German allmatic tools allmatic models allmatic prices

allmatic tools are made of copper alloy. Due to the good thermal conductivity of copper and its characteristic of being almost carbon-free, the heat generated in a short time when the tool rubs against or impacts an object is absorbed and conducted. Another reason is that copper itself is relatively soft, providing good compliance during friction and impact, making it difficult to produce tiny metal particles, so we hardly see any sparks. Therefore, explosion-proof tools are also called non-sparking tools. The materials for explosion-proof tools are beryllium bronze and aluminum bronze. Beryllium bronze alloys and aluminum bronze alloys do not spark upon impact or friction, making them very suitable for manufacturing safety tools used in explosive, flammable, strong magnetic, and corrosive environments. BeA-20C alloy withstands an impact energy of 561IJ in hydrogen containing 30% or in methane-air-oxygen containing 6.5-10%, impacting 20 times, without sparking or ignition.

allmatic tool classification

1) Tools: Magnetic properties of materials are often utilized in production to facilitate operations, such as magnetic screwdrivers used in electronic product assembly. In machining, a large amount of fine iron chips is produced. These chips flow back into the recovery container with the cooling medium, often causing circuit blockages and creating inconvenience for cleaning. A magnetic oil trough can be installed on the machine tool. During metal cutting, the cooling medium wrapped with iron chips flows from the worktable drain groove into the oil trough. When passing through the filter screen, the iron chips are blocked and accumulated on one side of the filter screen due to the action of the ring magnet, while the cooling medium flows into the oil tank through the oil channel. For cleaning, the oil trough can be easily lifted to dump the chips. 2) Molds: When bending and forming workpieces with complex shapes, if the mold is too small due to center of gravity deviation, it may cause a cantilever effect, leading to unstable workpiece placement, flipping, or warping. For example, a positioning magnet can be added to the die cavity to assist in workpiece positioning, which reduces the mold volume and increases positioning reliability. 3) Auxiliary tools: In stamping production, steel plates stacked together have no gaps and stick together due to atmospheric pressure and other reasons, making material handling extremely inconvenient. Installing a magnetic auxiliary workbench close to the press solves this problem. The working principle is as follows: a baffle is fixed on the workbench, with a magnet installed on one side of the baffle. The plates to be processed are placed closely against the other side of the baffle. During operation, the vertical movement of the press slider and vibrations caused by the punching force cause the plates to vibrate up and down. The top plate, unable to overcome the magnetic force due to insufficient gravity, leans against the baffle, naturally forming a certain gap for easy material handling. The magnetic force can be adjusted by changing the thickness of the baffle. Magnetic force acts like an invisible hand to hold the workpiece. By cleverly using magnet technology, we simplify the structure of various tools, improve the process performance of workpieces, and make production easier. It is evident that magnetic tools can help us achieve unexpected results.

allmatic tool usage

1) Select the appropriate saw blade for the workpiece; for example, use 14 teeth per inch for cutting solid or thick soft metals; use 18 teeth per inch for tool steel, iron pipes, and hard metals; and 24 teeth per inch are suitable for cutting sheet metal, metal pipes, and thin iron bars. 2) Push the saw forward, and lift it slightly when pulling back. 3) Select a wrench of the appropriate size according to the nature of the work. 4) When using an adjustable wrench, apply force toward the fixed jaw; never apply force toward the movable jaw. 5) If the wrench jaws are worn or slip during use, discontinue use immediately to prevent slipping. 6) Do not use a wrench as a hammer for striking. 5. Do not slide a pipe over the wrench handle to increase torque. 7) Press the inner side of the first leg of the square against the edge of the wooden board, and draw along the inner side of the second leg with a pencil to mark a perpendicular line. 8) Select the appropriate screwdriver based on the size and shape of the screw head slot. 9) Do not strike the screwdriver handle with a hammer; replace handles that are damaged immediately. 10) Do not use a screwdriver as a chisel or lever. 11) Use an electrician's screwdriver to test current; do not use a standard screwdriver to test high voltage. 12) Do not grind the screwdriver tip, as this may damage the hardened surface. 13) Do not carry screwdrivers in shirt or trouser pockets to avoid injury from impacts or falls.

allmatic tool features

The electronically controlled powerful chuck has super strong holding force, up to 16kg/cm², with uniform and adjustable magnetic distribution. It is suitable for various heavy machining, rough machining, and finish machining operations. Ordinary powerful chucks have weaker and uneven holding force, unable to meet the requirements of heavy machining operations. The holding force of the electronically controlled powerful chuck does not require a continuous power supply to maintain, generating no heat during continuous operation, thus avoiding thermal deformation of the workpiece. Meanwhile, the strong and uniform surface holding force ensures the highest machining precision even if the workpiece extends beyond the table surface. In contrast, ordinary electromagnetic chucks require a continuous supply of current, generating heat after a period of operation. This not only causes thermal deformation of the workpiece but also reduces the magnetic force of the chuck, failing to guarantee machining precision. The electronically controlled powerful chuck can be used continuously; even if operated continuously for more than 20 hours per day, no faults will occur, and no maintenance is required. Ordinary permanent magnetic chucks show a decline in holding force after about half a year of use, while electromagnetic chucks can only operate for a few hours a day. Moreover, the equipment is prone to failure, requiring frequent replacement and repair of internal components. Using ordinary powerful chucks requires a significant amount of workpiece adjustment time, accounting for 40%-50% of the entire machining process. Clamping and positioning are prone to obvious errors, resulting in a high scrap rate and very low efficiency. The electronically controlled powerful chuck has an automatic auxiliary positioning function. Simply pressing a button completes the clamping or release of the workpiece in 0.3 seconds, greatly improving production efficiency.

Weidou Intelligent Technology professionally sells German allmatic workholding fixtures, allmatic hydraulic tools, allmatic power tools, allmatic pneumatic tools, allmatic hand tools, allmatic electronic tools, allmatic welding tools, allmatic piping tools, allmatic explosion-proof tools, allmatic electrical tools, allmatic automotive maintenance tools, allmatic fastening tools, allmatic cutting tools, allmatic striking tools, allmatic grinding tools, allmatic original imports from Germany. Welcome customers to inquire and order.