German TVP VZMETNI sensor, TVP VZMETNI model, TVP VZMETNI price

TVP VZMETNI sensor is a sensor that measures the air flow drawn into the engine. For electronically controlled gasoline injection engines, to obtain the optimal mixture concentration under various operating conditions, it is necessary to accurately measure the amount of air drawn into the engine at every instant, using this as the main basis for the ECU to calculate (control) the fuel injection quantity. If the air flow sensor or wiring fails, the ECU will not receive the correct intake air signal, preventing normal control of the fuel injection quantity, which will cause the mixture to be too rich or too lean, resulting in abnormal engine operation.

TVP VZMETNI sensor structure

It consists of two parts: the scale grating and the grating readhead. The figure on the right shows the structure of the grating scale. The key part of the grating detection device is the grating readhead, which consists of a light source, condensing lens, index grating, photoelectric elements, and adjustment mechanisms. There are many structural forms of grating readheads, classified according to their structural characteristics and application scenarios into direct-receiving readheads (also known as silicon photovoltaic cell readheads, mirror-image readheads, beam-splitter readheads, and metal grating reflective readheads).

TVP VZMETNI sensor principle

The essence of a grating displacement sensor is to perform measurement by using the grating pitch as a standard ruler. High-resolution grating scales are generally expensive and difficult to manufacture. To improve system resolution, Moiré fringes need to be subdivided; grating scale sensor systems mostly adopt electronic subdivision methods. When two gratings overlap with a slight angle, Moiré fringes are generated in a direction roughly perpendicular to the grating lines. As the grating moves, the Moiré fringes also move up and down. This converts the measurement of the grating pitch into the measurement of the number of Moiré fringes. Within the width of one Moiré fringe, placing 4 photoelectric devices at certain intervals can achieve electronic subdivision and direction judgment functions. For example, for a grating scale with 50 line pairs/mm, its grating pitch is 0.02mm. If four-fold subdivision is adopted, counting pulses with a resolution of 5μm can be obtained, which has reached a very high precision in general industrial measurement and control. Since displacement is a vector, both its magnitude and direction must be detected; therefore, at least two photoelectric signals with different phases are required. To eliminate common-mode interference, DC components, and even harmonics, differential amplifiers composed of low-drift operational amplifiers are usually used. The 4 photoelectric signals obtained from 4 photosensitive devices are sent to the input terminals of 2 differential amplifiers respectively. The two signals output from the differential amplifier have a phase difference of π/2. To obtain direction judgment and counting pulses, these two signals need to be shaped, first into square waves with a duty cycle of 1:1. Then, by comparing the phase of the square waves, the movement direction of the grating scale can be determined. By counting the square wave pulses, the displacement and speed of the grating scale can be obtained.

TVP VZMETNI sensor usage precautions

When plugging or unplugging the connector between the grating scale sensor and the digital display unit, the power should be turned off. Add a protective cover as much as possible, and promptly clean chips and oil splashed onto the scale to strictly prevent any foreign matter from entering the interior of the grating scale sensor housing. Regularly check whether the installation connecting screws are loose. To extend the life of the dust-proof sealing strip, apply a thin layer of silicone oil evenly on the sealing strip, taking care not to splash it onto the glass grating engraved surface. To ensure the reliability of the grating scale sensor, clean and wipe the grating scale surface and the index grating surface with an ethanol mixture (50% each) at regular intervals to keep the glass grating scale surface clean. Grating scale sensors are strictly prohibited from severe vibration and dropping to avoid damaging the grating scale; if the grating scale breaks, the grating scale sensor will fail. Do not disassemble the grating scale sensor yourself, and do not arbitrarily change the relative spacing between the main grating and the secondary grating; otherwise, it may damage the precision of the grating scale sensor on one hand, and cause relative friction between the main grating and the secondary grating on the other, damaging the chromium layer and thus the grating lines, leading to the scrapping of the grating scale. Care should be taken to prevent oil stains and water from contaminating the grating scale surface to avoid destroying the distribution of grating lines and causing measurement errors. Grating scale sensors should avoid working in environments with severe corrosive effects to prevent corrosion of the grating chromium layer and the grating scale surface, which would degrade the quality of the grating scale.

Weidou Intelligent Technology specializes in selling German TVP VZMETNI sensors, TVP VZMETNI proximity sensors, TVP VZMETNI distance sensors, TVP VZMETNI vision sensors, TVP VZMETNI displacement sensors, TVP VZMETNI load cells, TVP VZMETNI speed sensors, TVP VZMETNI photoelectric sensors, TVP VZMETNI position sensors, TVP VZMETNI angle sensors, TVP VZMETNI tactile sensors, TVP VZMETNI temperature sensors, TVP VZMETNI pressure sensors, TVP VZMETNI flow sensors, TVP VZMETNI level sensors, TVP VZMETNI motion sensors, TVP VZMETNI process sensors. Original imports from Germany. Welcome customers to inquire and order.