German WERNER sensors WERNER models WERNER prices

WERNER sensors are used to measure the robot's own position. Position sensors can be divided into two types: contact sensors and proximity sensors. Sensors that can sense the position of the measured object and convert it into a usable output signal. It can sense the position of the measured object and convert it into a usable output signal. Position sensors can be used to detect position, reflect switches in a certain state. Unlike displacement sensors, position sensors come in two types: contact and proximity.

WERNER sensor features

High-precision single-axis tilt angle sensor using capacitive 3D-MEMS technology demonstrates excellent reliability, superior stability, and unprecedented high precision across the entire temperature range. The tilt angle sensor series is designed, produced, and tested according to the reliability and stability requirements of the automotive industry. The series of tilt angle sensors has significant load capacity and very good impact durability without the need for additional components. The tilt sensor is part of the analog acceleration sensor product line and is fully compatible with acceleration sensors. The tilt sensor can adjust the output frequency and has built-in zero adjustment. A zero adjustment button can be customized as required to achieve the function of setting zero at a certain angle. This is very useful for occasions where relative tilt angles need to be measured; after use, it can return to the zero position. When using the tilt sensor in such occasions, simply fix the sensor on a certain plane and use the zero button to clear the data before measurement. The data read by the sensor thereafter will be the relative tilt angle with respect to that plane.

WERNER sensor application areas

Using angle sensors to control your wheels can indirectly detect obstacles. The principle is very simple: if the motor is running but the gear is not turning, it means your machine is blocked by an obstacle. This technology is very simple to use and very effective; the only requirement is that the moving wheels must not slip on the floor (or slip too many times), otherwise you will not be able to detect obstacles. If an idling gear is connected to the motor, this problem can be avoided. This wheel is not driven by the motor but is driven by the movement of the device: during the rotation of the drive wheel, if the idler wheel stops, it means you have hit an obstacle. In many cases, angle sensors are very useful: controlling the position of arms, heads, and other movable parts. It is worth noting that when the operating speed is too slow or too fast, RCX will be affected in terms of precise detection and counting. In fact, the problem is not with RCX itself, but with its operating system. If the speed exceeds its specified range, RCX will lose some data. Steve Baker has proven through experiments that a rotational speed between 50 and 300 rpm is a relatively suitable range, within which there will be no data loss issues. However, in the range below 12rpm or above 1400rpm, some data loss will occur. In the ranges of 12rpm to 50rpm or 300rpm to 1400rpm, RCX may also occasionally experience data loss issues.

WERNER sensor application scenarios

Tilt sensors, angle sensors, distance sensors, acceleration sensors, as well as digital compasses, electronic compasses, and gyroscopes for measuring orientation, have been widely applied in petroleum, coal, steel, ships, tunnels, medical equipment, dams, machinery, geophysical instruments, geology, geotechnical engineering, petroleum, mines, pipelines, inclinometer casings, railways, ports, water conservancy, high-rise buildings, wall cavities, mine shafts, tunnels, docks, anti-slide piles and sheet piles, coal mines, dynamic impact tests, geology, satellite GPS systems, Feng Shui, off-road vehicles, navigation, experimental instruments, digital levels, medical care, mechanical leveling, angle measurement and monitoring, automobiles, crane motion detection, rehabilitation systems, bioengineering systems, virtual reality, reality augmentation, sports, inertial navigation systems, human posture measurement, industrial machinery, motorcycle gyroscopes, fiber optics, guidance, balance, direction finding, direction measurement, dynamic tracking, strapdown, inertia, navigation, azimuth, angular velocity, rate, machinery, burst rotation, measurement, and other industries.

Weidou Intelligent Technology specializes in selling German WERNER sensors, WERNER proximity sensors, WERNER distance sensors, WERNER vision sensors, WERNER displacement sensors, WERNER load cells, WERNER speed sensors, WERNER photoelectric sensors, WERNER position sensors, WERNER angle sensors, WERNER tactile sensors, WERNER temperature sensors, WERNER pressure sensors, WERNER flow sensors, WERNER level sensors, WERNER motion sensors, WERNER process sensors. Original imports from Germany. Welcome customers to inquire and order.