German Sauter Feinmechanik workholding fixtures Sauter Feinmechanik model Sauter Feinmechanik price

Sauter Feinmechanik workholding fixture is a machine tool accessory product manufactured based on the electromagnetic principle. It generates magnetic force by energizing internal coils, tightly holding workpieces in contact with the surface of a magnetically conductive panel. Demagnetization and workpiece removal are achieved by de-energizing the coils to eliminate the magnetic force. Main applications include workpiece fixation during machining of ferrous workpieces on grinding machines, electromagnetic knife grinders, gantry milling machines, and gantry planers. Lifting screw holes are located on both sides of the rectangular electromagnetic chuck; T-shaped screws can be screwed in for lifting during installation. Secure it to the workbench using T-shaped blocks and screws, connect the DC power supply and ground wire from the machine tool, and then perform a precision grind on the upper surface of the chuck to ensure parallelism between the upper and bottom surfaces. When holding workpieces, sufficient positioning holding force for grinding operations can be obtained by bridging two adjacent magnetic poles. Magnetization and demagnetization of the workpiece can be controlled via the machine tool buttons.

Sauter Feinmechanik workholding fixture types

1) Standard rectangular electromagnetic chuck Application: Surface grinding machines with rectangular tables. 2) High-power electromagnetic chuck Application: Milling machines, planers, machining centers. 3) Fine-pole electromagnetic chuck Application: Surface grinding machines with rectangular tables, milling machines. 4) Multi-function high-power electromagnetic chuck Application: Surface grinding machines with rectangular tables. 5) Rotary electromagnetic chuck Application: Various surface grinding machines. 6) Electromagnetic chuck for knife grinding Application: Knife grinding machines. 7) Circular electromagnetic chuck (concentric pole type) Application: Surface grinding machines with rotary tables. 8) Circular electromagnetic chuck (radial pole type) Application: Surface grinding machines with rotary tables. 9) Circular electromagnetic chuck (plum blossom pole type) Application: Surface grinding machines with rotary tables. An electromagnetic chuck is an electromagnetic fixture that secures workpieces using the holding force generated by the chuck body when the electromagnetic coil is energized. The electromagnetic chuck consists of an iron core, coil, panel, and bracket. The electromagnet, formed by the coil and iron core, is the main component of the electromagnetic chuck.

Sauter Feinmechanik workholding fixture operation

1) Assemble two engine bushings into the sequence 1 strut according to the "strut welding assembly" diagram, place them on the fixture body, position the sequence 1 strut using stop pins and stop plates, and clamp the sequence 1 strut with a spiral clamp; simultaneously, position the two engine bushings of sequence 4 with pins and clamp them with quick-release spiral clamping devices; 2) After tack welding, release the quick-release spiral clamping devices, remove the pins, and take out for welding; 3) Place the welded part back on the fixture body, position it using stop pins and stop plates, and clamp it with a spiral clamp; then place the assembly of nut M6 and horn support on top of the welded part, position it using the tapered locating pin on the spiral clamping mechanism and the groove opened on the pressure plate of the spiral clamping mechanism, and clamp it with the spiral clamping mechanism; 4) Perform three-sided welding of the nut M6 and horn support assembly to the strut, then release all spiral clamps. The pressure plate of the spiral clamping mechanism clamping the nut M6 and horn support assembly is lifted by springs, causing the tapered locating pin to disengage from the welded part. Push out the pressure plate so that one end disengages from the stud of the spiral clamping mechanism, rotate the pressure plate to one side of the welded part, and then remove the welded part.

Sauter Feinmechanik workholding fixture maintenance

When using vacuum suction cups (without grippers), note that the manipulator's movement speed must not be too high; otherwise, shear forces will act on the suction cup, causing the product to easily drop during rapid twisting. In some cases, a gripper can be used to ensure safe transport of the product. Considering that the product may stick to the mold, an air gripper is usually installed to resolve this issue. If the product's surface area is too small or the product is too heavy for vacuum suction cups, the problem can also be resolved by using grippers. If strict appearance requirements apply to the product, the clamped area must not be on the outer surface. To address this, a sensor circuit can be installed. Once the gripper or suction cup has securely grasped the product, the sensor sends a signal to the manipulator to proceed with the next operation. In cases where the manipulator's motion capability is limited and manual twisting or prying is required to demold the product or move it out of the forming area, adding a special cylinder capable of independent movement without relying on manipulator operation can improve the situation.

Weidou Intelligent Technology specializes in selling German Sauter Feinmechanik jigs and fixtures, Sauter Feinmechanik machine tool fixtures, Sauter Feinmechanik magnetic fixtures, Sauter Feinmechanik pneumatic fixtures, Sauter Feinmechanik end effectors, Sauter Feinmechanik grippers, Sauter Feinmechanik grippers, Sauter Feinmechanik holders, Sauter Feinmechanik electromagnetic fixtures, Sauter Feinmechanik vacuum suction cups, Sauter Feinmechanik vacuum fixtures, Sauter Feinmechanik electric fixtures, Sauter Feinmechanik hydraulic fixtures, Sauter Feinmechanik electromagnetic chucks, Sauter Feinmechanik magnetic chucks, Sauter Feinmechanik original imports from Germany. Welcome inquiries and orders from users.