German REMOMPAP SP sensor, REMOMPAP SP model, REMOMPAP SP price

REMOMPAP SP sensors are sensors that can sense temperature and convert it into a usable output signal. Temperature sensors are the core component of temperature measuring instruments and come in a wide variety. They can be divided into two major categories based on the measurement method: contact and non-contact. Based on sensor materials and electronic component characteristics, they are classified into resistance thermometers and thermocouples. Valve REMOMPAP SP sensor structure

It consists of two parts: the scale grating and the grating readhead. The figure on the right shows the structure of the linear encoder. The key component of the grating detection device is the grating readhead, which comprises a light source, a condensing lens, an index grating, photoelectric elements, and an adjustment mechanism. There are many structural forms of grating readheads. Based on the structural characteristics of the readhead and the application scenarios, they are classified into direct-receiving readheads (also known as silicon photovoltaic cell readheads, mirror-image readheads, beam-splitter readheads, and metal grating reflective readheads).

REMOMPAP SP sensor principle

The essence of a grating displacement sensor is to measure position using the grating pitch as a standard ruler. High-resolution linear encoders are generally expensive and difficult to manufacture. To improve system resolution, Moiré fringes need to be subdivided; grating sensor systems mostly use electronic subdivision methods. When two gratings overlap with a slight angle of inclination, Moiré fringes are generated in a direction roughly perpendicular to the grating lines. As the grating moves, the Moiré fringes also move up and down. This converts the measurement of the grating pitch into the measurement of the number of Moiré fringes. Within the width of one Moiré fringe, placing 4 photoelectric devices at certain intervals can achieve electronic subdivision and direction discrimination functions. For example, for a linear encoder with 50 line pairs/mm, its grating pitch is 0.02mm. If four-fold subdivision is used, counting pulses with a resolution of 5μm can be obtained, which has reached a very high precision in general industrial measurement and control. Since displacement is a vector, both its magnitude and direction must be detected, so at least two photoelectric signals with different phases are required. To eliminate common-mode interference, DC components, and even harmonics, differential amplifiers composed of low-drift operational amplifiers are usually used. The 4 photoelectric signals obtained from 4 photosensitive devices are sent to the input terminals of 2 differential amplifiers respectively. The two signals output from the differential amplifier have a phase difference of π/2. To obtain direction discrimination and counting pulses, these two signals need to be shaped, first into square waves with a duty cycle of 1:1. Then, by comparing the phase of the square waves, the movement direction of the linear encoder can be determined. By counting the square wave pulses, the displacement and speed of the linear encoder can be obtained.

REMOMPAP SP sensor usage precautions

When plugging or unplugging the connector between the linear encoder sensor and the digital display unit, ensure the power is turned off. Install an external protective cover whenever possible, and promptly clean chips and oil splashed onto the scale. Strictly prevent any foreign matter from entering the housing of the linear encoder sensor. Regularly check whether the mounting screws are loose. To extend the service life of the dust-proof sealing strip, apply a thin, even layer of silicone oil to the strip, taking care not to splash it onto the glass grating ruling surface. To ensure the reliability of the linear encoder sensor, clean and wipe the linear encoder scale surface and the index grating surface at regular intervals with an ethanol mixture (50%) to keep the glass grating scale surface clean. The linear encoder sensor must not be subjected to severe vibration or impact, as this may damage the linear encoder; if the linear encoder breaks, the sensor will fail. Do not disassemble the linear encoder sensor yourself, and never arbitrarily change the relative gap between the main grating scale and the secondary grating scale. Otherwise, this may compromise the accuracy of the linear encoder sensor and cause relative friction between the main and secondary grating scales, damaging the chrome layer and thus the grating lines, rendering the linear encoder unusable. Take care to prevent oil and water from contaminating the linear encoder scale surface, as this can disrupt the distribution of the grating lines and cause measurement errors. Avoid operating the linear encoder sensor in environments with severe corrosive effects, to prevent corrosion of the grating chrome layer and the linear encoder surface, which would degrade the quality of the linear encoder.

Weidou Intelligent Technology specializes in selling German REMOMPAP SP sensors, REMOMPAP SP proximity sensors, REMOMPAP SP distance sensors, REMOMPAP SP vision sensors, REMOMPAP SP displacement sensors, REMOMPAP SP load cells, REMOMPAP SP speed sensors, REMOMPAP SP photoelectric sensors, REMOMPAP SP position sensors, REMOMPAP SP angle sensors, REMOMPAP SP tactile sensors, REMOMPAP SP temperature sensors, REMOMPAP SP pressure sensors, REMOMPAP SP flow sensors, REMOMPAP SP level sensors, REMOMPAP SP motion sensors, REMOMPAP SP process sensors. Original imports from Germany. Welcome customers to inquire and order.