German ATAS elektromotory tools ATAS elektromotory models ATAS elektromotory prices

ATAS elektromotory tools refer to implements used in woodworking. They generally have sharp cutting edges, so safety must be prioritized during use. Frequent sharpening is required, especially for planer blades and chisels, which must be kept sharp to ensure ease of use and quality, as implied by the saying "sharpening the axe does not delay the woodcutting." Woodworking tools are categorized into power tools, pneumatic tools, and hand tools. Power tools can be divided by function into multi-function tools (multi-tools) and single-function tools (such as electric planers, jigsaws, circular saws, sanders, and engravers); pneumatic tools include polishers and nail guns; hand tools can be divided into measuring tools, hand saws, woodworking planes, wood files, hand chisels, and sandpaper.

ATAS elektromotory tool classification

1) Tools: Magnetic properties of materials are often utilized in production to facilitate operations, such as magnetic screwdrivers used in electronic product assembly. In machining, a large amount of fine iron chips is generated. These chips flow back with the cooling medium into the recovery container, often causing circuit blockages and making cleaning inconvenient. A magnetic oil trough can be installed on the machine tool. During metal cutting, the cooling medium containing iron chips flows from the worktable drain into the oil trough. As it passes through the filter screen, the iron chips are blocked and accumulate on one side of the screen due to the action of ring magnets, while the cooling medium flows into the oil tank through the oil channel. For cleaning, the oil trough can be easily lifted to dump the chips. 2) Molds: When bending and forming workpieces with complex shapes, eccentricity of the center of gravity may occur. If the mold is too small, it may create a cantilever effect, causing unstable placement of the workpiece and leading to flipping or warping. For example, a positioning magnet can be added to the die cavity to assist in workpiece positioning, which reduces the mold volume and increases positioning reliability. 3) Auxiliary tools: In stamping production, steel plates stacked together have no gaps and adhere due to atmospheric pressure, making material handling very inconvenient. This problem can be solved by installing a magnetic auxiliary workbench close to the punch press. The working principle is as follows: a baffle is fixed on the workbench, with a magnet installed on one side. The sheet metal to be processed is placed against the other side of the baffle. During operation, the vertical movement of the punch press slider and vibrations caused by the punching force cause the sheets to vibrate vertically. The top sheet, unable to overcome the magnetic force due to insufficient gravity, leans against the baffle, naturally forming a gap for easy material retrieval. The magnetic force can be adjusted by changing the thickness of the baffle. Magnetic force acts like an invisible hand to hold the workpiece. By cleverly utilizing magnet technology, we simplify the structure of various tools, improve the process performance of workpieces, and make production easier, demonstrating that magnetic tools can help achieve unexpected results.

ATAS elektromotory tool structural composition

The cross-sectional shape and distribution of the pole cores vary depending on the workpiece. Common structures of electromagnetic chucks include rectangular and circular types. Rectangular magnetic poles are arranged either longitudinally or transversely. Longitudinal arrangement of rectangular magnetic poles is suitable for securing larger workpieces; transverse arrangement is suitable for securing smaller workpieces. Circular chucks are suitable for securing ring-shaped workpieces or workpieces with complex shapes. The main characteristics of standard electromagnetic chucks are: magnetic flux lines are evenly distributed on the disk surface, magnetic attraction cannot be concentrated, and the magnetic force per unit area is relatively small; the direction of magnetic force is perpendicular to the chuck surface and difficult to change, producing only one type of magnetic force for workpieces with the same contact area; the point of action of the magnetic force is limited to the contact surface between the workpiece and the chuck and cannot be arbitrarily changed. Therefore, disadvantages during machining include low positioning accuracy, low clamping force, narrow application range, and low production efficiency.

ATAS elektromotory tool usage

1) Before use, conduct a careful inspection to ensure there is no external damage, the switch operates flexibly without jamming, and the power cord and housing of the power tool are intact. Use a 500V megohmmeter to measure the insulation resistance between the winding and the housing; the value must not be lower than O.5 megohms. See the attached table for insulation resistance values. 2) Handheld power tools with metal housings must have a reliable protective grounding wire. The power cord shall be a multi-core soft rubber-sheathed cable, and the grounding protection wire at both ends must be securely connected. 3) Handheld power tools should be operated by dedicated personnel with appropriate professional knowledge. Relevant safety operating procedures must be strictly followed during use. 4) Before use, check whether the relevant electrical and mechanical protection devices are intact and functioning normally. Also ensure that rotating parts move flexibly without jamming. 5) When using Class I handheld power tools, operators must wear prescribed protective equipment and use qualified protective gear. Corresponding anti-electric shock safety measures must be taken as required, such as installing residual current devices (RCDs) in the power circuit, or having the operator wear insulating gloves, insulating shoes, or stand on an insulating mat. When using Class II handheld power tools in damp and confined spaces, a residual current circuit breaker (RCCB) must be installed. The RCCB operating current shall be less than 1.5mA, and the operating time shall be less than or equal to 0.1 seconds. The RCCB must be placed inside the container and monitored by dedicated personnel. 6) Occupational hazards associated with the use of handheld power tools. Arm vibration syndrome caused by long-term exposure to hand-transmitted vibration was listed as one of China's statutory occupational diseases in 1957, also known as local vibration disease, typically manifesting as episodic white finger.

Weidou Intelligent Technology specializes in selling German ATAS elektromotory workholding fixtures, ATAS elektromotory hydraulic tools, ATAS elektromotory power tools, ATAS elektromotory pneumatic tools, ATAS elektromotory hand tools, ATAS elektromotory electronic tools, ATAS elektromotory welding tools, ATAS elektromotory piping tools, ATAS elektromotory explosion-proof tools, ATAS elektromotory electrical power tools, ATAS elektromotory automotive maintenance tools, ATAS elektromotory fastening tools, ATAS elektromotory cutting tools, ATAS elektromotory striking tools, ATAS elektromotory grinding tools, ATAS elektromotory original German imports. Customers are welcome to inquire and place orders.