German SURPLEX GMBH sensors, SURPLEX GMBH models, SURPLEX GMBH prices

SURPLEX GMBH sensors are measurement feedback devices that operate based on the optical principle of gratings. Grating scales are frequently used in the closed-loop servo systems of CNC machine tools and can be used to detect linear or angular displacement. The measurement output signal is a digital pulse, characterized by a large detection range, high detection accuracy, and fast response speed. For example, in CNC machine tools, they are often used to detect the coordinates of tools and workpieces to observe and track tool path errors, thereby compensating for tool motion errors. According to different manufacturing methods and optical principles, grating scales are divided into transmission gratings and reflection gratings.

SURPLEX GMBH sensor structure

It consists of two parts: the scale grating and the grating readhead. The figure on the right shows the structure of the grating scale. The key part of the grating detection device is the grating readhead, which consists of a light source, condensing lens, index grating, photoelectric elements, and adjustment mechanisms. There are many structural forms of grating readheads, which are divided into direct-receiving readheads (also known as silicon photovoltaic cell readheads, mirror-image readheads, beam-splitter readheads, and metal grating reflection readheads) based on their structural characteristics and application scenarios.

SURPLEX GMBH sensor principle

The essence of a grating displacement sensor is to measure position using the grating pitch as a standard ruler. High-resolution grating scales are generally expensive and difficult to manufacture. To improve system resolution, Moiré fringes need to be subdivided; grating scale sensor systems mostly use electronic subdivision methods. When two gratings overlap with a slight inclination angle, Moiré fringes are generated in a direction roughly perpendicular to the grating lines. As the grating moves, the Moiré fringes move up and down accordingly. This converts the measurement of the grating pitch into the measurement of the number of Moiré fringes. Within the width of one Moiré fringe, placing 4 photoelectric devices at certain intervals enables electronic subdivision and direction determination. For example, for a grating scale with 50 line pairs/mm, the grating pitch is 0.02mm. If four-fold subdivision is used, counting pulses with a resolution of 5μm can be obtained, which achieves very high accuracy in general industrial measurement and control. Since displacement is a vector, both its magnitude and direction must be detected, so at least two photoelectric signals with different phases are required. To eliminate common-mode interference, DC components, and even harmonics, differential amplifiers composed of low-drift operational amplifiers are typically used. The 4 photoelectric signals obtained from 4 photosensitive devices are sent to the input terminals of 2 differential amplifiers respectively. The two signals output from the differential amplifier have a phase difference of π/2. To obtain direction determination and counting pulses, these two signals need to be shaped, first into square waves with a duty cycle of 1:1. Then, by comparing the phase of the square waves, the movement direction of the grating scale can be determined. By counting the square wave pulses, the displacement and speed of the grating scale can be obtained.

SURPLEX GMBH sensor usage precautions

When plugging and unplugging the connector of the linear scale sensor and the digital readout unit, ensure the power is turned off. Install an external protective cover whenever possible, and promptly remove chips and oil that splash onto the scale to strictly prevent any foreign matter from entering the housing of the linear scale sensor. Regularly check whether the mounting and connection screws are loose. To extend the service life of the dust-proof sealing strip, apply a thin, even layer of silicone oil to the strip, taking care not to let it splash onto the glass grating etched surface. To ensure the reliability of the linear scale sensor, clean and wipe the linear scale surface and the index grating surface at regular intervals with an ethanol mixture (each 50%), keeping the glass linear scale surface clean. The linear scale sensor must not be subjected to severe vibration or impact, as this may damage the linear scale; if the linear scale breaks, the sensor will fail. Do not disassemble the linear scale sensor yourself, and never arbitrarily change the relative spacing between the main grating and the secondary grating. Doing so may compromise the accuracy of the linear scale sensor and cause relative friction between the main and secondary gratings, damaging the chrome layer and thus the grating lines, which renders the linear scale unusable. Take care to prevent oil stains and water from contaminating the linear scale surface, as this can disrupt the distribution of the grating lines and cause measurement errors. Avoid operating the linear scale sensor in environments with severe corrosive effects, to prevent corrosion of the grating chrome layer and the linear scale surface, which would degrade the quality of the linear scale.

Weidou Intelligent Technology professionally sells German SURPLEX GMBH sensors, SURPLEX GMBH proximity sensors, SURPLEX GMBH distance sensors, SURPLEX GMBH vision sensors, SURPLEX GMBH displacement sensors, SURPLEX GMBH load cells, SURPLEX GMBH speed sensors, SURPLEX GMBH photoelectric sensors, SURPLEX GMBH position sensors, SURPLEX GMBH angle sensors, SURPLEX GMBH tactile sensors, SURPLEX GMBH temperature sensors, SURPLEX GMBH pressure sensors, SURPLEX GMBH flow sensors, SURPLEX GMBH level sensors, SURPLEX GMBH motion sensors, SURPLEX GMBH process sensors. Original imports from Germany. Welcome customers to inquire and order.