German AMIS SRL tools, AMIS SRL models, AMIS SRL prices

AMIS SRL tools refer to electrical safety tools and equipment, which are various specialized tools and devices designed to prevent accidents such as electric shock, burns, falls, and tumbles, thereby ensuring the personal safety of workers. In power systems, to complete tasks smoothly without personal injury, operators must carry and use various safety tools. For example, electrical safety equipment is required when inspecting operating electrical equipment, changing operating modes, or performing maintenance and tests; climbing safety equipment is needed during line construction; when working on live electrical equipment or in areas near live equipment, insulated safety tools must be used to prevent electric shock or arc burns. Electrical safety tools can be divided into four categories: personal protective equipment, insulated safety tools, climbing tools, and warning signs.

AMIS SRL tool classification

1) Metal-cutting power tools, mainly including: electric drills, magnetic base drills, electric reamers, electric knives, electric shears, electric punch shears, electric reciprocating saws, electric pipe sawing machines, electric tapping machines, electric profile cutting machines, electric miter saws, electric weld seam bevelling machines, and multifunctional power tools. 2) Sanding and grinding power tools, including: straight grinders, angle grinders, flexible shaft grinders, die grinders, orbital sanders, belt sanders, straight polishers, and disc polishers. 3) Assembly power tools, including: electric wrenches, torque-controlled electric wrenches, electric screwdrivers, electric riveters, electric self-tapping screwdrivers, and electric rivet guns. 4) Construction and road power tools, including: concrete vibrators, electric hammers, hammer drills, impact drills, electric chisels, electric floor polishers, electric stone cutters, expansion bolt wrenches, wet grinders, electric steel disc cutters, electric threading machines, electric pipe bending machines, electric engineering drills, electric scrapers, and electric brick wall milling machines.

AMIS SRL tool parameters

The main performance parameters characterizing the basic working capability of lifting tools are lifting capacity and work class. (1) Lifting capacity refers to the maximum weight of the load allowed to be lifted under specified working conditions, i.e., the rated lifting capacity. If equipped with a permanent magnet lifter (see permanent magnet lifters), the lifting capacity should also include the weight of the permanent magnet lifter. (2) Work class is a performance parameter reflecting the overall working status of lifting tools and is an important basis for designing and selecting lifting tools. It is determined by the total number of work cycles to be completed during the required service period and the load state. For lifting tools with strong regularity and high repeatability in operation procedures, such as electric hoists for loading and unloading ship cargo at docks, chain hoists for high-bay warehouses, and skip hoists for supplying blast furnaces, the work cycle is also an important parameter. The work cycle refers to the time required to complete one work cycle, which depends on the mechanism's operating speed and is related to the handling distance. The aforementioned lifting tools sometimes also use productivity as an important parameter, usually expressed as the lifting volume completed per hour. In current use, efficiency is the primary consideration, followed by appearance and quality.

AMIS SRL tool usage

1) When placing the diamond dressing tool holder into the collet, take care not to impact the grinding wheel surface. 2) Do not align the single-point diamond dressing tool vertically with the center of the grinding wheel; it generally needs to be tilted 10-15°. 3) Do not "quench" (i.e., suddenly cool) a heated dressing tool. During dry dressing, the interval between two dressings must be sufficient to allow the heated dressing tool to cool down. 4) Do not assume the grinding wheel surface is ideally flat. At the start of dressing, locate the high spots on the grinding wheel and perform dressing. 5) If possible, the stock removal per dressing on the grinding wheel radius should not exceed 0.001 inches. Excessive stock removal can cause premature wear and frequent fracture of the diamond dressing tool tip. 6) However, do not remove too little stock each time. Grinding wheels used on old or low-rigidity machine tools may not require dressing. 7) Note that the dressing tool should not remain in one position for too long during dressing. This will polish the grinding wheel surface, generate high temperatures, and damage the diamond dressing tool. Rotate the dressing tool at least once a day. 8) Do not continue to use worn or damaged dressing tools. Adjust or replace them promptly. 9) Do not select excessive stock removal and too fast a lateral feed rate during rough dressing, and then select small stock removal and slow lateral feed rate during finish dressing. This will quickly damage the diamond dressing tool. If possible, it is recommended to use the same lateral feed rate for both rough and finish dressing.

Weidou Intelligent Technology specializes in selling German AMIS SRL workholding fixtures, AMIS SRL hydraulic tools, AMIS SRL power tools, AMIS SRL pneumatic tools, AMIS SRL hand tools, AMIS SRL electronic tools, AMIS SRL welding tools, AMIS SRL piping tools, AMIS SRL explosion-proof tools, AMIS SRL electrical tools, AMIS SRL automotive maintenance tools, AMIS SRL fastening tools, AMIS SRL cutting tools, AMIS SRL striking tools, AMIS SRL grinding tools, AMIS SRL original German imports. Customers are welcome to inquire and order.