German RSBW70 571070S RS coupling RSBW70 571070S RS model RSBW70 571070S RS price

RSBW70 571070S RS coupling is a component that connects the prime mover to the driven machine. Its main function is overload protection. The torque limiter limits the torque transmitted by the drive system by slipping when the required torque exceeds the set value due to overload or mechanical failure. It automatically re-engages once the overload condition disappears. This prevents mechanical damage and avoids costly downtime losses.

RSBW70 571070S RS coupling structure and applications

Universal couplings have various structural types, such as cross-axis type, ball-cage type, ball-fork type, cam type, ball-pin type, ball-joint type, ball-joint plunger type, three-pin type, triple-yoke type, triple-ball-pin type, and hinged-yoke type; the most common is the cross-axis type, followed by the ball-cage type. In practical applications, they are classified into heavy-duty, medium-duty, light-duty, and small-size types based on the magnitude of the transmitted torque. They are mechanical parts used to connect two shafts (drive shaft and driven shaft) in different mechanisms so that they rotate together to transmit torque. In high-speed, heavy-load power transmission, some couplings also provide buffering, vibration damping, and improved dynamic performance of the shaft system. A coupling consists of two halves, each connected to the drive shaft and the driven shaft respectively. Generally, prime movers are connected to driven machines via couplings.

RSBW70 571070S RS coupling alignment process

Alignment of universal couplings is one of the important tasks in machine installation. The purpose of alignment is to ensure that the centerlines of the drive shaft and the driven shaft are collinear during machine operation. Alignment accuracy affects whether the machine can operate normally, which is especially critical for high-speed machinery. Achieving absolutely accurate alignment of the two shafts of a cross-type universal coupling is difficult, and maintaining accurate alignment for continuously operating machinery is even more challenging. Uneven thermal expansion of components, shaft deflection, uneven bearing wear, machine displacement, and uneven foundation settlement are all reasons why it is difficult to maintain shaft alignment. Therefore, an allowable deviation between the two shaft centers is specified during machine design, which is also required during coupling installation. From an assembly perspective, as long as the coupling can transmit torque safely and reliably, the larger the allowable deviation between the shaft centers, the easier it is to meet the requirements during installation. However, from an installation quality perspective, the smaller the deviation between the shaft centerlines, the more precise the alignment, the better the machine operation, and the longer the service life. Therefore, the allowable deviation for shaft alignment during universal coupling installation should not be regarded as slack left by careless installers.

RSBW70 571070S RS coupling measurement sequence

Misalignment of universal couplings may involve radial displacement, angular misalignment, or both. Concentricity measurement should be performed at four evenly distributed positions on the end face and circumference of the universal coupling. For pump units connected by cross-axis universal couplings, concentricity adjustment is inevitable during installation to ensure the coupling halves are both concentric and parallel; otherwise, it will affect pump efficiency or cause equipment failure. For some large high-temperature equipment, factors such as base height increase due to thermal linear expansion should also be considered during coupling alignment. Measurement can be performed in the following order: 1) Temporarily connect half-universal coupling A and B, and set up special tools. 2) Rotate half-couplings A and B simultaneously so that the special tool or alignment mark rotates sequentially through the four positions. At each position, measure the radial values (or gaps) and axial values of the two half-couplings. Install BJ. If the universal coupling is found to be misaligned or non-parallel, adjustment is required. During adjustment, first adjust the horizontal level of the pump unit, then use the universal coupling of the pump unit as the reference to measure and adjust the motor coupling half to ensure the motor and pump unit are coaxial and concentric. When adjusting coupling concentricity, adjust the face gap first, then the shaft gap. When adjusting the motor, shims of different thicknesses can be used under the motor base according to d and mouth values. First adjust the axial gap to make the two halves parallel, then adjust the radial gap to make them concentric. If the equipment manufacturer has no specific requirements, for shaft speed 2980rmin, the shaft gap (concentricity) and face gap (parallelism) errors of general universal couplings should not exceed 0.03mm; for shaft speed 1500rmin, the shaft gap and face gap errors of the universal coupling should not exceed 0.05mm. During coupling alignment, the principle of similar triangles can be used to account for the influence of shaft gap adjustment on face gap, allowing for calculation-based alignment, which can greatly improve the speed of universal coupling alignment.

Weidou Intelligent Technology professionally sells German RSBW70 571070S RS rigid couplings, RSBW70 571070S RS flexible couplings, RSBW70 571070S RS safety couplings, RSBW70 571070S RS universal couplings, RSBW70 571070S RS diaphragm couplings, RSBW70 571070S RS jaw couplings, RSBW70 571070S RS flange couplings, RSBW70 571070S RS cross couplings, RSBW70 571070S RS slider couplings, RSBW70 571070S RS gear couplings, RSBW70 571070S RS tire couplings, RSBW70 571070S RS elastic couplings, RSBW70 571070S RS bellows couplings, RSBW70 571070S RS roller chain couplings, RSBW70 571070S RS spring couplings, RSBW70 571070S RS original German imports. Welcome customers to inquire and order.