German Fey Lamellenring coupling, Fey Lamellenring model, Fey Lamellenring price

Fey Lamellenring coupling slider is ring-shaped, made of steel or wear-resistant alloy. Oldham couplings are suitable for transmissions with lower speeds and higher torque transmission. Slider couplings consist of two shaft hubs and a center slider. The center slider, as a torque-transmitting element, is usually made of engineering plastic; in special cases, other materials such as metal can be selected.

Fey Lamellenring coupling introduction

Consists of two hubs and a thin-walled metal tube, connected by welding or bonding. Although many other materials are available, stainless steel and nickel are the most commonly used metal tube materials. Nickel tubes are produced by electrodepositing. This method first involves machining a solid mandrel into a corrugated shape, electroplating nickel onto the mandrel, and then chemically dissolving the mandrel to obtain a nickel bellows. This method controls the precision of the bellows wall thickness and achieves thinner walls than other methods. These thin-walled bellows give the coupling high sensitivity and rapid response, making it ideal for applications in extremely small and precise instruments.

Fey Lamellenring coupling features and applications

1) Bellows couplings are backlash-free and highly sensitive. 2) High elasticity provides better equipment protection. 3) Capable of absorbing vibration and compensating for radial, angular, and axial misalignments. 4) Resistant to oil contamination and corrosion. 5) Torsionally rigid, with identical clockwise and counterclockwise rotation characteristics. 6) Commonly used in CNC machine tools, indexing tables, and other industrial machinery. The elastic element of bellows couplings is a precision metal bellows, available in flexible and rigid series. The flexible series has greater elasticity and is often used in micro applications such as encoders and sensors, while the rigid series is mainly applied in servo motors and CNC machine tools (machining centers).

Fey Lamellenring coupling troubleshooting

Based on the coupling structure, power is transmitted from the coupling to the power output shaft (gearbox shaft) via a clamping hub, and to the power input shaft via a clamp collar. Power is transmitted between the clamp end and the clamping hub of the coupling through the bellows, which are bonded to the clamping hub and clamp collar. The fault location is at the clamp collar and bellows. Two pre-deformation slots are machined radially into the clamp collar, with a slot width of approximately 2mm. The slot on the side with the clamping screw is a through-slot in the diameter direction but does not penetrate completely at the depth where it connects to the bellows, featuring a beveled cross-section. The other slot does not open radially through, but its longitudinal connection to the bellows also does not penetrate completely, featuring a beveled cross-section. During clamping, the clamping screws are tightened to the specified value using a torque wrench, eliminating the clearance between the bore and shaft through the deformation of the clamp collar to achieve clamping. As seen from the cross-sectional view, due to the presence of the two pre-deformation slots, the cross-section at this location is weaker, and deformation primarily occurs at these slots. The pre-deformation slot on the side with the clamping screw has the smallest cross-sectional area and is the weakest point. Permanent figure-eight deformation marks at its end indicate that the stress in this area during clamping is significant, exceeding the yield limit of super-hard aluminum. According to the stress distribution diagram, once the bevel gear box and main gearbox are assembled and clamped, the stress value at the bonded surface of the pre-deformation slot on the clamping screw side is 164Mpa, with a deformation magnitude of 0.027mm. During launcher operation, the coupling is subjected to alternating composite stresses, causing even greater stress and deformation at this location. If minor defects such as voids, inclusions, or flaws exist at the bonded surface during manufacturing, micro-cracks will first form at the defective areas within the region of highest stress on the coupling's bonded surface when the alternating stress exceeds the bond strength, creating a fatigue source. Due to stress concentration at the crack tip, the crack gradually expands with increasing stress cycles and prolonged exposure to constant stress. As the crack propagates, the bonded surface is progressively weakened, leading to fatigue failure when the crack reaches a certain size. The coupling functioned normally during initial tests, but as usage time increased, cracks gradually propagated, causing failure even under low loads. The presence of stress at the bonded joint is a potential hazard for failure. To avoid high stress generation in the clamp collar during clamping, annular grooves are generally cut into the clamp collar for stress relief.

Weidou Intelligent Technology specializes in selling German Fey Lamellenring rigid couplings, Fey Lamellenring flexible couplings, Fey Lamellenring safety couplings, Fey Lamellenring universal joints, Fey Lamellenring diaphragm couplings, Fey Lamellenring jaw couplings, Fey Lamellenring flange couplings, Fey Lamellenring Oldham couplings, Fey Lamellenring slider couplings, Fey Lamellenring gear couplings, Fey Lamellenring tire couplings, Fey Lamellenring elastic couplings, Fey Lamellenring bellows couplings, Fey Lamellenring roller chain couplings, Fey Lamellenring spring couplings. Fey Lamellenring products are original imports from Germany. Customers are welcome to inquire and order.