German PUTTON ICT sensors, PUTTON ICT models, PUTTON ICT prices

PUTTON ICT sensors, also known as linear sensors, are linear devices based on metal induction. The function of the sensor is to convert various measured physical quantities into electrical signals. In production processes, displacement measurement is generally divided into two types: measuring physical dimensions and mechanical displacement. Depending on the form of transformation of the measured variable, displacement sensors can be divided into analog and digital types. Analog types can be further divided into property-based and structural types. Commonly used displacement sensors are mostly analog structural types, including potentiometric displacement sensors, inductive displacement sensors, synchros, capacitive displacement sensors, eddy current displacement sensors, Hall effect displacement sensors, etc. An important advantage of digital displacement sensors is that they facilitate direct input of signals into computer systems. These sensors are developing rapidly and their applications are becoming increasingly widespread.

PUTTON ICT sensor principles

Photoelectric sensors achieve control by converting changes in light intensity into changes in electrical signals. Generally, a photoelectric sensor consists of three parts: a transmitter, a receiver, and a detection circuit. The transmitter emits a light beam toward the target. The emitted light beam usually comes from semiconductor light sources, such as light-emitting diodes (LED), laser diodes, and infrared emitting diodes. The light beam is emitted continuously or with modulated pulse width. The receiver consists of photodiodes, phototransistors, and photocells. Optical components such as lenses and apertures are installed in front of the receiver. Behind it is the detection circuit, which filters out valid signals and applies them. In addition, the structural components of photoelectric switches also include emitter plates and optical fibers.

PUTTON ICT sensor classification

1) Slot-type photoelectric sensor: A slot-type photoelectric sensor is formed by mounting a light emitter and a receiver face-to-face on opposite sides of a slot. The emitter can emit infrared or visible light, and the receiver can detect the light when there is no obstruction. However, when the detected object passes through the slot, the light is blocked, causing the photoelectric switch to actuate and output a switching control signal, thereby cutting off or connecting the load current to complete a control action. Due to limitations imposed by the overall structure, the detection distance of slot-type switches is generally only a few centimeters. 2) Through-beam photoelectric sensor: Separating the emitter and the receiver allows for an increased detection distance. A through-beam separated photoelectric switch, abbreviated as a through-beam photoelectric switch, consists of one emitter and one receiver. The detection distance of through-beam photoelectric switches can reach several meters or even tens of meters. When using a through-beam photoelectric switch, the emitter and receiver are installed on opposite sides of the path through which the detected object passes. When the object passes through and blocks the light path, the receiver actuates and outputs a switching control signal. 3) Retro-reflective photoelectric switch: The emitter and receiver are housed in the same unit, with a reflector plate installed in front. This setup utilizes the principle of reflection to achieve photoelectric control and is called a retro-reflective (or mirror-reflective) photoelectric switch. Under normal conditions, the light emitted by the emitter is reflected back by the reflector plate and received by the receiver. Once the detected object blocks the light path and the receiver no longer receives light, the photoelectric switch actuates and outputs a switching control signal. 4) Diffuse-reflective photoelectric switch: The detection head of a diffuse-reflective photoelectric switch also contains an emitter and a receiver, but there is no reflector plate in front. Under normal conditions, the receiver cannot detect the light emitted by the emitter. During detection, when an object passes through, it blocks the light and reflects part of it back. The receiver then detects the light signal and outputs a switching signal.

PUTTON ICT sensor application cases

1) Application of photoelectric sensors in laser weapons: Since photoelectric sensors are particularly sensitive to infrared radiation, visible light, or both, they are more likely to become targets of laser attacks. Furthermore, electronic systems and the sensors themselves are highly susceptible to interference from thermal noise and electromagnetic noise generated by lasers, which can prevent normal operation. The main methods by which laser weapons on the battlefield attack photoelectric sensors include: using a laser beam of appropriate energy to "blind" the sensor, rendering it unable to detect or continue tracking already detected targets. Alternatively, if the sensor is guiding a weapon toward a target, blinding will cause it to lose the target. In summary, because sensors play an increasingly important role on the battlefield and are vulnerable to laser attacks, they have become the preferred targets for low-energy laser weapons. 2) Application of photoelectric sensors in automatic meter reading systems: With the development of microelectronics, sensor technology, computer technology, and modern communication technology, photoelectric sensors can be used to develop automatic meter reading systems. The aluminum disk of an electricity meter rotates under the torque generated by the interaction of eddy currents and magnetic fields. Using a photoelectric sensor allows the number of rotations of the aluminum disk to be converted into pulse counts. For example, by partially blackening a section of the rotating shiny aluminum disk and pairing it with a reflective photoelectric emitter-receiver pair, pulses are generated at the blackened section as the disk rotates. The number of rotations is sampled and converted into corresponding pulse counts, which are then sent via an optocoupler isolation circuit to the T0 port of the CPU for counting processing. Using optocoupler isolators effectively prevents interference signals from entering the microcomputer. Combined with other transmission methods, this forms an automatic meter reading system. 3) Application of photoelectric sensors in monitoring smoke and dust pollution: A photoelectric sensor is a small electronic device that detects changes in received light intensity and achieves control functions by converting these changes into electrical signals. Due to characteristics such as non-contact operation, fast response, and reliable performance, photoelectric sensors are widely used in industrial automation equipment and robotics. We can utilize the characteristics of photoelectric sensors to detect smoke and dust conditions; thus, the strength of the output signal from the photoelectric sensor reflects changes in flue gas turbidity. 4) Hygienic washdown-resistant photoelectric sensors: Washdown-resistant sensors provide extremely high reliability and ease of use while minimizing operating costs. Equipped with IO-Link interfaces and the proTect+ sealing concept, which significantly extends service life, these two new sensors are suitable for demanding application environments and represent an ideal solution for the food and beverage industry.

Weidou Intelligent Technology specializes in selling German PUTTON ICT sensors, PUTTON ICT proximity sensors, PUTTON ICT distance sensors, PUTTON ICT vision sensors, PUTTON ICT displacement sensors, PUTTON ICT load cells, PUTTON ICT speed sensors, PUTTON ICT photoelectric sensors, PUTTON ICT position sensors, PUTTON ICT angle sensors, PUTTON ICT tactile sensors, PUTTON ICT temperature sensors, PUTTON ICT pressure sensors, PUTTON ICT flow sensors, PUTTON ICT level sensors, PUTTON ICT motion sensors, and PUTTON ICT process sensors. All products are original imports from Germany. Customers are welcome to inquire and place orders.