Germany eldisy seals eldisy model eldisy price

eldisy seals refer to devices that prevent fluid leakage, formed by at least one pair of end faces perpendicular to the axis of rotation maintaining contact and sliding relative to each other under the action of fluid pressure and the elastic force (or magnetic force) of the compensation mechanism, in conjunction with auxiliary seals. Mechanical seals where the auxiliary seal of the compensation ring is a metal bellows are called bellows mechanical seals. There are mainly the following four types of components. a. Primary sealing elements: rotating ring and stationary ring. b. Auxiliary sealing elements: O-rings. c. Clamping elements: springs, thrust rings. d. Drive elements: spring seat and key or fixing screws.

eldisy seal classification

Oil seals are generally divided into single-piece types and assembled types. The assembled type allows free combination of the cage and lip material, and is generally used for special oil seals. Based on sealing function, characteristics, structural type, operating status, and sealing mechanism, oil seals can be categorized into various forms with different names. However, conventionally, rotary shaft lip seals are referred to as oil seals, while sealing elements used for static seals and dynamic seals (generally reciprocating motion) are called seals. The representative form of an oil seal is the TC oil seal, which is a double-lip oil seal with a self-tightening spring fully encapsulated in rubber. The term oil seal commonly refers to this type of tc caged oil seal.

eldisy seal materials

Common materials for oil seals include: Nitrile rubber, Fluoroelastomer, Silicone rubber, Acrylate rubber, Polyurethane, Polytetrafluoroethylene, etc. 1) Nitrile rubber (NBR): It has good heat and wear resistance, and is resistant to various lubricating oils, greases, and oil-gas mixtures. The applicable temperature range is -30~120 degrees Celsius. However, it cannot be used in phosphate ester hydraulic fluids or gear oils containing extreme pressure additives. It performs stably in gasoline and mineral oils with low aniline points. 2) Polyacrylate rubber (ACM): Superior oil and heat resistance, wear resistance, ozone resistance, and UV radiation resistance. It is especially resistant to lubricating oils, gear oils, motor oils, engine oils, and petroleum-based hydraulic fluids containing extreme pressure agents. Suitable for operation in the -30~150 degrees Celsius range. 3) Fluoroelastomer: Resistant to aging, heat, and oil. Almost suitable for all lubricating oils, fuel oils, and gasoline. It does not harden easily in oils containing extreme pressure additives, but has poor cold resistance and high-temperature wear resistance, and significant permanent compression set. Suitable for temperatures from -20~250 degrees Celsius. 4) Silicone rubber: Has outstanding high and low temperature resistance. It can be used long-term at 150 degrees Celsius without performance change; it can be used continuously at 200 for 10000h, and maintains its unique elasticity, ozone resistance, and weather resistance within the working temperature range of -70~260. 5) Polytetrafluoroethylene: Has outstanding chemical stability, thermal stability, friction reduction, and self-lubrication. Its decomposition temperature is above 400. Therefore, it can operate normally within the temperature range of -200~300 degrees Celsius. Except for free fluorine and alkali metals, it has excellent corrosion resistance to chemicals, solvents, hydroxides, and acids. Nitrile rubber and fluoroelastomer are widely used oil seal materials. The former is low-cost, but the latter offers significant improvements in temperature resistance and sealing, though at a higher cost. It still retains some negative commonalities of ordinary rubber materials, such as poor wear resistance, short service life, and high sensitivity to shaft eccentricity, so leakage phenomena remain relatively common. PTFE oil seals are high-tech products and represent the future direction of oil seal development [2]. When selecting oil seal materials, compatibility with the working medium, adaptability to the working temperature range, and the lip's ability to follow the rotating shaft at high speeds must be considered. Generally, during operation, the lip temperature of an oil seal is 20~50℃ higher than the working medium temperature, which should be noted when selecting materials. The operating range of an oil seal depends on the material used: Nitrile rubber (NBR) is -40~120℃, Acrylate rubber (ACM) is -30~180℃, and Fluoroelastomer (FPM) is -25~300℃.

eldisy seal installation and shutdown

1) Before startup, keep the seal chamber filled with liquid. For media that solidify, use steam to heat the seal chamber to melt the medium. Manual rotation must be performed before startup to prevent sudden startup from causing the soft ring to shatter. 2) For mechanical seals utilizing an external seal oil system, start the seal oil system first. Stop the seal oil system last after shutdown. 3) After stopping a hot oil pump, do not immediately stop the cooling water for the seal oil chamber and face seal. Wait until the oil temperature at the face seal drops below 80 degrees before stopping the cooling water to avoid damaging the seal parts.

Weidou Intelligent Technology specializes in selling German eldisy seals, eldisy O-rings, eldisy sealing strips, eldisy pipe seals, eldisy cable seals, eldisy rubber seals, eldisy mechanical seals, eldisy gaskets, eldisy oil seals, eldisy shaft seals, eldisy metal seals, eldisy high-pressure seals, eldisy spiral seals, eldisy centrifugal seals, eldisy sealing rings, eldisy original German imports. Welcome inquiries and orders from users.