiency and convenience. 1) Generally use mineral oil as the working medium; relative moving surfaces are self-lubricating, resulting in a long service life. 2) Lightweight, compact, low motion inertia, and fast response speed. 3) Various components of hydraulic transmission can be arranged conveniently and flexibly as needed. 4) Automatic overload protection can be realized. 5) Convenient operation and control, enabling stepless speed regulation over a wide range (speed regulation ratio up to 2000:1). 6) Linear motion is easily achieved. 7) Machine automation is easily realized; when adopting electro-hydraulic combined control, not only can a higher degree of automatic control be achieved, but remote control is also possible.

Weidou Intelligent Technology specializes in selling German AWUKO workpiece fixtures, AWUKO hydraulic tools, AWUKO power tools, AWUKO pneumatic tools, AWUKO hand tools, AWUKO electronic tools, AWUKO welding tools, AWUKO piping tools, AWUKO explosion-proof tools, AWUKO electrical tools, AWUKO automotive maintenance tools, AWUKO fastening tools, AWUKO cutting tools, AWUKO striking tools, AWUKO grinding tools. All AWUKO products are original imports from Germany. Customers are welcome to inquire and order.