German TORRINGTON bearings TORRINGTON models TORRINGTON prices

TORRINGTON bearings have raceways on both the inner and outer rings, and the inner and outer rings can move relative to each other along the bearing axis. This type of bearing is particularly suitable for withstanding combined loads, i.e., loads acting radially and axially at the same time. The axial load carrying capacity of angular contact ball bearings increases as the contact angle α increases. The contact angle is the angle between the line connecting the contact points of the ball and the raceway in the radial plane and the perpendicular to the bearing axis.

TORRINGTON bearing applications

Single-row angular contact ball bearings: machine tool spindles, high-frequency motors, gas turbines, centrifugal separators, front wheels of small cars, differential pinion shafts, booster pumps, drilling platforms, food machinery, indexing heads, repair welding machines, low-noise cooling towers, electromechanical equipment, painting equipment, machine tool slot plates, arc welding machines Double-row angular contact ball bearings: oil pumps, Roots blowers, air compressors, various transmissions, fuel injection pumps, printing machinery, planetary gearboxes, extraction equipment, cycloid reducers, food packaging machinery, electric welding machines, soldering irons, square boxes, gravity spray guns, wire stripping machines, half shafts, inspection and analysis equipment, fine chemical machinery.

TORRINGTON bearing lubrication

The purpose of rolling bearing lubrication is to reduce internal friction and wear, prevent seizure; extend service life; dissipate frictional heat, cool, prevent overheating of the bearing, prevent aging of the lubricating oil itself; it also prevents foreign matter from entering the bearing interior, or prevents rust and corrosion. Bearing lubrication methods are divided into grease lubrication and oil lubrication. In order for the bearing to perform well, first, choose a lubrication method suitable for the operating conditions and purpose. If only considering lubrication, oil lubrication has superior lubricity. However, grease lubrication has the advantage of simplifying the structure around the bearing. Compare the pros and cons of grease lubrication and oil lubrication. Pay special attention to the amount during lubrication. Whether using oil or grease, too little leads to insufficient lubrication affecting bearing life, while too much creates significant resistance, affecting rotational speed.

TORRINGTON bearing maintenance

1) When the bearing has operated for a certain period (or during the maintenance interval), remove all bearings; 2) Soak and clean the bearings with diesel or kerosene used for cleaning; if technical conditions allow, best to open the seal cover for cleaning; 3) After cleaning, let the cleaning oil dry naturally, visually inspect for any damage; 4) Use a wooden stick (preferably a hollow tube) about 150mm long, with a diameter equal to the inner diameter of the angular contact ball bearing, fix one end with a bearing; 5) While quickly rotating the bearing by hand, press the other end of the wooden stick (tube) against your ear or an audio amplifier microphone to listen for bearing rotation noise; 6) After fixing the bearing, laterally wiggle the wooden stick to check for bearing wear or looseness; 7) Bearings with severe looseness, excessive rotation noise, or serious defects in FAG bearings should be discarded and replaced with the same model; 8) Take a bucket and melt an appropriate amount of lubricating grease (high-quality yellow dry oil) over a gentle flame (do not overheat), immerse the inspected bearings in the bucket until no bubbles emerge. Remove the bearing before the grease cools for minimal residual grease. Remove the angular contact ball bearing after the grease cools for more residual grease. Determine the amount of residual grease as needed. 9) Wipe off the external grease from the bearing with a soft cloth or toilet paper, install the FAG bearing back onto the pulley in its original state, completing the maintenance work.

Weidou Intelligent Technology specializes in selling German TORRINGTON plain bearings, TORRINGTON rolling bearings, TORRINGTON spherical plain bearings, TORRINGTON deep groove ball bearings, TORRINGTON angular contact ball bearings, TORRINGTON self-aligning ball bearings, TORRINGTON thrust ball bearings, TORRINGTON double-direction thrust angular contact ball bearings, TORRINGTON combination bearings, TORRINGTON thrust roller bearings, TORRINGTON needle roller bearings, TORRINGTON outer sphere ball bearings, TORRINGTON self-aligning roller bearings, TORRINGTON flanged bearings, TORRINGTON linear bearings, TORRINGTON imported originally from Germany, welcome customers to inquire and order.