German fette workpiece fixtures fette model fette price

fette workpiece fixtures are devices used on machine tools to clamp workpieces and guide cutting tools. They refer to fixtures specifically designed for a particular operation on a specific workpiece. Their characteristics include a compact structure, rapid, convenient, and labor-saving operation, ensuring high machining accuracy and production efficiency. However, the design and manufacturing cycle is long, and manufacturing costs are high. When the product changes, the fixture becomes obsolete and is scrapped because it can no longer be used. It is only suitable for production with fixed products and large batch sizes. It contacts the positioning reference of the workpiece to determine the correct position of the workpiece in the fixture, thereby ensuring the correct relative position of the workpiece with respect to the cutting tool and the machining motion of the machine tool during processing. It typically consists of positioning elements, clamping devices, tool-setting and guiding elements or devices, etc.

fette workpiece fixture structure

The cross-sectional shape and distribution of the pole cores vary depending on the workpiece. Common structural types of electromagnetic chucks include rectangular and circular shapes. Rectangular magnetic poles are divided into longitudinal and horizontal arrangements. Longitudinal arrangement of rectangular magnetic poles is suitable for clamping larger workpieces; horizontal arrangement of rectangular magnetic poles is suitable for clamping smaller workpieces. Circular chucks are suitable for clamping ring-shaped workpieces or workpieces with complex shapes. The main characteristics of ordinary electromagnetic chucks are: magnetic flux lines are evenly distributed on the surface of the magnetic disk, electromagnetic suction force cannot be concentrated, and the magnetic force per unit area is relatively small; the direction of the magnetic force is perpendicular to the chuck surface and difficult to change, producing only one type of magnetic force for workpieces with the same contact area; the point of action of the magnetic force on the workpiece is limited to the contact surface between the workpiece and the chuck and cannot be changed arbitrarily. Therefore, there are disadvantages such as low positioning accuracy, insufficient clamping force, narrow scope of application, and low production efficiency during machining.

fette workpiece fixture features

Mechanical grippers commonly use compressed air as the power source, achieving finger movement through a transmission mechanism. Based on the different motion trajectories of the fingers when clamping the workpiece, mechanical grippers are classified into: 1) Arc opening/closing type: driven by the transmission mechanism, the motion trajectory of the finger tips is an arc. This type of gripper has strict requirements on the dimensions of the clamped part of the workpiece; otherwise, it may cause abnormal workpiece status. 2) Arc parallel opening/closing type: the two fingers of this gripper perform parallel opening and closing movements during operation, while the motion trajectory of the finger tips is an arc. The illustrated gripper shows two cases where a parallelogram transmission mechanism drives the parallel opening and closing of the fingers. 3) Linear parallel opening/closing type: the motion trajectory of the two fingers of this gripper is linear, and the clamping surfaces of the two fingers always remain parallel. A cam mechanism is used to achieve the parallel opening and closing of the two fingers. Inclined cam slots are machined on the sliding blocks of each finger. When the piston rod moves up and down, rollers mounted at its end move within the cam slots, achieving parallel clamping motion of the fingers. Using a rack-and-pinion mechanism, when the rack at the end of the piston rod drives the gear to rotate, the racks on the fingers move linearly, thereby causing the two fingers to open and close in parallel to clamp the workpiece.

fette workpiece fixture maintenance

1) Before use, check whether the limit dimensions are still in the correct position. 2) If the stop pin wear exceeds tolerance, it can be repaired by grinding; if the baffle, pin, or positioning tapered pin wear exceeds tolerance, they can be reassembled, shifting the worn areas to continue use. 3) Apply anti-rust oil after use. Regular long-term lubrication maintains the life of synchronous fixtures; incorrect lubrication will lead to reduced clamping force, poor accuracy, wear, and jamming, so correct lubrication is essential. After machining, be sure to clean the body and slide ways of the synchronous fixture using an air gun or similar tool. During cleaning, remove the dust cover fixing screws and take off the dust cover, while extending the main jaws to the fully open position to easily clean chips accumulated inside the fixture. To avoid reduced clamping force due to rust, use rust-preventive cutting oil. Remove the synchronous fixture every six months for thorough cleaning (at least every two months when machining cast iron or copper parts). Check parts for damage or wear; if severe, replace with new parts immediately. Lubricate thoroughly before assembly.

Weidou Intelligent Technology specializes in selling German fette tooling fixtures, fette machine tool fixtures, fette magnetic fixtures, fette pneumatic fixtures, fette end effectors, fette grippers, fette grippers, fette clamps, fette electromagnetic fixtures, fette vacuum suction cups, fette vacuum fixtures, fette electric fixtures, fette hydraulic fixtures, fette electromagnetic chucks, fette magnetic chucks, fette original German imports. Welcome customers to inquire and order.