German APB tools APB models APB prices

APB tools refer to implements used in woodworking. They generally have sharp cutting edges, so safety must be prioritized during use. Frequent sharpening is required, especially for planer blades and chisels, which must be kept sharp to ensure ease of use and quality workmanship, as the saying goes, "sharpening the axe does not delay the woodcutting." Woodworking tools are categorized into power tools, pneumatic tools, and hand tools. Power tools can be divided by function into multi-function tools (multi-tools) and single-function tools (such as electric planers, jigsaws, circular saws, sanders, and engravers); pneumatic tools include polishers and nail guns; hand tools can be divided into measuring tools, hand saws, woodworking planes, wood files, hand chisels, and sandpaper.

APB tool classification

1) Screwdriver: A tool used to turn screws to position them, typically featuring a thin wedge-shaped tip that fits into the slot or recess of the screw head—also known as a "screwdriver." 2) Wrench: A hand tool with an open-end or box-end socket that uses leverage to turn bolts, screws, nuts, and other threaded fasteners. Wrenches typically have jaws at one or both ends of the handle to apply external force; applying force along the direction of thread rotation allows turning of the bolt or nut. 3) Hammer: A tool used to strike objects to move or deform them. It is most commonly used to drive nails, straighten, or break apart objects. Hammers come in various forms; a common design consists of a handle and a head. One face of the head is flat for striking, while the other may be shaped like a claw or wedge for pulling nails, or rounded. 4) Test pen: Also called a voltage tester or simply "test pen." It is an electrical tool used to test whether wires are live. The pen body contains a neon bulb; if the bulb lights up during testing, it indicates the wire is live or is the phase conductor. The tip and tail of the test pen are made of metal, while the shaft is made of insulating material. When using a test pen, one must touch the metal part at the tail end with their hand; otherwise, no circuit is formed between the live object, the test pen, the human body, and the ground, causing the neon bulb not to light up and leading to a false judgment that the object is not live. 5) Tape measure: A common measuring tool in daily life. Steel tape measures are frequently seen, widely used in construction and decoration, and are essential household tools. Types include fiber tape measures, leather tape measures, and waist tapes. Lu Ban rulers, Feng Shui rulers, and Wen Gong rulers also belong to the category of steel tape measures. 6) Utility knife: A type of knife with a sharp blade used for cutting wallpaper and similar materials, hence the name "wallpaper knife," also known as a "craft knife." It is frequently used in renovation, decoration, and signboard industries. 7) Electrician's knife: A cutting tool commonly used by electricians. Standard electrician's knives consist of a blade, cutting edge, handle, and sheath. When not in use, the blade retracts into the handle. The blade root is hinged to the handle, featuring scale lines and markings; the front end forms a screwdriver tip, both sides have file surfaces, the cutting edge has an inwardly curved blade section ending in a point, and the handle has a protection button to prevent blade rebound. The electrician's knife integrates multiple functions, allowing various wire connection operations to be completed with just one tool, eliminating the need to carry other tools, offering benefits such as simple structure, ease of use, and versatility. 8) Hacksaw: Includes hand saws (for household and woodworking use), pruning saws (for branch trimming), folding saws (for branch trimming), bow saws, veneer saws (woodworking), rip saws (woodworking), and crosscut saws (woodworking). 9) Spirit level: A spirit level contains a bubble vial and can be used to inspect, measure, and adjust whether equipment is installed level. 10) Combination pliers: Combination pliers are clamping and cutting tools consisting of a head and handles. The head includes jaws, serrated grips, cutting edges, and wire cutters. The functions of the various parts are: (1) The serrated grips can be used to tighten or loosen nuts; (2) The cutting edges can be used to strip rubber or plastic insulation from soft wires, as well as to cut wires and iron wires; (3) The wire cutters can be used to cut harder metal wires such as electrical wires and steel wires; (4) The insulating plastic sleeves on the pliers have a voltage resistance of 500V or higher, allowing live wire cutting. 11) Needle-nose pliers: Also called long-nose pliers, primarily used to cut fine single-strand and multi-strand wires, bend loops on single-strand wire connectors, and strip plastic insulation. They are also commonly used by electricians (especially indoor electricians). They consist of pointed tips, cutting edges, and handles. The handles of electrician's needle-nose pliers are covered with insulating sleeves rated for 500V. Due to their pointed tips, they are suitable for operations in narrow spaces. To bend wire connectors with needle-nose pliers: first fold the wire end to the left, then bend it clockwise to the right against the screw. 12) Wire strippers: Wire strippers are commonly used by indoor electricians, motor repair technicians, and instrument electricians; their appearance is shown below. They consist of cutting edges, crimping jaws, and handles. The handles of wire strippers are covered with insulating sleeves rated for a working voltage of 500V. Wire strippers are suitable for stripping insulation from plastic and rubber insulated wires and cable cores. Usage method: Place the wire end to be stripped into the cutting jaws, squeeze the two handles together, then release; the insulation will separate from the core wire.

