German mytec workholding fixtures mytec model mytec price

mytec workholding fixtures are devices that grip objects to manipulate them. They can clamp and release objects while performing certain actions. Motion devices often mimic human movements; in the case of grippers, they mimic finger movements. The "fingers" themselves are not part of the gripper; they are specialized custom tools for gripping objects, called "jaws." Two main clamping actions: External clamping: This is the most common method for gripping objects. It is the simplest and requires the shortest stroke length. When the gripper jaws close, the clamping force applied by the gripper will hold the object. Internal clamping: In some applications, due to the geometry of the object or the need to access the exterior of the object, it is necessary to grip the object from the center. In this case, the gripper will hold the object through expansion force.

mytec workholding fixture introduction

Vacuum suction cups are one of the actuators in vacuum equipment. The suction cup material is made of nitrile rubber, which has high tensile strength, so it is widely used in various vacuum holding equipment, such as in construction, paper industry, printing, glass and other industries, to achieve the task of holding and transporting thin and light items such as glass and paper. Vacuum suction cups are also known as vacuum lifters and vacuum nozzles. Generally speaking, using vacuum suction cups to grab products is the most inexpensive method. There are various types of vacuum suction cups. Rubber suction cups can operate at high temperatures. Suction cups made of silicone rubber are very suitable for grabbing products with rough surfaces. Suction cups made of polyurethane are very durable. In addition, in actual production, if oil resistance is required for the suction cup, materials such as polyurethane, nitrile rubber or vinyl-containing polymers can be considered for manufacturing the suction cup. Usually, to avoid scratching the surface of the product, it is best to choose suction cups with bellows made of nitrile rubber or silicone rubber.

mytec workholding fixture technology

The electromagnetic chuck consists of a base housing, iron core, coil, faceplate, and junction box. The manufacturing process is as follows: 1) Select suitable materials for welding or casting the base housing. 2) Install the iron core onto the base housing according to the different types of chucks. 3) Wind the coil with the corresponding number of turns and technical parameters, dry it, and then fit it onto the iron core. 4) Pour asphalt or other waterproofing materials into the interior of the base housing. 5) Fabricate the faceplate and assemble it with the base housing. Electromagnetic chucks use DC power supply and feature stability, strong holding force, and low residual magnetism. Electromagnetic chucks can be classified into standard-holding-force chucks and high-holding-force chucks. The holding force of standard-holding-force chucks is 10-12 kg/cm², while that of high-holding-force electromagnetic chucks is not less than 14 kg/cm². According to application, they can be divided into electromagnetic chucks for grinders, electromagnetic chucks for milling machines and planers, electromagnetic chucks for knife grinding machines, etc.

mytec workholding fixture selection and usage

With the continuous development of China's industry, the use of electromagnetic chucks in industrial production is becoming more widespread. The most important aspect of an electromagnetic chuck is its parameters. Among the performance parameters of electromagnetic chucks, the lifting capacity and its working class are the most critical. The so-called lifting capacity of an electromagnetic chuck refers to the maximum weight allowed to be lifted under specified working conditions, or in other words, the rated lifting capacity. Generally, the lifting capacity of a crane equipped with an electromagnetic chuck should also include the weight of the electromagnetic chuck. Rectangular electromagnetic chucks have lifting screw holes on both sides. During installation, T-shaped screws can be screwed in for lifting. They are fixed to the workbench using T-shaped blocks and screws. Connect the DC power supply and ground wire on the machine tool, and then precision grind the upper plane of the chuck once to ensure the parallelism between the upper plane and the bottom surface. When adsorbing workpieces, as long as two adjacent magnetic poles are bridged, sufficient positioning suction force can be obtained for grinding processing. Through the machine tool buttons, magnetization and demagnetization of the workpiece can be achieved.

Weidou Intelligent Technology specializes in selling German mytec tooling fixtures, mytec machine tool fixtures, mytec magnetic fixtures, mytec pneumatic fixtures, mytec end effectors, mytec grippers, mytec grippers, mytec holders, mytec electromagnetic fixtures, mytec vacuum suction cups, mytec vacuum fixtures, mytec electric fixtures, mytec hydraulic fixtures, mytec electromagnetic chucks, mytec magnetic chucks, mytec original imports from Germany. Welcome customers to inquire and order.