German ATHLET tools ATHLET models ATHLET prices

ATHLET tools utilize electromagnetic technologies such as permanent magnets to assist in mechanical manufacturing processes. They can be categorized into magnetic fixtures, magnetic tools, magnetic molds, and magnetic auxiliary devices. The use of magnetic tools can significantly improve production efficiency and reduce the physical workload of employees. For some workpieces, clamping is inconvenient during machining and assembly due to their structural characteristics. Simply position the U-shaped iron core vertically on the worktable for processing. By embedding a magnet in the locating block of the fixture, the workpiece can be firmly attracted to the worktable equipped with the locating block and accurately positioned. This greatly simplifies the fixture structure and improves work efficiency. Some products require welding small parts onto the workpiece; if accurate positioning is not achieved, it not only makes the work difficult but also fails to meet requirements.

ATHLET tool classification

1) Electric planer: One of the main tools used in woodworking and renovation. It is primarily used for planing flat and straight surfaces of various types of wood. Products are available as short planers and rough planers. Rough planers are mainly used for planing flat wood surfaces and can process relatively large board surfaces. Short planers, in addition to planing board surfaces, can be used with various guide plates to plane tongues, borders, and grooves. The main features of handheld electric planers are small size, light weight, portability, and ease of use. Compared to hand tools, they significantly reduce labor intensity and improve processing efficiency and quality. When using a handheld electric planer, hold the handle at the rear of the planer body with your right hand and slightly raise the rear center of gravity. After starting the power with your left hand, hold the guide handle at the front of the planer, keeping the front center of gravity lower. Follow the sequence where the front of the planer contacts the wood first. As the rear center of gravity steadily contacts the planing surface, push the planer body forward smoothly in the direction of planing with both hands. After the planer body completes the planing stroke, lift the front of the planer with your left hand, then pick it up with both hands to return to the starting point for the next pass. Repeat until all planing is completed. 2) Jigsaw: Also known as electric saber saws or electric fine saws. It is a multifunctional cutting tool capable of straight or curved cutting on wooden boards, as well as plastic and metal sheets. It is particularly effective for cutting complex shapes and geometric figures with small radii of curvature. It is an essential multifunctional sawing tool for home renovation and various public interior decoration projects, featuring light weight, compact size, portability, simple operation, and wide application range. Its cutting principle involves a narrow saw blade with upward-facing teeth, performing vertical reciprocating linear motion to cut according to size requirements. When used with a guide plate, it can also perform angled bevel processing. When using an electric jigsaw, secure smaller, thinner wooden boards to a workbench and support the workpiece with your left hand. Hold the saw handle with your right hand and push forward slowly. Apply steady and uniform force; do not exert excessive force to avoid injury or damage to the blade. For larger boards, ensure the board is securely fixed, then hold the saw handle with both hands to push forward. Cut along the marked line, always keeping the blade perpendicular to the board surface to prevent jamming or binding. 3) Circular saw: Also known as a small handheld circular saw. It is a new type of small handheld electric saw equipped with a spring-loaded automatic safety guard and an electronically controlled constant-speed motor. It features simple operation, flexibility, quick adjustment, and safety reliability, making it suitable for cutting various wooden boards and artificial fiberboards in home renovation. The thickness of wood or boards being cut should generally be 60mm or less. 4) Sanding tools: Also known as small handheld grinders. Primarily used for sanding bare wood before painting various wood finishes, and also for sanding putty surfaces. However, sanding putty generates significant dust, which seriously pollutes the environment, so enhanced labor protection is required during operation. Handheld grinders include belt sanders and orbital sanders. Belt sanders are mainly used for rapid sanding of wooden components and products, while orbital sanders are commonly used for sanding larger areas such as wooden floors in home renovations. 5) Small engraving machine: Also known as a groove planner or trimmer. It can be used for grooving, tenoning, drilling, edging, milling, and trimming on various wooden products and components. It can also perform simple edging, milling, grooving, and trimming on light metal materials such as aluminum alloy and plastic steel, such as aluminum alloy (or plastic steel) doors and windows, balcony frames, and furniture frames. Therefore, it is also a commonly used power tool in modern home renovation projects.

ATHLET tool maintenance

1) Correct air supply system: The intake pressure at the tool inlet (not the compressor outlet pressure) is generally 90PSIG (6.2Kg/cm^2). Pressure that is too high or too low will impair tool performance and lifespan. The intake air must contain sufficient lubricating oil to ensure adequate lubrication of the pneumatic motor inside the tool (place a white paper at the tool exhaust to check for oil stains; the presence of oil stains is normal). The intake air must be free of moisture; using compressed air without an air dryer is inappropriate. 2) Do not arbitrarily disassemble tool parts before operation, as this affects operator safety and may cause tool damage. 3) If the tool has minor faults or fails to achieve its original function after use, do not continue using it; inspect it immediately. 4) Regularly (approximately once a week) inspect and maintain the tool. Add Grease to rotating parts such as bearings, and add Oil to the pneumatic motor. 5) When using various tools, strictly adhere to all safety regulations and operating instructions. 6) Select appropriate tools for the job. Tools that are too large can easily cause work injuries, while tools that are too small can easily lead to tool damage.

ATHLET tool usage

1) Carefully inspect the tool before use. Ensure there is no external damage, the switch operates flexibly without sticking, and the power cord and tool housing are intact. Use a 500V megohmmeter to measure the insulation resistance between the winding and the housing; the value must not be less than O.5 megohms. See the attached table for insulation resistance values. 2) Handheld power tools with metal housings must have a reliable protective ground wire. The power cord should be a multi-core soft rubber-sheathed cable, with the ground protection wire securely connected at both ends. 3) Handheld power tools should be used by dedicated personnel with professional knowledge. Strictly adhere to relevant safety operating procedures during use. 4) Before use, check that related electrical and mechanical protection devices are intact and functioning normally. Also ensure that rotating parts move flexibly without sticking. 5) When using Class I handheld power tools, users must wear prescribed protective equipment and set up qualified protective gear. Take corresponding anti-electric shock safety measures as required, such as installing residual current devices (RCDs) in the power circuit, or having the user wear insulating gloves, insulating shoes, or stand on an insulating mat. When using Class II handheld power tools in damp and confined spaces, install a leakage switch with a working current of less than 1.5mA and an action time of less than or equal to 0.1 seconds. The leakage switch should be placed inside the container and monitored by a dedicated person. 6) Occupational hazards of using handheld power tools. Arm vibration disease caused by long-term exposure to hand-transmitted vibration was listed as one of China's statutory occupational diseases in 1957, also known as local vibration disease, typically manifested as episodic white finger.

Weidou Intelligent Technology professionally sells German ATHLET workpiece fixtures, ATHLET hydraulic tools, ATHLET power tools, ATHLET pneumatic tools, ATHLET hand tools, ATHLET electronic tools, ATHLET welding tools, ATHLET pipe tools, ATHLET explosion-proof tools, ATHLET electrical tools, ATHLET automotive maintenance tools, ATHLET fastening tools, ATHLET cutting tools, ATHLET striking tools, ATHLET grinding tools. ATHLET original imports from Germany. Welcome inquiries and orders from customers.