German THERMO KING sensors, THERMO KING models, THERMO KING prices

THERMO KING sensors, also known as linear sensors, are linear devices based on metal induction. The function of the sensor is to convert various measured physical quantities into electrical signals. In production processes, displacement measurement is generally divided into two types: measuring physical dimensions and mechanical displacement. Depending on the form of transformation of the measured variable, displacement sensors can be divided into analog and digital types. Analog types can be further divided into property-based and structural types. Commonly used displacement sensors are mostly analog structural types, including potentiometric displacement sensors, inductive displacement sensors, synchros, capacitive displacement sensors, eddy current displacement sensors, Hall effect displacement sensors, etc. An important advantage of digital displacement sensors is that they facilitate direct input of signals into computer systems. These sensors are developing rapidly and their applications are becoming increasingly widespread.

THERMO KING Sensor Classification

1) Laser speed measurement: With the rise of precision manufacturing and the need for cost savings, non-contact speed sensors are gradually replacing contact speed sensors. Currently, the most accurate and commonly used non-contact laser speed sensor on the market is the ZLS-Px aberration speed sensor. The aberration speed sensor has two ports: one emission port that emits a LED light source, and one high-speed photography port that achieves CCD area high-speed imaging comparison. By comparing images at two points in time within an extremely short period, the distance moved by the object under test is determined, and combined with internal algorithms, the sensor outputs the speed of the object in real time. As shown in the figure, (1) is the LED light emission port, (2) is the camera reception port, (3) and (4) are terminal blocks, and (5) are mounting screw holes. The (1) LED light emission port emits laser light toward the object under test, which reflects to the (2) camera reception port. After receiving the signal, it is transmitted to the signal processor, which calculates the speed using algorithms. The ZLS-Px aberration speed sensor can simultaneously measure speed and length in two directions. It can detect not only whether the object under test has stopped but also its direction of motion. Mount the sensor on a stable bracket to ensure that the rotating object does not generate excessive vibration during rotation, thereby allowing measurement of the rotation angle and rotational speed of the object under test. 2) Radar speed measurement: Traditional speed measurement mostly involves rotary motion speed measurement and linear motion speed measurement. However, there are many irregular speed measurements in industrial automation, such as athlete speed measurement, traffic vehicle speed measurement, and golf ball speed measurement. Radar speed sensors can meet these requirements.

THERMO KING Sensor Principle

A transmissive speed sensor consists of a slotted or notched disk, a light source, and a phototube. When the disk rotates with the shaft under test, light can only reach the phototube through the holes or notches. When the phototube is illuminated, its reverse resistance is very low, thus outputting an electrical pulse signal. When the light source is blocked by the disk, the reverse resistance of the phototube is very high, and there is no signal output at the output terminal. In this way, based on the number of holes or notches on the disk, the rotational speed of the shaft under test can be measured. The number of disk holes or notches is usually taken as sixty, so that for each revolution of the shaft under test, the photoelectric converter outputs 60 pulse signals. If the time base signal of the electronic counter is set to 1s, the rotational speed of the shaft under test can be read directly. The principle of a reflective speed sensor is the same as that of a transmissive one; it converts changes in received light into changes in electrical signals via a phototube, but it obtains pulse signals through light reflection, typically by adhering reflective material to the measurement area of the shaft under test to form a reflective surface. Commonly used reflective materials are special speed-measuring reflective tape (adhesive tape), aluminum foil or other reflective materials can also be used as substitutes, and sometimes white paint can be applied to the measurement area to serve as a reflective surface. The emitter and the reflective surface must be properly configured, typically with a distance of 5-15M between them. When the measured shaft rotates, the photoelectric element receives pulsating light, and outputs the corresponding electrical signal to the electronic counter, thereby measuring the rotational speed of the measured shaft. The waveform of the output signal from the photoelectric speed sensor is relatively regular, close to a standard square wave, with almost no interference signals generated. However, for the transmissive type, vibration reduces the service life of the light source, so it is not suitable for use in conditions with strong vibration. The reflective type has no mechanical connection with the measured shaft, making it convenient to use.

THERMO KING Sensor Industry Applications

1) Modern vehicles are generally equipped with engine control, autonomous driving, ABS, TRC, automatic door locking, active suspension, guidance systems, electronic instruments, and other devices, all of which require vehicle speed signals. Therefore, the accuracy and stability of the output signals from speed sensors will greatly affect these control units. Automotive speed sensors mostly adopt a Hall effect structure. A Hall speed sensor is a magneto-electric sensor based on the Hall effect, characterized by high sensitivity to magnetic fields, stable output signals, high frequency response, strong anti-electromagnetic interference capability, simple structure, and ease of use. It mainly consists of permanent magnets with a specific number of pole pairs (generally 4 or 8 pairs), Hall elements, a rotating mechanism, and input/output connectors. Its working principle is that when the sensor's rotating mechanism is driven externally, it drives the permanent magnet to rotate, causing periodic changes in the magnetic field passing through the Hall element. This induces changes in the output voltage of the Hall element, which are processed by subsequent circuits to form stable pulse voltage signals as the output of the speed sensor. Key electrical technical parameters of Hall structure speed sensors include: output signal high voltage, low voltage, duty cycle, period, rise time, fall time, and pulses per cycle. To ensure product performance reliability, these parameters must be quantitatively tested before factory shipment. Test systems featuring integration and intelligence, efficient automatic measurement, software calculation, and graphical or tabular display of results are increasingly favored by automotive speed sensor manufacturers. A comprehensive testing device has been developed for performance measurement of common Hall effect vehicle speed sensors. Considering cost, the high-speed counter port of a microprocessor is used for data acquisition from the vehicle speed sensor, and software control is used to calculate and graphically display the acquired data. The completed testing device offers advantages such as high testing accuracy, reliable data communication, a user-friendly graphical interface, strong anti-interference capability, simple and intuitive testing process, and low system development cost. It has good market promotion potential, indicating significant application prospects for speed sensors in vehicle speed detection. 2) Speed sensors for belt conveyors use Hall sensors, which are sensors that utilize the Hall effect to achieve magneto-electric conversion. The Hall effect was discovered in 1879 and has a development history of over 100 years. However, its application gained attention and widespread adoption in the 50s of this century due to the rapid development of microelectronics, leading to the continuous development of various Hall elements. China began increasing research on Hall elements in the 20s of the 70th century. After nearly several decades of research and development, it is now possible to produce Hall elements with various performances, such as standard type, high sensitivity type, low temperature coefficient type, temperature/magnetic measurement type, and switch type. Due to the characteristics of Hall sensors, such as high sensitivity, good linearity, high stability, small size, and high temperature resistance, they are widely used in various industrial fields including non-electrical quantity measurement, automatic control, computer devices, and modern military technology.

Weidou Intelligent Technology specializes in selling German THERMO KING sensors, THERMO KING proximity sensors, THERMO KING distance sensors, THERMO KING vision sensors, THERMO KING displacement sensors, THERMO KING load cells, THERMO KING speed sensors, THERMO KING photoelectric sensors, THERMO KING position sensors, THERMO KING angle sensors, THERMO KING tactile sensors, THERMO KING temperature sensors, THERMO KING pressure sensors, THERMO KING flow sensors, THERMO KING level sensors, THERMO KING motion sensors, and THERMO KING process sensors. Original imports from Germany. Welcome inquiries and orders from users.