German coop seals coop models coop prices

coop seals are sealing devices installed to prevent leakage between the pump shaft and the casing. Common types of shaft seals include packing seals, mechanical seals, and dynamic seals. The shaft seal of a reciprocating pump is usually a packing seal. When transporting media where leakage is not permitted, a diaphragm reciprocating pump can be used. The shaft seals of rotary pumps (including vane pumps, rotor pumps, etc.) mainly consist of packing seals, mechanical seals, and dynamic seals. The shaft seal of a reciprocating pump is usually a packing seal. When transporting media where leakage is not permitted, a diaphragm reciprocating pump can be used. The shaft seals of rotary pumps (including vane pumps, rotor pumps, etc.) mainly consist of packing seals, mechanical seals, and dynamic seals.

coop seal classification

1) Packing seal: The packing seal has a simple structure, low price, and is easy to maintain. However, it has a high leakage rate and significant power loss. Therefore, packing seals are used for transporting general media, such as water; they are generally not suitable for petroleum and chemical media, especially valuable, flammable, explosive, or toxic media. 2) Mechanical seal: Mechanical seals (also known as face seals) provide good sealing performance with very low leakage and long service life, but they are expensive and have higher requirements for machining, installation, maintenance, and repair compared to general seals. Mechanical seals are suitable for transporting petroleum and chemical media and can be used for media with various viscosities, strong corrosiveness, and containing particles. The American Petroleum Institute standard API610 (8rd edition) stipulates that cartridge mechanical seals shall be equipped unless otherwise specified by the user. 3) Dynamic seal: Dynamic seals can be divided into back-vane seals and auxiliary impeller seals. During pump operation, the centrifugal force of the back vanes (or auxiliary impeller) reduces the medium pressure at the shaft seal to atmospheric or negative pressure, preventing leakage during use. When the pump stops, the centrifugal force disappears, and the sealing effect of the back vanes (or auxiliary impeller) fails; at this time, the stationary sealing device provides the sealing function. Packing seals are commonly used in the stationary sealing devices associated with back-vane (or auxiliary impeller) seals. There are two types of packing seals: standard type and mechanically adjustable type. Standard packing seals are similar to those in general packing seal pumps, requiring a slight positive pressure at the shaft seal to avoid dry friction of the packing. Mechanically adjustable packing seals use counterweights to loosen the packing during pump operation and tighten it when stopped. Dynamic seals offer reliable performance, low price, and easy maintenance, making them suitable for transporting media with many solid particles, such as slurry pumps and feed slurry pumps in the phosphate industry. The disadvantages are greater power loss compared to mechanical seals and a shorter service life for the stationary sealing device. The seal between the rotating pump shaft and the fixed pump casing is called the shaft seal. Its function is to prevent high-pressure liquid from leaking out along the shaft or outside air from entering along the shaft. For centrifugal pumps, the shaft seal is a type of dynamic seal. Depending on whether the sealing surfaces are in contact, it can be divided into contact dynamic seals and non-contact dynamic seals. In contact dynamic seals, the sealing device contacts the shaft, resulting in relative friction between the two. Contact dynamic seals include packing seals and mechanical seals.

coop seal operation

1) If slight leakage occurs after the pump starts, observe it for a period. If the leakage does not decrease after continuous operation for 4 hours, stop the pump for inspection. 2) The operating pressure of the pump should be stable, with pressure fluctuations not exceeding 1 kg/cm². 3) During pump operation, avoid cavitation to prevent dry friction and damage to the sealing surfaces. 3) Regularly check the sealing condition. During operation, if leakage exceeds the standard (no more than 5 drops/min for heavy oil, no more than 10 drops/min for light oil), and there is no improvement within 2-3 days, stop the pump to inspect the sealing device.

coop seal failure causes

Mechanical seal failures are generally identified only after phenomena such as abnormal leakage, abnormal wear, or abnormal torque occur. The causes of failure can be broadly categorized into four aspects: 1) Incorrect design or selection of the mechanical seal; 2) Poor quality of the mechanical seal; 3) The precision of the machine using or installing the mechanical seal does not meet requirements; 4) Incorrect machine operation.

Weidou Intelligent Technology specializes in selling German coop seals, coop O-rings, coop sealing strips, coop pipe seals, coop cable seals, coop rubber seals, coop mechanical seals, coop gaskets, coop oil seals, coop shaft seals, coop metal seals, coop high-pressure seals, coop spiral seals, coop centrifugal seals, coop sealing rings, coop original imports from Germany. Welcome customers to inquire and order.