German wohlhaupter workpiece clamping fixtures wohlhaupter model wohlhaupter price

wohlhaupter workpiece clamping fixtures are one of the actuators for vacuum equipment. Generally, using vacuum suction cups to grip products is the most economical method. Vacuum suction cups come in various types; rubber suction cups can operate at high temperatures, silicone rubber suction cups are very suitable for gripping products with rough surfaces, and polyurethane suction cups are highly durable. Additionally, in actual production, if oil resistance is required for the suction cups, materials such as polyurethane, nitrile rubber, or vinyl-containing polymers can be considered for manufacturing. Typically, to avoid scratching the product surface, it is best to choose bellows-type suction cups made of nitrile rubber or silicone rubber. The suction cup material is made of nitrile rubber, which has high tensile strength, and is therefore widely used in various vacuum holding devices.

wohlhaupter workpiece clamping fixture requirements

Whether clamping or adsorption type, the robot's end effector must also meet the repeatability accuracy required for the operation. The structure of the robot end effector should be as simple and compact as possible, and lightweight, to reduce the load on the arm. Dedicated rather than general-purpose robot end effectors have a simpler structure, but high work efficiency, and can complete various operations. In contrast, "universal" end effectors may have disadvantages such as complex structure and high cost. Therefore, it is recommended to design and use serialized and standardized dedicated robot end effectors that can be quickly replaced. If the object has two opposing flat surfaces, a double-jaw parallel gripper can be used to solve dimensional deviation problems. For cylindrical objects, double-jaw grippers can also be used for clamping. It should be noted that retaining or encompassing clamping requires less force.

wohlhaupter workpiece clamping fixture process

The electromagnetic chuck consists of a base shell, iron core, coil, panel, and junction box. Its manufacturing process is as follows: 1) Select suitable materials for welding or casting the base shell. 2) Install the iron core on the base shell according to the type of chuck. 3) Wind the coil with the corresponding number of turns and technical parameters, dry it, and fit it onto the iron core. 4) Pour asphalt or other waterproof materials into the interior of the base shell. 5) Manufacture the panel and install it together with the base shell part. Electromagnetic chucks use DC power supply and feature stability, strong suction force, and low residual magnetism. Electromagnetic chucks can be classified into standard suction chucks and heavy-duty chucks. The suction force of standard suction chucks is 10-12 kg/cm², and that of heavy-duty electromagnetic chucks is not less than 14 kg/cm². According to usage, they can be divided into electromagnetic chucks for grinders, electromagnetic chucks for milling and planing machines, electromagnetic chucks for knife grinding machines, etc.

wohlhaupter workpiece clamping fixture maintenance

1) Check before use whether the limit dimensions are still in the correct position. 2) If the stop pin wear exceeds tolerance, it can be repaired by grinding; if the baffle, pin, or positioning taper pin wear exceeds tolerance, they can be reassembled, shifting the worn areas, and then continued to be used. 3) Apply anti-rust oil after use. Regular long-term lubrication can maintain the life of synchronous clamps; incorrect lubrication will lead to reduced clamping force, poor accuracy, wear, and jamming, so correct lubrication is essential. After machining, be sure to clean the body and slide ways of the synchronous clamp with an air gun or similar tool. When cleaning, remove the dust cover fixing screws and take off the dust cover, while opening the main jaws to the widest position, to easily clean chips accumulated inside the clamp. To avoid reduced clamping force due to rust, use anti-rust cutting oil. Remove the synchronous clamp every six months for a thorough cleaning (at least every two months when machining cast iron or copper products). Check parts for damage or wear, and replace with new ones immediately if severe. Lubricate thoroughly before assembly.

Weidou Intelligent Technology specializes in selling German wohlhaupter tooling fixtures, wohlhaupter machine tool fixtures, wohlhaupter magnetic fixtures, wohlhaupter pneumatic fixtures, wohlhaupter end effectors, wohlhaupter grippers, wohlhaupter grippers, wohlhaupter clamps, wohlhaupter electromagnetic fixtures, wohlhaupter vacuum suction cups, wohlhaupter vacuum fixtures, wohlhaupter electric fixtures, wohlhaupter hydraulic fixtures, wohlhaupter electromagnetic chucks, wohlhaupter magnetic chucks, wohlhaupter original German imports. Welcome customers to inquire and order.