German AGTOS tools AGTOS models AGTOS prices

AGTOS tools are any tools connected to the robot edge (joint) with specific functions. This may include robot grippers, robot tool changers, robot collision sensors, robot rotary connectors, robot pressure tools, compliance devices, robot spray guns, robot deburring tools, robot arc welding torches, robot electric welding torches, etc. Robot end-effectors are generally considered peripheral equipment of the robot, robot accessories, robot tools, and arm-end tools (EOA). Mechanical clamping end-effectors used in loading and unloading industrial robots are mostly two-finger claw types. If classified by finger motion, they can be divided into translational and rotational types. If classified by mechanical clamping method, they can be divided into external clamping and internal expanding types. If classified by mechanical structural characteristics, they can be divided into electric (electromagnetic), hydraulic, and pneumatic types, as well as their combinations.

AGTOS tool classification

1) Electric planer: It is one of the main tools used in woodworking decoration. It is mainly used for planing flat and straight surfaces of various woods. Products are divided into short planers and rough planers. Rough planers are mainly used for planing flat and straight wood surfaces and can process relatively large board surfaces; short planers, in addition to board surface planing, can also be used with various guide plates for planing tongues, borders, and grooves. The main features of using a handheld electric planer are small size, light weight, easy to carry, and convenient to use. Compared with manual tools, it can greatly reduce labor intensity and improve processing efficiency and quality. When using a handheld electric planer, hold the handle at the rear of the planer body with your right hand and slightly raise the center of gravity of the rear part. After starting the power with your left hand, hold the guide handle at the front of the planer, keeping the center of gravity of the front part lower, and follow the operation sequence where the front part of the planer contacts the wood first. When the rear part of the planer steadily contacts the wood surface, push the planer body forward smoothly in the direction of planing with both hands. After the planer body completes the planing stroke, lift the front part of the planer with your left hand, then pick it up with both hands and return to the starting point for planing. Repeat this until all planing work is completed. 2) Jigsaw: Also known as electric coping saw, electric fine saw, etc. It is a multifunctional cutting tool that can cut wooden boards, as well as perform straight or curved cutting on plastic and metal boards. It is particularly suitable for cutting complex shapes and geometric figures with small radii of curvature. It is an essential multifunctional sawing tool for home decoration and various public interior decoration projects. It features light weight, small size, portability, simple operation, and wide application range. Its cutting principle involves a narrow saw blade with upward-facing teeth. During operation, the blade moves in a linear reciprocating motion up and down to cut, completing various sawing tasks according to size requirements. If used with a guide plate, it can also perform angled bevel processing. When using an electric jigsaw, for smaller and thinner wooden boards, fix them on a workbench first and support the workpiece with your left hand, then hold the saw handle with your right hand and push forward slowly for sawing. Apply steady and uniform force during operation; do not apply excessive force to avoid injury or damage to the blade. For larger boards, ensure the board is fixed steadily, then hold the saw handle with both hands and push forward for sawing. Operate along the line, always keeping the blade perpendicular to the board surface to prevent jamming or binding. 3) Circular saw: Also known as small handheld circular saw. It is a new type of small handheld electric saw equipped with a spring-loaded automatic safety guard and an electronically controlled constant-speed motor. It features simple operation, flexible use, quick adjustment, and high safety and reliability. It is very suitable for home decoration sawing tasks involving various wooden boards and artificial fiberboards. The thickness of wood or boards being sawed should generally be 60mm or less. 4) Sanding tools: Also known as small handheld grinders. Mainly used for sanding bare wood before painting various wood veneers, and can also be used for sanding putty coating surfaces. However, sanding putty generates significant dust, which seriously pollutes the environment, so enhanced labor protection is required during operation. Handheld grinders include belt sanders and orbital sanders. Belt sanders are mainly used for rapid sanding of wooden components and products, while orbital sanders are commonly used for sanding large areas such as wooden floors in home decoration. 5) Small engraving machine: Also known as groove planer or trimmer. It can be used for grooving, tenoning, drilling, trimming, milling, and edge trimming on various wooden products and components. It can also be used for simple trimming, milling, grooving, and edge finishing on light metal materials such as aluminum alloy and plastic steel, such as aluminum alloy (or plastic steel) doors and windows, balcony frames, and furniture frames. Therefore, it is also one of the commonly used power tools in modern home decoration projects.

AGTOS tool selection

1) Distinguish between household and professional use according to needs. Most power tools are designed for professionals. When purchasing, distinguish between professional and general household tools. The difference usually lies in power; professional tools have higher power to help professionals reduce workload. General household tools involve smaller projects and less workload, so the input power does not need to be very high. 2) The tool's outer packaging should have clear patterns, no damage, a sturdy plastic box, and durable latches. 3) The tool's appearance should have uniform color. The plastic surface should have no visible flow marks or indentations, and no scratches or impact marks. The assembly misalignment between housing parts should be ≤0.5mm. The aluminum casting coating should be smooth, aesthetically pleasing, and undamaged. The entire unit surface should be free of oil and stains. When holding by hand, the switch handle should be flat. The cable length should generally be no less than 2 meters. 4) The nameplate parameters of the tool should match those on the CCC certificate. The manual should include the detailed address and contact information of the manufacturer and production factory. The nameplate or certificate of conformity should include a traceable batch number. 5) Hold the tool by hand, connect to power, and frequently operate the switch to start the tool repeatedly. Observe whether the on/off function of the tool switch is reliable. Simultaneously observe whether there are any abnormalities in nearby TVs or fluorescent lights to confirm whether the tool is equipped with an effective radio interference suppressor. 6) Run the tool for one minute. While running, hold it by hand; you should not feel any abnormal vibration. Observe the commutation sparks; the commutation spark level should not exceed 3/2. Generally, looking inward from the air inlet, there should be no obvious arcing on the commutator surface. There should be no abnormal noise during operation.

AGTOS tool maintenance

1) Tooth setting: The set is adjusted using a tooth setter. When setting the teeth, engage the slot of the tooth setter with the saw teeth and apply force to bend them alternately to the left or right. The degree of set must meet the requirements for the kerf width. 2) Filing: When filing the saw teeth, clamp the saw blade in a vise so that the teeth protrude. Depending on the size of the teeth, use a triangular steel file 100–200 mm in length to file each tooth sequentially from right to left. Apply uniform pressure with both hands; one face of the file should be held vertically and closely against the lower cutting edge of the tooth, while the other face rests against the upper edge of the adjacent tooth. If the tooth set is found to be irregular, place the saw blade flat on a steel plate and use a wooden mallet to flatten all the teeth, then perform resetting and refiling. Additionally, maintain the saw frame; if damage is found in the ropes, nuts, knobs, or wooden mortise-and-tenon joints, adjust or repair them promptly.

Weidou Intelligent Technology professionally sells German AGTOS workholding fixtures, AGTOS hydraulic tools, AGTOS power tools, AGTOS pneumatic tools, AGTOS hand tools, AGTOS electronic tools, AGTOS welding tools, AGTOS pipe tools, AGTOS explosion-proof tools, AGTOS electrical tools, AGTOS automotive maintenance tools, AGTOS fastening tools, AGTOS cutting tools, AGTOS striking tools, AGTOS grinding tools, AGTOS original German imports. Welcome customers to inquire and order.