APB tool maintenance

1) Correct air supply system: The intake pressure at the tool inlet (not the compressor outlet pressure) is generally 90PSIG (6.2Kg/cm^2). Pressure that is too high or too low will impair tool performance and lifespan. The intake air must contain sufficient lubricating oil to ensure adequate lubrication of the pneumatic motor inside the tool (place a white paper at the tool exhaust to check for oil stains; the presence of oil stains is normal). The intake air must be free of moisture; using compressed air without an air dryer is inappropriate. 2) Do not arbitrarily disassemble tool parts before operation, as this affects operator safety and may cause tool damage. 3) If the tool has minor faults or fails to perform its original function after use, do not continue using it; inspect it immediately. 4) Regularly (approximately once a week) inspect and maintain the tool, adding grease (Grease) to rotating parts such as bearings, and adding oil (Oil) to the pneumatic motor. 5) When using various tools, strictly adhere to all safety regulations and operating instructions. 6) Select appropriate tools for the job; tools that are too large can easily cause work injuries, while tools that are too small can easily lead to tool damage.

APB tool usage

1) Carefully inspect before use: ensure there is no external damage, switches operate flexibly without sticking, and power cords and tool housings are intact. Use a 500V megohmmeter to measure the insulation resistance between the winding and the housing; the value must not be less than O.5 megohms. See the attached table for insulation resistance values. 2) Handheld power tools with metal housings must have a reliable protective grounding wire. The power cord should be a multi-core soft rubber-sheathed cable, with the grounding wire securely connected at both ends. 3) Handheld power tools should be operated by dedicated personnel with appropriate professional knowledge. Strictly adhere to relevant safety operating procedures during use. 4) Before use, check that related electrical and mechanical protective devices are intact and functioning normally. Also ensure that rotating parts move flexibly without sticking. 5) When using Class I handheld power tools, users must wear prescribed protective equipment and set up qualified protective gear. Take corresponding anti-electric shock safety measures as required, such as installing residual current devices (RCDs) in the power circuit, or having the user wear insulating gloves, insulating shoes, or stand on an insulating mat. When using Class II handheld power tools in damp and confined spaces, install a leakage switch with a working current of less than 1.5mA and an action time of less than or equal to 0.1 seconds. The leakage switch should be placed inside the container and supervised by dedicated personnel. 6) Occupational hazards of using handheld power tools. Arm vibration disease caused by long-term exposure to hand-transmitted vibration was listed as one of China's statutory occupational diseases in 1957, also known as local vibration disease, typically manifesting as episodic white finger.

Weidou Intelligent Technology specializes in selling German APB workholding fixtures, APB hydraulic tools, APB power tools, APB pneumatic tools, APB hand tools, APB electronic tools, APB welding tools, APB piping tools, APB explosion-proof tools, APB electrical power tools, APB automotive maintenance tools, APB fastening tools, APB cutting tools, APB striking tools, APB grinding tools, APB original German imports. Welcome inquiries and orders from customers.