German scherer seals scherer models scherer prices

scherer seals are materials or components that prevent leakage of fluids or solid particles from between adjacent mating surfaces and prevent external contaminants such as dust and moisture from entering machinery. The recommended storage temperature for seals is below 30°C to avoid high-temperature aging. Seals can be divided into two main categories: static seals and dynamic seals. Their primary function is to prevent leakage of fluids or solid particles from between adjacent mating surfaces and to prevent external contaminants such as dust and moisture from entering machinery. Static sealing refers to the tight closure of sealed chambers and containers, used for sealing letters and testamentary stamps.

scherer seal construction

The skeleton oil seal structure consists of three parts: the seal body, the reinforcing skeleton, and the self-tightening helical spring. The seal body is further divided into sections such as the bottom, waist, cutting edge, and sealing lip. Typically, in its free state, the inner diameter of a skeleton oil seal is smaller than the shaft diameter, meaning it has a certain amount of "interference fit." Therefore, after the oil seal is installed in the seal housing and on the shaft, the pressure from the seal lip and the contraction force of the self-tightening helical spring exert a certain radial clamping force on the shaft. After a period of operation, this pressure will rapidly decrease or even disappear; thus, the spring can continuously compensate for the self-tightening force of the oil seal.

scherer seal usage guidelines

1) When the gearbox lubricating oil volume is ≤7 liters, the additive amount per liter of lubricating oil is 20‐30ml; 2) When 7‐15 liters, the additive amount is 15‐20ml per liter of lubricating oil; 3) When >15 liters, the additive amount is 10ml per liter of lubricating oil; 4) Oil seals not in immediate use should be stored properly to prevent contamination by oil, dust, or exposure to sunlight. 5) When the shaft diameter wears into a "V" shaped groove, causing the contact pressure between the new oil seal lip and the shaft to drop so that it no longer seals effectively, a displacement method can be used to compensate.

scherer seal functions and applications

Engine: Crankshaft - front and rear crankshaft oil seals; Valve - valve oil seals (engine repair kit o O-rings) (distributor oil seal, water pump oil seal, balance shaft oil seal, oil pump oil seal...); Camshaft - camshaft oil seal; Transmission: Transmission - front and rear transmission oil seals; Shift lever oil seal (transmission repair kit o O-rings) (Transfer case - front and rear transfer case oil seals); Rear Axle: Half-shaft - rear half-shaft oil seal; Differential - (front/rear) pinion oil seal; Rear wheel oil seal; Front wheel oil seal; Steering gear oil seal (steering gear repair kit o O-rings); Power steering booster oil seal (front half-shaft oil seal). Oil seals are required wherever there is liquid lubricant inside a rotating housing that connects to the exterior. Some are made of rubber, some of metal, but most are steel-reinforced rubber, such as rear crankshaft oil seals, front and rear transmission oil seals, left and right half-shaft oil seals, front main reducer oil seals, and air compressor crankshaft oil seals.

Weidou Intelligent Technology specializes in selling German scherer seals, scherer sealing rings, scherer sealing strips, scherer pipe seals, scherer cable seals, scherer rubber seals, scherer mechanical seals, scherer gaskets, scherer oil seals, scherer shaft seals, scherer metal seals, scherer high-pressure seals, scherer spiral seals, scherer centrifugal seals, scherer sealing rings, scherer original German imports. Welcome customers to inquire and order.