German bt seals seals bt seals models bt seals prices

bt seals seals are sealing devices installed to prevent leakage between the pump shaft and the housing. Common types of shaft seals include packing seals, mechanical seals, and hydrodynamic seals. The shaft seal of a reciprocating pump is usually a packing seal. When transporting media where leakage is not permitted, a diaphragm reciprocating pump can be used. The shaft seals of rotary pumps (including vane pumps, rotor pumps, etc.) mainly include packing seals, mechanical seals, and hydrodynamic seals. The shaft seal of a reciprocating pump is usually a packing seal. When transporting media where leakage is not permitted, a diaphragm reciprocating pump can be used. The shaft seals of rotary pumps (including vane pumps, rotor pumps, etc.) mainly include packing seals, mechanical seals, and hydrodynamic seals.

bt seals seal principle

Since there is an oil film controlled by the oil seal lip edge between the oil seal and the shaft, this oil film has fluid lubrication characteristics. Under the action of liquid surface tension, the stiffness of the oil film causes the end in contact with air to form a meniscus, preventing the leakage of the working medium and thereby achieving sealing of the rotating shaft. The sealing capability of an oil seal depends on the thickness of the oil film on the sealing surface; if the thickness is too great, the oil seal will leak; if the thickness is too small, dry friction may occur, causing wear on the oil seal and shaft; if there is no oil film between the sealing lip and the shaft, it is easy to cause heating and wear. Therefore, during installation, some oil must be applied to the sealing ring, and it must be ensured that the skeleton oil seal is perpendicular to the shaft centerline. If it is not perpendicular, the sealing lip of the oil seal will wipe the lubricating oil off the shaft, which will also lead to excessive wear of the sealing lip. During operation, it is ideal for a slight amount of lubricant in the housing to seep out to achieve the state of forming an oil film at the sealing surface.

bt seals seal applications

Skeleton oil seals are widely used in industries such as aviation, automotive, motorcycles, railways, vehicles, ships, home appliances, and construction machinery. They are suitable for sealing rotating and reciprocating motions. They are installed on various heavy-duty engines, gearboxes, axles, ships, cylinders, and other components. They mainly prevent the permeation of sealed media (gas, liquid) and the entry of external foreign matter into the body. Precautions: The pressure-bearing range of ordinary oil seals is very limited, generally 0.03 MPa. This pressure is generally formed by the height difference of the lubricating oil itself. If higher pressure needs to be sealed, high-pressure oil seals (generally capable of withstanding up to 1 MPa pressure) or other sealing forms should be selected.

bt seals seal specifications and uses

1) Ordinary single-lip type: Generally used for sealing mineral oil, water, and other media in high- and low-speed rotating shafts and reciprocating motions. Ordinary oil seals are used in environments with less dust and impurities, resistant to medium pressure<0.05MPa occasions, maximum linear speed 15m/s, reciprocating motion speed<0.1m/s. 2) Ordinary double-lip type: In addition to the usage characteristics of the above-mentioned S type oil seals, they can also provide dust protection. Ordinary oil seals with dust lips can prevent dust, resistant to medium pressure<0.05MPa occasions, linear speed ≤15m/s. 3) Springless type: Single-lip inner-skeleton rubber oil seal without a spring. Generally suitable for low-speed conditions where the sealing medium is lubricating grease. Linear speed ≤6m/s. 4) Outer-skeleton single-lip type: Single-lip outer-exposed skeleton rubber oil seal with a spring, featuring a thin waist, good followability, and good rigidity. Ordinary oil seals are used in environments with less dust and impurities, resistant to medium pressure<0.05MPa occasions. Cases where the rotational axis linear speed is ≤15m/s. 5) Outer-skeleton double-lip type: Double-lip outer-exposed skeleton rubber oil seal with a secondary lip, featuring a thin waist, good followability, high rigidity, and good concentricity. Ordinary oil seals with dust lips can prevent dust, resistant to medium pressure<0.05MPa occasions. Rotational speed ≤15m/s. 6) Assembled single-lip type: Outer-skeleton oil seal formed by assembling inner and outer skeletons with rolled edges, featuring high installation precision, fast heat dissipation, and heavy-load characteristics. Suitable for heavy-load conditions under high temperature and high speed, medium pressure ≤0.05MPa, maximum linear speed ≤15m/s. 7) Unidirectional return flow type right-hand rotation, left-hand rotation: Angled diagonal ribs are manufactured on the air side of the lip, utilizing hydrodynamic principles to generate a unidirectional pumping action with a return flow effect. Related to the rotation direction of the shaft, due to the return flow effect, the radial force is smaller than that of ordinary oil seals, reducing wear and heat generation, and extending service life. Suitable for medium pressure<0.05MPa occasions, rotational speed ≤20m/s. 8) Pressure-resistant type: Short lip, short and thick waist, providing pressure resistance, working pressure ≤3MPa. Suitable for occasions with medium pressure ≤3MPa, suitable for shaft end oil seals of high-pressure pumps, generally PV value ≤8. Rotational axis linear speed ≤15m/s.

Weidou Intelligent Technology professionally sells German bt seals seals, bt seals sealing rings, bt seals sealing strips, bt seals pipe seals, bt seals cable seals, bt seals rubber seals, bt seals mechanical seals, bt seals sealing gaskets, bt seals oil seals, bt seals shaft seals, bt seals metal seals, bt seals high-pressure seals, bt seals spiral seals, bt seals centrifugal seals, bt seals sealing rings, bt seals original German imports. Welcome customers to inquire and order.